ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-03-12 07:24:22 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
openwrt/target/linux/apm821xx/sata/target.mk

11 lines
368 B
Makefile
Raw Normal View History

apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 15:44:54 +02:00
BOARDNAME := Devices which boot from SATA (NAS)
apm821xx: set DEVICE_TYPE to "nas" for sata subtarget Since DEVICE_TYPE cannot be set per device, just set DEVICE_TYPE to "nas" for the entire subtarget, which only contains this single device. Note that while this looks like a cosmetic change in combination with the previous patches, this particular patch actually changes the packages for the device. Suggested-by: Christian Lamparter <chunkeey@gmail.com> Cc: Christian Lamparter <chunkeey@gmail.com> Cc: Sungbo Eo <mans0n@gorani.run> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-30 11:21:08 +02:00
DEVICE_TYPE := nas
apm821xx: clean up target/subtarget features Move features common to all subtargets to the parent target. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> [split patch to make it target-specific, adjust commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-25 09:38:51 +00:00
FEATURES += boot-part ext4 rootfs-part
apm821xx: add drivetemp sensor for the WD MyBook Series This patch adds the hwmon-drivetemp to the device. It also adds device-tree bindings. This can be useful to automate external fans which can be controlled for example by either an unused sata-port or by the usb-power regulator. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-03-21 20:58:16 +01:00
DEFAULT_PACKAGES += badblocks block-mount e2fsprogs kmod-hwmon-drivetemp \
apm821xx: build squashfs-rootfs images for the MBL This patch adds support for squashfs as the root filesystem. advantages: - migrate from a existing -ext4 installation and back with the sysupgrade utility - existing partition layout will not be lost during switch - slightly smaller image size as compared to the -ext4 image. disadvantages: - needs f2fs + tools. This is because fstools rootdisk.c decides based on the partition size (currently root partitions > 100 MiB) f2fs is used as the rootfs_data filesystem. - rootfs_data is placed into the rootfs partition after the squashfs. This makes it difficult for tools that expect a /dev/sda${X} device. It also makes it difficult for data recovery tools as they might not expect to find a embedded partition or will be slightly confused. ... or will not support f2fs. For people with existing build configurations: make sure to include mkf2fs and f2fsck packages into the image. Otherwise the new -squashfs image will only boot from the ram-overlay. Note: All overlay data (configurations/all installed packages/...) will be placed in inside the rootfs partition (i.e. /dev/sda2) just after the squashfs image. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-29 11:55:15 +02:00
kmod-dm kmod-md-mod partx-utils mkf2fs f2fsck
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 15:44:54 +02:00
define Target/Description
Build firmware images for APM82181 boards that boot from SATA.
For NAS like the MyBook Live Series.
endef
Reference in New Issue Copy Permalink