mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
42 lines
1.7 KiB
Diff
42 lines
1.7 KiB
Diff
|
From 2c90367440a0dbf9962e7a7f701b0e7a320d325a Mon Sep 17 00:00:00 2001
|
||
|
|
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
||
|
|
Date: Fri, 13 Oct 2017 17:10:48 +0800
|
||
|
|
Subject: [PATCH 114/224] dt-bindings: usb: mtu3: remove dummy clocks and add
|
||
|
|
optional ones
|
||
|
|
|
||
|
|
Remove dummy clocks for usb wakeup and add optional ones for
|
||
|
|
mcu_bus and dma_bus bus.
|
||
|
|
|
||
|
|
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
||
|
|
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
||
|
|
---
|
||
|
|
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 10 ++++------
|
||
|
|
1 file changed, 4 insertions(+), 6 deletions(-)
|
||
|
|
|
||
|
|
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
|
||
|
|
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
|
||
|
|
@@ -14,9 +14,9 @@ Required properties:
|
||
|
|
- vusb33-supply : regulator of USB avdd3.3v
|
||
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
||
|
|
entry in clock-names
|
||
|
|
- - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
|
||
|
|
- "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
|
||
|
|
- depends on "mediatek,enable-wakeup"
|
||
|
|
+ - clock-names : must contain "sys_ck" for clock of controller,
|
||
|
|
+ the following clocks are optional:
|
||
|
|
+ "ref_ck", "mcu_ck" and "dam_ck";
|
||
|
|
- phys : a list of phandle + phy specifier pairs
|
||
|
|
- dr_mode : should be one of "host", "peripheral" or "otg",
|
||
|
|
refer to usb/generic.txt
|
||
|
|
@@ -65,9 +65,7 @@ ssusb: usb@11271000 {
|
||
|
|
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
|
||
|
|
<&pericfg CLK_PERI_USB0>,
|
||
|
|
<&pericfg CLK_PERI_USB1>;
|
||
|
|
- clock-names = "sys_ck", "ref_ck",
|
||
|
|
- "wakeup_deb_p0",
|
||
|
|
- "wakeup_deb_p1";
|
||
|
|
+ clock-names = "sys_ck", "ref_ck";
|
||
|
|
vusb33-supply = <&mt6397_vusb_reg>;
|
||
|
|
vbus-supply = <&usb_p0_vbus>;
|
||
|
|
extcon = <&extcon_usb>;
|