openwrt/target/linux/brcm2708/patches-4.19/950-0705-overlays-Add-i2c0-and-i2c1-for-regularity.patch

From 9c0f4b3e3b197d5c81f4bd6679f2c2456ab45c9e Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Wed, 17 Jul 2019 10:08:55 +0100
Subject: [PATCH 705/806] overlays: Add i2c0 and i2c1 for regularity

The new i2c overlays for pi4 (i2c3, i2c4, i2c5, i2c6) have a
standardised interface that allows pin groups to be chosen
atomically rather than as individual pins. Add i2c0 and i2c1
overlays to fit the naming scheme and parameter usage, deprecating
i2c0-bcm2708 and i2c1-bcm2708.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
 arch/arm/boot/dts/overlays/Makefile           |  2 +
 arch/arm/boot/dts/overlays/README             | 33 +++++---
 .../dts/overlays/i2c0-bcm2708-overlay.dts     | 77 +++----------------
 arch/arm/boot/dts/overlays/i2c0-overlay.dts   | 61 +++++++++++++++
 .../dts/overlays/i2c1-bcm2708-overlay.dts     | 46 ++---------
 arch/arm/boot/dts/overlays/i2c1-overlay.dts   | 44 +++++++++++
 6 files changed, 147 insertions(+), 116 deletions(-)
 create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -66,7 +66,9 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	i2c-rtc.dtbo \
 	i2c-rtc-gpio.dtbo \
 	i2c-sensor.dtbo \
+	i2c0.dtbo \
 	i2c0-bcm2708.dtbo \
+	i2c1.dtbo \
 	i2c1-bcm2708.dtbo \
 	i2c3.dtbo \
 	i2c4.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1151,14 +1151,12 @@ Params: addr                    Set the
                                 sensor
 
 
-Name:   i2c0-bcm2708
+Name:   i2c0
 Info:   Change i2c0 pin usage. Not all pin combinations are usable on all
         platforms - platforms other then Compute Modules can only use this
         to disable transaction combining.
-Load:   dtoverlay=i2c0-bcm2708,<param>=<val>
-Params: sda0_pin                GPIO pin for SDA0 (deprecated - use pins_*)
-        scl0_pin                GPIO pin for SCL0 (deprecated - use pins_*)
-        pins_0_1                Use pins 0 and 1 (default)
+Load:   dtoverlay=i2c0,<param>=<val>
+Params: pins_0_1                Use pins 0 and 1 (default)
         pins_28_29              Use pins 28 and 29
         pins_44_45              Use pins 44 and 45
         pins_46_47              Use pins 46 and 47
@@ -1166,18 +1164,33 @@ Params: sda0_pin                GPIO pin
                                 "yes")
 
 
-Name:   i2c1-bcm2708
+Name:   i2c0-bcm2708
+Info:   Deprecated, legacy version of i2c0, from which it inherits its
+        parameters, just adding the explicit individual pin specifiers.
+Load:   <Deprecated>
+Params: sda0_pin                GPIO pin for SDA0 (deprecated - use pins_*)
+        scl0_pin                GPIO pin for SCL0 (deprecated - use pins_*)
+
+
+Name:   i2c1
 Info:   Change i2c1 pin usage. Not all pin combinations are usable on all
         platforms - platforms other then Compute Modules can only use this
         to disable transaction combining.
-Info:   Enable the i2c_bcm2708 driver for the i2c1 bus
-Load:   dtoverlay=i2c1-bcm2708,<param>=<val>
+Load:   dtoverlay=i2c1,<param>=<val>
+Params: pins_2_3                Use pins 2 and 3 (default)
+        pins_44_45              Use pins 44 and 45
+        combine                 Allow transactions to be combined (default
+                                "yes")
+
+
+Name:   i2c1-bcm2708
+Info:   Deprecated, legacy version of i2c1, from which it inherits its
+        parameters, just adding the explicit individual pin specifiers.
+Load:   <Deprecated>
 Params: sda1_pin                GPIO pin for SDA1 (2 or 44 - default 2)
         scl1_pin                GPIO pin for SCL1 (3 or 45 - default 3)
         pin_func                Alternative pin function (4 (alt0), 6 (alt2) -
                                 default 4)
-        combine                 Allow transactions to be combined (default
-                                "yes")
 
 
 Name:   i2c3
--- a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts
@@ -1,69 +1,14 @@
-/*
- * Device tree overlay for i2c_bcm2708, i2c0 bus
- *
- * Compile:
- * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts
- */
-
-/dts-v1/;
-/plugin/;
+#include "i2c0-overlay.dts"
 
 /{
-   compatible = "brcm,bcm2835";
-
-   fragment@0 {
-      target = <&i2c0>;
-      __overlay__ {
-         status = "okay";
-      };
-   };
-
-   fragment@1 {
-      target = <&i2c0_pins>;
-      frag1: __overlay__ {
-         brcm,pins = <0 1>;
-         brcm,function = <4>; /* alt0 */
-      };
-   };
-
-   fragment@2 {
-      target = <&i2c0_pins>;
-      __dormant__ {
-         brcm,pins = <28 29>;
-         brcm,function = <4>; /* alt0 */
-      };
-   };
-
-   fragment@3 {
-      target = <&i2c0_pins>;
-      __dormant__ {
-         brcm,pins = <44 45>;
-         brcm,function = <5>; /* alt1 */
-      };
-   };
-
-   fragment@4 {
-      target = <&i2c0_pins>;
-      __dormant__ {
-         brcm,pins = <46 47>;
-         brcm,function = <4>; /* alt0 */
-      };
-   };
-
-   fragment@5 {
-      target = <&i2c0>;
-      __dormant__ {
-         compatible = "brcm,bcm2708-i2c";
-      };
-   };
-
-   __overrides__ {
-      sda0_pin = <&frag1>,"brcm,pins:0";
-      scl0_pin = <&frag1>,"brcm,pins:4";
-      pins_0_1   = <0>,"+1-2-3-4";
-      pins_28_29 = <0>,"-1+2-3-4";
-      pins_44_45 = <0>,"-1-2+3-4";
-      pins_46_47 = <0>,"-1-2-3+4";
-      combine = <0>, "!5";
-   };
+	__overrides__ {
+		sda0_pin = <&pins1>,"brcm,pins:0",
+			   <&pins2>,"brcm,pins:0",
+			   <&pins3>,"brcm,pins:0",
+			   <&pins4>,"brcm,pins:0";
+		scl0_pin = <&pins1>,"brcm,pins:4",
+			   <&pins2>,"brcm,pins:4",
+			   <&pins3>,"brcm,pins:4",
+			   <&pins4>,"brcm,pins:4";
+	};
 };
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c0-overlay.dts
@@ -0,0 +1,61 @@
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c0>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-0 = <&i2c0_pins>;
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c0_pins>;
+		pins1: __overlay__ {
+			brcm,pins = <0 1>;
+			brcm,function = <4>; /* alt0 */
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0_pins>;
+		pins2: __dormant__ {
+			brcm,pins = <28 29>;
+			brcm,function = <4>; /* alt0 */
+		};
+	};
+
+	fragment@3 {
+		target = <&i2c0_pins>;
+		pins3: __dormant__ {
+			brcm,pins = <44 45>;
+			brcm,function = <5>; /* alt1 */
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c0_pins>;
+		pins4: __dormant__ {
+			brcm,pins = <46 47>;
+			brcm,function = <4>; /* alt0 */
+		};
+	};
+
+	fragment@5 {
+		target = <&i2c0>;
+		__dormant__ {
+			compatible = "brcm,bcm2708-i2c";
+		};
+	};
+
+	__overrides__ {
+		pins_0_1   = <0>,"+1-2-3-4";
+		pins_28_29 = <0>,"-1+2-3-4";
+		pins_44_45 = <0>,"-1-2+3-4";
+		pins_46_47 = <0>,"-1-2-3+4";
+		combine = <0>, "!5";
+	};
+};
--- a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts
+++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts
@@ -1,43 +1,9 @@
-/*
- * Device tree overlay for i2c_bcm2708, i2c1 bus
- *
- * Compile:
- * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts
- */
-
-/dts-v1/;
-/plugin/;
+#include "i2c1-overlay.dts"
 
 /{
-   compatible = "brcm,bcm2835";
-
-   fragment@0 {
-      target = <&i2c1>;
-      __overlay__ {
-         pinctrl-0 = <&i2c1_pins>;
-         status = "okay";
-      };
-   };
-
-   fragment@1 {
-      target = <&i2c1_pins>;
-         pins: __overlay__ {
-         brcm,pins = <2 3>;
-         brcm,function = <4>; /* alt 0 */
-      };
-   };
-
-   fragment@2 {
-      target = <&i2c1>;
-      __dormant__ {
-         compatible = "brcm,bcm2708-i2c";
-      };
-   };
-
-   __overrides__ {
-      sda1_pin = <&pins>,"brcm,pins:0";
-      scl1_pin = <&pins>,"brcm,pins:4";
-      pin_func = <&pins>,"brcm,function:0";
-      combine = <0>, "!2";
-   };
+	__overrides__ {
+		sda1_pin = <&pins1>,"brcm,pins:0", <&pins2>,"brcm,pins:0";
+		scl1_pin = <&pins1>,"brcm,pins:4", <&pins1>,"brcm,pins:4";
+		pin_func = <&pins1>,"brcm,function:0", <&pins2>,"brcm,function:0";
+	};
 };
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/i2c1-overlay.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c1>;
+		__overlay__ {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1_pins>;
+		pins1: __overlay__ {
+			brcm,pins = <2 3>;
+			brcm,function = <4>; /* alt 0 */
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c1_pins>;
+		pins2: __dormant__ {
+			brcm,pins = <44 45>;
+			brcm,function = <6>; /* alt 2 */
+		};
+	};
+
+	fragment@3 {
+		target = <&i2c1>;
+		__dormant__ {
+			compatible = "brcm,bcm2708-i2c";
+		};
+	};
+
+	__overrides__ {
+		pins_2_3   = <0>,"=1!2";
+		pins_44_45 = <0>,"!1=2";
+		combine = <0>, "!3";
+	};
+};