openwrt/target/linux/brcm2708/patches-4.19/950-0537-thermal-brcmstb_thermal-Add-BCM2838-support.patch

From d49649e2dcf0d5775e92677d37e229e0387fe82a Mon Sep 17 00:00:00 2001
From: Stefan Wahren <wahrenst@gmx.net>
Date: Sat, 18 May 2019 12:26:11 +0200
Subject: [PATCH 537/806] thermal: brcmstb_thermal: Add BCM2838 support

The BCM2838 has an AVS TMON hardware block. This adds the necessary
support to the brcmstb_thermal driver ( no trip handling ).

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/thermal/broadcom/Kconfig           |  2 +-
 drivers/thermal/broadcom/brcmstb_thermal.c | 65 +++++++++++++++++++---
 2 files changed, 58 insertions(+), 9 deletions(-)

--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -8,7 +8,7 @@ config BCM2835_THERMAL
 
 config BRCMSTB_THERMAL
 	tristate "Broadcom STB AVS TMON thermal driver"
-	depends on ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 	help
 	  Enable this driver if you have a Broadcom STB SoC and would like
 	  thermal framework support.
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -19,6 +19,7 @@
 #define pr_fmt(fmt)	DRV_NAME ": " fmt
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -31,9 +32,6 @@
 #include <linux/thermal.h>
 
 #define AVS_TMON_STATUS			0x00
- #define AVS_TMON_STATUS_valid_msk	BIT(11)
- #define AVS_TMON_STATUS_data_msk	GENMASK(10, 1)
- #define AVS_TMON_STATUS_data_shift	1
 
 #define AVS_TMON_EN_OVERTEMP_RESET	0x04
  #define AVS_TMON_EN_OVERTEMP_RESET_msk	BIT(0)
@@ -111,10 +109,19 @@ static struct avs_tmon_trip avs_tmon_tri
 	},
 };
 
+struct brcmstb_thermal_of_data {
+	const struct thermal_zone_of_device_ops *of_ops;
+	u32 status_valid_mask;
+	u32 status_data_mask;
+	u32 status_data_shift;
+};
+
 struct brcmstb_thermal_priv {
 	void __iomem *tmon_base;
 	struct device *dev;
 	struct thermal_zone_device *thermal;
+	struct clk *clk;
+	const struct brcmstb_thermal_of_data *socdata;
 };
 
 static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
@@ -164,17 +171,18 @@ static inline u32 avs_tmon_temp_to_code(
 static int brcmstb_get_temp(void *data, int *temp)
 {
 	struct brcmstb_thermal_priv *priv = data;
+	const struct brcmstb_thermal_of_data *socdata = priv->socdata;
 	u32 val;
 	long t;
 
 	val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
 
-	if (!(val & AVS_TMON_STATUS_valid_msk)) {
+	if (!(val & socdata->status_valid_mask)) {
 		dev_err(priv->dev, "reading not valid\n");
 		return -EIO;
 	}
 
-	val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+	val = (val & socdata->status_data_mask) >> socdata->status_data_shift;
 
 	t = avs_tmon_code_to_temp(priv->thermal, val);
 	if (t < 0)
@@ -299,13 +307,34 @@ static int brcmstb_set_trips(void *data,
 	return 0;
 }
 
-static struct thermal_zone_of_device_ops of_ops = {
+static const struct thermal_zone_of_device_ops bcm7445_thermal_of_ops = {
 	.get_temp	= brcmstb_get_temp,
 	.set_trips	= brcmstb_set_trips,
 };
 
+static const struct thermal_zone_of_device_ops bcm2838_thermal_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+};
+
+static const struct brcmstb_thermal_of_data bcm7445_thermal_of_data = {
+	.of_ops = &bcm7445_thermal_of_ops,
+	.status_valid_mask = BIT(11),
+	.status_data_mask = GENMASK(10, 1),
+	.status_data_shift = 1,
+};
+
+static const struct brcmstb_thermal_of_data bcm2838_thermal_of_data = {
+	.of_ops = &bcm2838_thermal_of_ops,
+	.status_valid_mask = BIT(10),
+	.status_data_mask = GENMASK(9, 0),
+	.status_data_shift = 0,
+};
+
 static const struct of_device_id brcmstb_thermal_id_table[] = {
-	{ .compatible = "brcm,avs-tmon" },
+	{ .compatible = "brcm,avs-tmon",
+	  .data = &bcm7445_thermal_of_data },
+	{ .compatible = "brcm,avs-tmon-bcm2838",
+	  .data = &bcm2838_thermal_of_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
@@ -326,10 +355,27 @@ static int brcmstb_thermal_probe(struct
 	if (IS_ERR(priv->tmon_base))
 		return PTR_ERR(priv->tmon_base);
 
+	priv->socdata = of_device_get_match_data(&pdev->dev);
+	if (!priv->socdata) {
+		dev_err(&pdev->dev, "no device match found\n");
+		return -ENODEV;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (!IS_ERR(priv->clk)) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret)
+			return ret;
+	}
+
 	priv->dev = &pdev->dev;
 	platform_set_drvdata(pdev, priv);
 
-	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
+						  priv->socdata->of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
@@ -369,6 +415,9 @@ static int brcmstb_thermal_exit(struct p
 	if (thermal)
 		thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
 
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+
 	return 0;
 }