ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 08:51:13 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
909cc6ef5f
openwrt/target/linux/realtek/dts-5.15/rtl8393_zyxel_gs1900-48.dts

321 lines
6.3 KiB
Plaintext
Raw Normal View History

realtek: copy dts/files/patches/configs for 5.15 Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-09-09 13:08:16 +00:00
/dts-v1/;
#include "rtl839x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "zyxel,gs1900-48", "realtek,rtl8393-soc";
model = "Zyxel GS1900-48";
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
realtek: fix dts whitespace Remove whitespace from otherwise empty lines Signed-off-by: Felix Baumann <felix.bau@gmx.de>
2023-02-08 02:48:20 +00:00
};
realtek: copy dts/files/patches/configs for 5.15 Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-09-09 13:08:16 +00:00
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_disable_sys_led>;
compatible = "gpio-leds";
led_sys: sys {
label = "green:sys";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
};
gpio1: rtl8231-gpio {
compatible = "realtek,rtl8231-gpio";
#gpio-cells = <2>;
indirect-access-bus-id = <3>;
gpio-controller;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
mode {
label = "reset";
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
/* i2c of the left SFP cage: port 49 */
i2c0: i2c-gpio-0 {
compatible = "i2c-gpio";
sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
sfp0: sfp-p9 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
};
/* i2c of the right SFP cage: port 50 */
i2c1: i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
sfp1: sfp-p10 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "u-boot-env2";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "jffs";
reg = <0x60000 0x100000>;
};
partition@160000 {
label = "jffs2";
reg = <0x160000 0x100000>;
};
realtek: fix GS1900-48 firwmare partition The listed partition size doesn't match the original partition size, and actually overlaps with the following partition. The partition node name for the "firmware" partition also has an extra 'b' compared to the partition offset. Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-12-28 11:26:21 +00:00
partition@260000 {
realtek: copy dts/files/patches/configs for 5.15 Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-09-09 13:08:16 +00:00
label = "firmware";
realtek: fix GS1900-48 firwmare partition The listed partition size doesn't match the original partition size, and actually overlaps with the following partition. The partition node name for the "firmware" partition also has an extra 'b' compared to the partition offset. Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch") Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-12-28 11:26:21 +00:00
reg = <0x260000 0x6d0000>;
realtek: copy dts/files/patches/configs for 5.15 Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-09-09 13:08:16 +00:00
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x83800000>;
};
partition@930000 {
label = "runtime2";
reg = <0x930000 0x6d0000>;
};
};
};
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
realtek: fix dts whitespace Remove whitespace from otherwise empty lines Signed-off-by: Felix Baumann <felix.bau@gmx.de>
2023-02-08 02:48:20 +00:00
realtek: copy dts/files/patches/configs for 5.15 Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-09-09 13:08:16 +00:00
/* External phy RTL8218B #1 */
EXTERNAL_PHY(0)
EXTERNAL_PHY(1)
EXTERNAL_PHY(2)
EXTERNAL_PHY(3)
EXTERNAL_PHY(4)
EXTERNAL_PHY(5)
EXTERNAL_PHY(6)
EXTERNAL_PHY(7)
/* External phy RTL8218B #2 */
EXTERNAL_PHY(8)
EXTERNAL_PHY(9)
EXTERNAL_PHY(10)
EXTERNAL_PHY(11)
EXTERNAL_PHY(12)
EXTERNAL_PHY(13)
EXTERNAL_PHY(14)
EXTERNAL_PHY(15)
/* External phy RTL8218B #3 */
EXTERNAL_PHY(16)
EXTERNAL_PHY(17)
EXTERNAL_PHY(18)
EXTERNAL_PHY(19)
EXTERNAL_PHY(20)
EXTERNAL_PHY(21)
EXTERNAL_PHY(22)
EXTERNAL_PHY(23)
/* External phy RTL8218B #4 */
EXTERNAL_PHY(24)
EXTERNAL_PHY(25)
EXTERNAL_PHY(26)
EXTERNAL_PHY(27)
EXTERNAL_PHY(28)
EXTERNAL_PHY(29)
EXTERNAL_PHY(30)
EXTERNAL_PHY(31)
/* External phy RTL8218B #5 */
EXTERNAL_PHY(32)
EXTERNAL_PHY(33)
EXTERNAL_PHY(34)
EXTERNAL_PHY(35)
EXTERNAL_PHY(36)
EXTERNAL_PHY(37)
EXTERNAL_PHY(38)
EXTERNAL_PHY(39)
/* External phy RTL8218B #6 */
EXTERNAL_PHY(40)
EXTERNAL_PHY(41)
EXTERNAL_PHY(42)
EXTERNAL_PHY(43)
EXTERNAL_PHY(44)
EXTERNAL_PHY(45)
EXTERNAL_PHY(46)
EXTERNAL_PHY(47)
/* RTL8393 Internal SerDes */
INTERNAL_PHY(48)
INTERNAL_PHY(49)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(0, 01, qsgmii)
SWITCH_PORT(1, 02, qsgmii)
SWITCH_PORT(2, 03, qsgmii)
SWITCH_PORT(3, 04, qsgmii)
SWITCH_PORT(4, 05, qsgmii)
SWITCH_PORT(5, 06, qsgmii)
SWITCH_PORT(6, 07, qsgmii)
SWITCH_PORT(7, 08, qsgmii)
SWITCH_PORT(8, 09, qsgmii)
SWITCH_PORT(9, 10, qsgmii)
SWITCH_PORT(10, 11, qsgmii)
SWITCH_PORT(11, 12, qsgmii)
SWITCH_PORT(12, 13, qsgmii)
SWITCH_PORT(13, 14, qsgmii)
SWITCH_PORT(14, 15, qsgmii)
SWITCH_PORT(15, 16, qsgmii)
SWITCH_PORT(16, 17, qsgmii)
SWITCH_PORT(17, 18, qsgmii)
SWITCH_PORT(18, 19, qsgmii)
SWITCH_PORT(19, 20, qsgmii)
SWITCH_PORT(20, 21, qsgmii)
SWITCH_PORT(21, 22, qsgmii)
SWITCH_PORT(22, 23, qsgmii)
SWITCH_PORT(23, 24, qsgmii)
SWITCH_PORT(24, 25, qsgmii)
SWITCH_PORT(25, 26, qsgmii)
SWITCH_PORT(26, 27, qsgmii)
SWITCH_PORT(27, 28, qsgmii)
SWITCH_PORT(28, 29, qsgmii)
SWITCH_PORT(29, 30, qsgmii)
SWITCH_PORT(30, 31, qsgmii)
SWITCH_PORT(31, 32, qsgmii)
SWITCH_PORT(32, 33, qsgmii)
SWITCH_PORT(33, 34, qsgmii)
SWITCH_PORT(34, 35, qsgmii)
SWITCH_PORT(35, 36, qsgmii)
SWITCH_PORT(36, 37, qsgmii)
SWITCH_PORT(37, 38, qsgmii)
SWITCH_PORT(38, 39, qsgmii)
SWITCH_PORT(39, 40, qsgmii)
SWITCH_PORT(40, 41, qsgmii)
SWITCH_PORT(41, 42, qsgmii)
SWITCH_PORT(42, 43, qsgmii)
SWITCH_PORT(43, 44, qsgmii)
SWITCH_PORT(44, 45, qsgmii)
SWITCH_PORT(45, 46, qsgmii)
SWITCH_PORT(46, 47, qsgmii)
SWITCH_PORT(47, 48, qsgmii)
/* SFP cages */
port@48 {
reg = <48>;
label = "lan49";
phy-mode = "sgmii";
phy-handle = <&phy48>;
sfp = <&sfp0>;
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
port@49 {
reg = <49>;
label = "lan50";
phy-mode = "sgmii";
phy-handle = <&phy49>;
sfp = <&sfp1>;
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
/* CPU-Port */
port@52 {
ethernet = <&ethernet0>;
reg = <52>;
phy-mode = "qsgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
Reference in New Issue Copy Permalink