openwrt/target/linux/ath79/dts/qca9531_asus_rp-ac51.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca953x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "ASUS RP-AC51";
	compatible = "asus,rp-ac51", "qca,qca9531";

	aliases {
		led-boot = &led_wps;
		led-failsafe = &led_wps;
		led-running = &led_wps;
		led-upgrade = &led_wps;
		label-mac-device = &eth0;
	};

	keys {
		compatible = "gpio-keys";

		wps {
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "blue:power";
			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
		};

		led_wps: wps {
			label = "red:wps";
			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		};

		lan {
			label = "blue:lan";
			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
		};

		wlan2g {
			label = "blue:wlan2g";
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		};

		wlan5g {
			label = "blue:wlan5g";
			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
		};
	};
};

&pcie0 {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x40000>;
				read-only;
			};

			partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x10000>;
				read-only;
			};

			art: partition@50000 {
				label = "art";
				reg = <0x050000 0x10000>;
				read-only;

				compatible = "nvmem-cells";
				#address-cells = <1>;
				#size-cells = <1>;

				macaddr_art_0: macaddr@0 {
					reg = <0x0 0x6>;
				};

				macaddr_art_1002: macaddr@1002 {
					reg = <0x1002 0x6>;
				};
			};

			partition@60000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x060000 0xfa0000>;
			};
		};
	};
};

&eth0 {
	status = "okay";

	phy-handle = <&swphy4>;

	nvmem-cells = <&macaddr_art_0>;
	nvmem-cell-names = "mac-address";
};

&eth1 {
	nvmem-cells = <&macaddr_art_1002>;
	nvmem-cell-names = "mac-address";
};

&wmac {
	status = "okay";

	qca,no-eeprom;
};