openwrt/target/linux/bcm27xx/patches-5.15/950-0844-clk-Take-into-account-uncached-clocks-in-clk_set_rat.patch

From 4ec4cfbf63a697a5b1c82b400d28afd0347d555a Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Fri, 8 Apr 2022 10:06:11 +0200
Subject: [PATCH] clk: Take into account uncached clocks in
 clk_set_rate_range()

clk_set_rate_range() will use the last requested rate for the clock when
it calls into the driver set_rate hook.

However, if CLK_GET_RATE_NOCACHE is set on that clock, the last
requested rate might not be matching the current rate of the clock. In
such a case, let's read out the rate from the hardware and use that in
our set_rate instead.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      |  6 +++++-
 drivers/clk/clk_test.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2379,6 +2379,10 @@ static int clk_set_rate_range_nolock(str
 		goto out;
 	}
 
+	rate = clk->core->req_rate;
+	if (clk->core->flags & CLK_GET_RATE_NOCACHE)
+		rate = clk_core_get_rate_recalc(clk->core);
+
 	/*
 	 * Since the boundaries have been changed, let's give the
 	 * opportunity to the provider to adjust the clock rate based on
@@ -2396,7 +2400,7 @@ static int clk_set_rate_range_nolock(str
 	 * - the determine_rate() callback does not really check for
 	 *   this corner case when determining the rate
 	 */
-	rate = clamp(clk->core->req_rate, min, max);
+	rate = clamp(rate, min, max);
 	ret = clk_core_set_rate_nolock(clk->core, rate);
 	if (ret) {
 		/* rollback the changes */
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -362,9 +362,37 @@ static void clk_test_uncached_set_range(
 	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
 }
 
+/*
+ * Test that for an uncached clock, clk_set_rate_range() will work
+ * properly if the rate has changed in hardware.
+ *
+ * In this case, it means that if the rate wasn't initially in the range
+ * we're trying to set, but got changed at some point into the range
+ * without the kernel knowing about it, its rate shouldn't be affected.
+ */
+static void clk_test_uncached_updated_rate_set_range(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	ctx->rate = DUMMY_CLOCK_RATE_1 + 1000;
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(clk,
+					   DUMMY_CLOCK_RATE_1,
+					   DUMMY_CLOCK_RATE_2),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+}
+
 static struct kunit_case clk_uncached_test_cases[] = {
 	KUNIT_CASE(clk_test_uncached_get_rate),
 	KUNIT_CASE(clk_test_uncached_set_range),
+	KUNIT_CASE(clk_test_uncached_updated_rate_set_range),
 	{}
 };