openwrt/target/linux/bcm27xx/patches-6.6/950-1062-drm-vc4-dsi-Clocks-should-be-running-before-reset.patch

From 7f7a5d80c4eb0207713ef938737f56fdebcd1cb3 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 8 Jun 2022 17:23:47 +0100
Subject: [PATCH 1062/1085] drm: vc4: dsi: Clocks should be running before
 reset

The initialisation sequence differs slightly from the documentation
in that the clocks are meant to be running before resets and
similar.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -926,6 +926,20 @@ static void vc4_dsi_bridge_pre_enable(st
 			"Failed to set phy clock to %ld: %d\n", phy_clock, ret);
 	}
 
+	ret = clk_prepare_enable(dsi->escape_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on DSI escape clock: %d\n", ret);
+		return;
+	}
+
+	ret = clk_prepare_enable(dsi->pll_phy_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on DSI PLL: %d\n", ret);
+		return;
+	}
+
+	hs_clock = clk_get_rate(dsi->pll_phy_clock);
+
 	/* Reset the DSI and all its fifos. */
 	DSI_PORT_WRITE(CTRL,
 		       DSI_CTRL_SOFT_RESET_CFG |
@@ -984,20 +998,6 @@ static void vc4_dsi_bridge_pre_enable(st
 		mdelay(1);
 	}
 
-	ret = clk_prepare_enable(dsi->escape_clock);
-	if (ret) {
-		DRM_ERROR("Failed to turn on DSI escape clock: %d\n", ret);
-		return;
-	}
-
-	ret = clk_prepare_enable(dsi->pll_phy_clock);
-	if (ret) {
-		DRM_ERROR("Failed to turn on DSI PLL: %d\n", ret);
-		return;
-	}
-
-	hs_clock = clk_get_rate(dsi->pll_phy_clock);
-
 	/* Yes, we set the DSI0P/DSI1P pixel clock to the byte rate,
 	 * not the pixel clock rate.  DSIxP take from the APHY's byte,
 	 * DDR2, or DDR4 clock (we use byte) and feed into the PV at