openwrt/target/linux/bcm27xx/patches-5.4/950-0929-overlays-Delete-spi0-hw-cs.patch

88 lines
2.3 KiB
Diff
Raw Normal View History

From 9fcbc40311f8de3f7a0a27155f310ff19e150d76 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Thu, 30 Jul 2020 18:06:24 +0100
Subject: [PATCH] overlays: Delete spi0-hw-cs
The spi0-hw-cs overlay is unnecessary (and actually harmful) with the
current kernels. Delete it, leaving a note in the README and a
deprecation message from the firmware:
dterror: overlay 'spi0-hw-cs' is deprecated: no longer necessary
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/overlays/Makefile | 1 -
arch/arm/boot/dts/overlays/README | 6 ++---
arch/arm/boot/dts/overlays/overlay_map.dts | 4 +++
.../boot/dts/overlays/spi0-hw-cs-overlay.dts | 26 -------------------
4 files changed, 7 insertions(+), 30 deletions(-)
delete mode 100644 arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -159,7 +159,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
spi-gpio40-45.dtbo \
spi-rtc.dtbo \
spi0-cs.dtbo \
- spi0-hw-cs.dtbo \
spi1-1cs.dtbo \
spi1-2cs.dtbo \
spi1-3cs.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -2346,9 +2346,9 @@ Params: cs0_pin GPIO pin
Name: spi0-hw-cs
-Info: Re-enables hardware CS/CE (chip selects) for SPI0
-Load: dtoverlay=spi0-hw-cs
-Params: <None>
+Info: This overlay has been deprecated and removed because it is no longer
+ necessary and has been seen to prevent spi0 from working.
+Load: <Deprecated>
Name: spi1-1cs
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
@@ -61,6 +61,10 @@
deprecated = "use sdio,bus_width=1,gpios_22_25";
};
+ spi0-hw-cs {
+ deprecated = "no longer necessary";
+ };
+
spi3-1cs {
bcm2711;
};
--- a/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device tree overlay to re-enable hardware CS for SPI0
- */
-
-/dts-v1/;
-/plugin/;
-
-/ {
- compatible = "brcm,bcm2835";
-
- fragment@0 {
- target = <&spi0>;
- __overlay__ {
- cs-gpios = <0>, <0>;
- status = "okay";
- };
- };
-
- fragment@1 {
- target = <&spi0_cs_pins>;
- __overlay__ {
- brcm,pins = <8 7>;
- brcm,function = <4>; /* alt0 */
- };
- };
-};