openwrt/target/linux/bcm27xx/patches-5.15/950-0150-clk-bcm2835-Allow-reparenting-leaf-clocks-while-they.patch

From d80ceb5175ec4b5d18bcdd571ef2d51c3d24b749 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Thu, 2 May 2019 15:24:04 -0700
Subject: [PATCH] clk: bcm2835: Allow reparenting leaf clocks while
 they're running.

This falls under the same "we can reprogram glitch-free as long as we
pause generation" rule as updating the div/frac fields.  This can be
used for runtime reclocking of V3D to manage power leakage.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/clk/bcm/clk-bcm2835.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1128,8 +1128,10 @@ static int bcm2835_clock_on(struct clk_h
 	return 0;
 }
 
-static int bcm2835_clock_set_rate(struct clk_hw *hw,
-				  unsigned long rate, unsigned long parent_rate)
+static int bcm2835_clock_set_rate_and_parent(struct clk_hw *hw,
+					     unsigned long rate,
+					     unsigned long parent_rate,
+					     u8 parent)
 {
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	struct bcm2835_cprman *cprman = clock->cprman;
@@ -1151,6 +1153,11 @@ static int bcm2835_clock_set_rate(struct
 		bcm2835_clock_wait_busy(clock);
 	}
 
+	if (parent != 0xff) {
+		ctl &= ~(CM_SRC_MASK << CM_SRC_SHIFT);
+		ctl |= parent << CM_SRC_SHIFT;
+	}
+
 	ctl &= ~CM_FRAC;
 	ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
 	cprman_write(cprman, data->ctl_reg, ctl);
@@ -1162,6 +1169,12 @@ static int bcm2835_clock_set_rate(struct
 	return 0;
 }
 
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+				  unsigned long rate, unsigned long parent_rate)
+{
+	return bcm2835_clock_set_rate_and_parent(hw, rate, parent_rate, 0xff);
+}
+
 static bool
 bcm2835_clk_is_pllc(struct clk_hw *hw)
 {
@@ -1345,6 +1358,7 @@ static const struct clk_ops bcm2835_cloc
 	.unprepare = bcm2835_clock_off,
 	.recalc_rate = bcm2835_clock_get_rate,
 	.set_rate = bcm2835_clock_set_rate,
+	.set_rate_and_parent = bcm2835_clock_set_rate_and_parent,
 	.determine_rate = bcm2835_clock_determine_rate,
 	.set_parent = bcm2835_clock_set_parent,
 	.get_parent = bcm2835_clock_get_parent,
@@ -1527,7 +1541,6 @@ static struct clk_hw *bcm2835_register_c
 		init.ops = &bcm2835_vpu_clock_clk_ops;
 	} else {
 		init.ops = &bcm2835_clock_clk_ops;
-		init.flags |= CLK_SET_PARENT_GATE;
 
 		/* If the clock wasn't actually enabled at boot, it's not
 		 * critical.