openwrt/target/linux/ath79/patches-6.6/910-mikrotik-rb4xx.patch

122 lines
4.3 KiB
Diff
Raw Normal View History

From: Christopher Hill <ch6574@gmail.com>
Subject: [PATCH] ath79: add Mikrotik rb4xx series drivers
This adds 3 Mikrotik rb4xx series drivers as follows:
rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device
that interfaces between the SoC SPI bus and its two children below.
rb4xx-gpio: This is the GPIO expander.
rb4xx-nand: This is the NAND driver.
The history of this code comes in three phases.
1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx
drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/.
Module-author: Gabor Juhos <juhosg@openwrt.org>
Module-author: Imre Kaloz <kaloz@openwrt.org>
Module-author: Bert Vermeulen <bert@biot.com>
2. Next several ar71xx patches were applied bringing the code current.
commit 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c
Submitted-by: Hauke Mehrtens <hauke@hauke-m.de>
commit af79fdbe4af32a287798b579141204bda056b8aa
commit 889272d92db689fd9c910243635e44c9d8323095
commit e21cb649a235180563363b8af5ba8296b9ac0baa
commit 7c09fa4a7492ca436f2c94bd9a465b7c5bbeed6f
Submitted-by: Felix Fietkau <nbd@nbd.name>
3. Finally a heavy refactor to split the driver into the three new
subsystems, and updated to work with the device tree configuration, plus
updates and review feedback incorporated
Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org>
Submitted-by: Christopher Hill <ch6574@gmail.com>
---
drivers/mfd/Kconfig | 8 ++++++++
drivers/mfd/Makefile | 1 +
drivers/gpio/Kconfig | 6 ++++++
drivers/gpio/Makefile | 1 +
drivers/mtd/nand/raw/Kconfig | 7 +++++++
drivers/mtd/nand/raw/Makefile | 1 +
6 files changed, 24 insertions(+)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2261,6 +2261,14 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config MFD_RB4XX_CPLD
+ tristate "CPLD driver for Mikrotik RB4xx series boards"
+ select MFD_CORE
+ depends on ATH79 || COMPILE_TEST
+ help
+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
+ Routerboard RB4xx series.
+
config SGI_MFD_IOC3
bool "SGI IOC3 core driver"
depends on PCI && MIPS && 64BIT
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -269,6 +269,7 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-
obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_SMPRO) += smpro-core.o
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1696,6 +1696,12 @@ config GPIO_SODAVILLE
help
Say Y here to support Intel Sodaville GPIO.
+config GPIO_RB4XX
+ tristate "GPIO expander for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ GPIO driver for Mikrotik Routerboard RB4xx series.
+
endmenu
menu "SPI GPIO expanders"
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -131,6 +131,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
kernel: bump 6.6 to 6.6.44 Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.44 Removed upstreamed: rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch[1] rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch[2] rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch[3] rockchip/patches-6.6/048-v6.11-arm64-dts-rockchip-Update-WIFi-BT-related-nodes-on-r.patch[4] rockchip/patches-6.6/310-PCI-dw-rockchip-Fix-initial-PERST-GPIO-value.patch[5] Manually rebased: bcm27xx/patches-6.6/950-0526-mfd-Add-rp1-driver.patch ramips/patches-6.6/810-uvc-add-iPassion-iP2970-support.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.44&id=96155dc8c99e76a0e58932ca5f88148a37af3617 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.44&id=30ee9e5ecc5fd6854a1690ab11e6e6b4851ac9ab 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.44&id=0c4c1b7daf23bccf0da5b65b3cd5b32bfa5a5af4 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.44&id=a86a5685675834732789df202e73153db59d8dcc 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.44&id=a30211c6704899de0616ac0f97601122d899c86d Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <therealgraysky@proton.me> Link: https://github.com/openwrt/openwrt/pull/16061 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-08-03 15:44:35 +00:00
@@ -550,4 +550,11 @@ config MTD_NAND_AR934X
Enables support for NAND controller on Qualcomm Atheros SoCs.
This controller is found on AR934x and QCA955x SoCs.
+config MTD_NAND_RB4XX
+ tristate "Support for NAND driver for Mikrotik RB4xx series boards"
+ depends on MFD_RB4XX_CPLD
+ help
+ Enables support for the NAND flash chip on Mikrotik Routerboard
+ RB4xx series.
+
endif # MTD_RAW_NAND
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock
obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o
obj-$(CONFIG_MTD_NAND_RENESAS) += renesas-nand-controller.o
obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_onfi.o