openwrt/target/linux/brcm2708/patches-4.14/950-0366-devicetree-add-RPi-CM3-dts-to-arm64-mimic-the-RPi-3B.patch

From 1767590e5da1817e0f9ea0521af9096acb2590c6 Mon Sep 17 00:00:00 2001
From: Steve Pavao <stevep@korgrd.com>
Date: Fri, 10 Aug 2018 17:09:50 -0400
Subject: [PATCH 366/454] devicetree: add RPi CM3 dts to arm64; mimic the RPi
 3B arm64 dts implementation, by referring to the actual dts file in the arm
 directory

---
 arch/arm64/boot/dts/broadcom/Makefile            | 2 ++
 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 +++
 2 files changed, 5 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts

--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
 dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb
+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb
 
 dts-dirs += ../overlays
 
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts
@@ -0,0 +1,3 @@
+#define RPI364
+
+#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts"
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> 2018-11-10 11:03:18 +00:00			`From 1767590e5da1817e0f9ea0521af9096acb2590c6 Mon Sep 17 00:00:00 2001`
			`From: Steve Pavao <stevep@korgrd.com>`
			`Date: Fri, 10 Aug 2018 17:09:50 -0400`
			`Subject: [PATCH 366/454] devicetree: add RPi CM3 dts to arm64; mimic the RPi`
			`3B arm64 dts implementation, by referring to the actual dts file in the arm`
			`directory`

			`---`
			`arch/arm64/boot/dts/broadcom/Makefile \| 2 ++`
			`arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts \| 3 +++`
			`2 files changed, 5 insertions(+)`
			`create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts`

			`--- a/arch/arm64/boot/dts/broadcom/Makefile`
			`+++ b/arch/arm64/boot/dts/broadcom/Makefile`
			`@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp`
			`dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb`
			`dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb`
			`dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb`
			`+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb`
			`+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb`

			`dts-dirs += ../overlays`

			`--- /dev/null`
			`+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts`
			`@@ -0,0 +1,3 @@`
			`+#define RPI364`
			`+`
			`+#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts"`