openwrt/target/linux/brcm2708/patches-4.14/950-0001-arm-partially-revert-702b94bff3c50542a6e4ab9a4f4cef0.patch

100 lines
3.4 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From a45a0eb188581a6c1f57b7adc4f66f5754927ad3 Mon Sep 17 00:00:00 2001
From: Dan Pasanen <dan.pasanen@gmail.com>
Date: Thu, 21 Sep 2017 09:55:42 -0500
Subject: [PATCH 001/454] arm: partially revert
702b94bff3c50542a6e4ab9a4f4cef093262fe65
* Re-expose some dmi APIs for use in VCSM
---
arch/arm/include/asm/cacheflush.h | 21 +++++++++++++++++++++
arch/arm/include/asm/glue-cache.h | 2 ++
arch/arm/mm/proc-macros.S | 2 ++
arch/arm/mm/proc-syms.c | 3 +++
4 files changed, 28 insertions(+)
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,21 @@
* DMA Cache Coherency
* ===================
*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * dma_clean_range(start, end)
+ *
+ * Clean (write back) the specified virtual address range.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
@@ -115,6 +130,8 @@ struct cpu_cache_fns {
void (*dma_map_area)(const void *, size_t, int);
void (*dma_unmap_area)(const void *, size_t, int);
+ void (*dma_inv_range)(const void *, const void *);
+ void (*dma_clean_range)(const void *, const void *);
void (*dma_flush_range)(const void *, const void *);
} __no_randomize_layout;
@@ -140,6 +157,8 @@ extern struct cpu_cache_fns cpu_cache;
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
+#define dmac_inv_range cpu_cache.dma_inv_range
+#define dmac_clean_range cpu_cache.dma_clean_range
#define dmac_flush_range cpu_cache.dma_flush_range
#else
@@ -159,6 +178,8 @@ extern void __cpuc_flush_dcache_area(voi
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
extern void dmac_flush_range(const void *, const void *);
#endif
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -154,6 +154,8 @@ static inline void nop_dma_unmap_area(co
#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+#define dmac_inv_range __glue(_CACHE,_dma_inv_range)
+#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
#endif
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -335,6 +335,8 @@ ENTRY(\name\()_cache_fns)
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
.long \name\()_flush_kern_dcache_area
.long \name\()_dma_map_area
.long \name\()_dma_unmap_area
+ .long \name\()_dma_inv_range
+ .long \name\()_dma_clean_range
.long \name\()_dma_flush_range
.size \name\()_cache_fns, . - \name\()_cache_fns
.endm
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -30,6 +30,9 @@ EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
EXPORT_SYMBOL(__cpuc_flush_dcache_area);
+EXPORT_SYMBOL(dmac_inv_range);
+EXPORT_SYMBOL(dmac_clean_range);
+EXPORT_SYMBOL(dmac_flush_range);
#else
EXPORT_SYMBOL(cpu_cache);
#endif