ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 17:01:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
869bbdb8f6
openwrt/target/linux/ixp4xx/image/Makefile

129 lines
4.0 KiB
Makefile
Raw Normal View History

ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2006-2021 OpenWrt.org
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
# Cook a Linksys NSLU2 etc image
define Build/linksys-ixp425-image
touch $@.null-initrd
$(TOPDIR)/scripts/slugimage.pl -L $(STAGING_DIR_IMAGE)/apex/apex-$(1)-armeb.bin -k $@ -r $@.null-initrd -p -o $@.new
mv $@.new $@
endef
ixp4xx: Add back support for Freecom FSG-3 OpenWrt supported the Freecom FSG-3 in the past. It has 64 MB of RAM so will run fine, but the bare 4 MB of flash makes it a non-default target. The generated compressed image is currently below 4MB (just 3.3 MB) though, so it should be possible to flash just fine with a rootfs on a harddrive or USB stick, which is what the FSG-3 used in the past as well. The device has a WAN port on eth0 and three LAN ports on eth1. The LAN ports are probably a DSA switch but the old OpenWrt base never activated that, instead it relies on boot defaults. Due to questionable usablity without tweaking and further work this image is not built by default, but made available for developers who know what they are doing. The TAR+CRC image generation is a rewritten version of the earlier support code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-20 20:05:13 +00:00
define Build/freecom-image
mkdir -p $@.tmptar
# Add kernel
cp $@ $@.tmptar/zImage
cd $@.tmptar && tar -c -j -f $@.new --numeric-owner --owner=0 --group=0 *
rm -rf $@.tmptar
encode_crc $@.new $@
rm -f $@.new
endef
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
# Build sysupgrade image
define BuildFirmware/Generic
dd if=$(KDIR)/zImage of=$(KDIR)/zImage.pad bs=64k conv=sync; \
dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.$(1).pad bs=128k conv=sync; \
sh $(TOPDIR)/scripts/combined-image.sh \
$(KDIR)/zImage.pad \
$(KDIR)/root.$(1).pad \
$(BIN_DIR)/$(IMG_PREFIX)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))-sysupgrade.bin
endef
define Image/Build
$(call Image/Build/$(1),$(1))
$(call BuildFirmware/Generic,$(1))
endef
define Device/Default
PROFILES := Default
ixp4xx: Bump to kernel v6.6 The IXP4xx is well supported upstream and can readily be supported with kernel v6.6. To simplify things after the DTS directory was renamed, switch to v6.6 only. Bring in some outstanding patches. Tested on the Gateworks GW2348-4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-15 21:16:54 +00:00
DEVICE_DTS_DIR = $$(DTS_DIR)/intel/ixp
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb
BLOCKSIZE := 128k
endef
ixp4xx: Add back support for Freecom FSG-3 OpenWrt supported the Freecom FSG-3 in the past. It has 64 MB of RAM so will run fine, but the bare 4 MB of flash makes it a non-default target. The generated compressed image is currently below 4MB (just 3.3 MB) though, so it should be possible to flash just fine with a rootfs on a harddrive or USB stick, which is what the FSG-3 used in the past as well. The device has a WAN port on eth0 and three LAN ports on eth1. The LAN ports are probably a DSA switch but the old OpenWrt base never activated that, instead it relies on boot defaults. Due to questionable usablity without tweaking and further work this image is not built by default, but made available for developers who know what they are doing. The TAR+CRC image generation is a rewritten version of the earlier support code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-20 20:05:13 +00:00
define Device/freecom_fsg_3
DEVICE_VENDOR := Freecom
DEVICE_MODEL := FSG-3
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-isl1208 kmod-ath5k wpad-basic-mbedtls
# Only 4 MB of Flash so not building by default
DEFAULT := n
DEVICE_DTS := intel-ixp42x-freecom-fsg-3
KERNEL := kernel-bin | append-dtb
IMAGES := factory.bin
# This has to boot from harddisk so just append the kernel
IMAGE/factory.bin := append-kernel | freecom-image
endef
TARGET_DEVICES += freecom_fsg_3
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
define Device/gateworks_avila
DEVICE_VENDOR := Gateworks
DEVICE_MODEL := Avila GW2348-4
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-ds1672 kmod-eeprom-at24 kmod-hwmon-ad7418
DEVICE_DTS := intel-ixp42x-gateworks-gw2348
KERNEL := kernel-bin | append-dtb
IMAGES := kernel.bin rootfs.bin
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k
endef
TARGET_DEVICES += gateworks_avila
define Device/gateworks_cambria
DEVICE_VENDOR := Gateworks
DEVICE_MODEL := Cambria GW2358-4
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-ds1672 kmod-eeprom-at24 kmod-hwmon-ad7418
DEVICE_DTS := intel-ixp43x-gateworks-gw2358
KERNEL := kernel-bin | append-dtb
IMAGES := kernel.bin rootfs.bin
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k
endef
TARGET_DEVICES += gateworks_cambria
ixp4xx: Add back support for Iomega NAS100D OpenWrt supported the Iomega NAS100D in the past and it has 64 MB of RAM so if booted from a harddrive it will probably work just fine. The APEX boot loader already has a build variant for this machine that we can just pick up and use. This device has a single ethernet port so bring this online with DHCP as expected for a NAS device. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-20 19:32:55 +00:00
define Device/iomega_nas100d
DEVICE_VENDOR := Iomega
DEVICE_MODEL := NAS100d
# USB2 is compiled in and needs no package
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-pcf8563
DEVICE_DTS := intel-ixp42x-iomega-nas100d
KERNEL := kernel-bin | append-dtb
IMAGES := factory.bin
# This has to boot from harddisk so just append the kernel
IMAGE/factory.bin := append-kernel | linksys-ixp425-image "nas100d"
endef
TARGET_DEVICES += iomega_nas100d
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
define Device/linksys_nslu2
DEVICE_VENDOR := Linksys
DEVICE_MODEL := NSLU2
# USB2 is compiled in and needs no package
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-x1205
# Only 32 MB of RAM so not building by default
DEFAULT := n
DEVICE_DTS := intel-ixp42x-linksys-nslu2
KERNEL := kernel-bin | append-dtb
IMAGES := factory.bin
# This has to boot from harddisk so just append the kernel
IMAGE/factory.bin := append-kernel | linksys-ixp425-image "nslu2"
endef
TARGET_DEVICES += linksys_nslu2
ixp4xx: Add USRobotics USR8200 support This brings back USRobotics USR8200 support to the IXP4xx target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-23 06:43:09 +00:00
define Device/usrobotics_usr8200
DEVICE_VENDOR := USRobotics
DEVICE_MODEL := USR8200
# USB2 is compiled in and needs no package
DEVICE_PACKAGES := ixp4xx-microcode-ethernet kmod-rtc-r7301 kmod-firewire kmod-firewire-ohci
DEVICE_DTS := intel-ixp42x-usrobotics-usr8200
KERNEL := kernel-bin | append-dtb
IMAGES := kernel.bin rootfs.bin
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-rootfs | pad-rootfs | pad-to 128k
endef
TARGET_DEVICES += usrobotics_usr8200
ixp4xx: Resurrect IXP4xx support using device tree This resurrects the support for IXP4xx using device tree rather than the old (deleted) board files. The final pieces of IXP4xx board files were deleted in Linux v5.19. Ext4 root filesystems on CF and USB are supported by the default config. We support these three initial targets: - The Gateworks Avila GW2348 reference design has 64MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The Gateworks Cambria GW2358 reference design has 128MB of RAM and 32MB of flash and also supports USB and CompactFlash. - The old and stable Linksys NSLU2 works fine as well, albeit it only has 32MB of RAM so it has been marked as non-default. The 8MB of flash can only fit the kernel, so it has been patched to boot from exteral media on USB. I have used it successfully as a NAS with ksmbd and LUCI web API, see: https://dflund.se/~triad/krad/ixp4xx/ Signed-off-by: Howard Harte <hharte@magicandroidapps.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-10-23 06:43:07 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink