openwrt/target/linux/bcm27xx/patches-5.10/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch

43 lines
1.6 KiB
Diff
Raw Normal View History

From 9f7c0728efb0036f6f197126aa62da40cdf4713a Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 28 Apr 2021 16:14:21 +0100
Subject: [PATCH] drm/vc4: Allow DBLCLK modes even if horz timing is
odd.
The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.
Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.
Amend the filtering appropriately.
See https://github.com/raspberrypi/linux/issues/4307
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1066,6 +1066,7 @@ static int vc4_hdmi_encoder_atomic_check
unsigned long long tmds_rate;
if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+ !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
(mode->hsync_end % 2) || (mode->htotal % 2)))
return -EINVAL;
@@ -1110,6 +1111,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_e
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+ !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
(mode->hsync_end % 2) || (mode->htotal % 2)))
return MODE_H_ILLEGAL;