openwrt/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts

#include "mt7620a_phicomm_psg1218.dtsi"

/ {
	compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
	model = "Phicomm PSG1218 rev.B";
};

&state_default {
	gpio {
		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
		function = "gpio";
	};
};

&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;

	mtd-mac-address = <&factory 0x28>;
};
ramips/mt7620: Name DTS files based on scheme As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2019-07-03 23:22:25 +02:00			`#include "mt7620a_phicomm_psg1218.dtsi"`
treewide: dts: use keycode defines from input dt-binding All compiled device tree files not mentioned are binary identical to the former ones. Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts. Due to the include of the input binding header, the BTN_* node names in: - ramips/GL-MT300A.dts - ramips/GL-MT300N.dts - ramips/GL-MT750.dts - ramips/Timecloud.dts will be changed by the compiler to the numerical equivalent. Move the binding include of lantiq boards to the file where they are used the first time to hint the user where the values do come from. Signed-off-by: Mathias Kresin <dev@kresin.me> 2016-11-11 22:43:08 +01:00
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com> 2016-09-30 19:41:12 +08:00			`/ {`
ramips: update device tree source files Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-07-29 10:14:07 +08:00			`compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";`
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2017-04-21 02:47:44 +02:00			`model = "Phicomm PSG1218 rev.B";`
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com> 2016-09-30 19:41:12 +08:00			`};`

ramips: simplify state_default/pinctrl0 in device DTS files The node pinctrl0 is already set up in the SOC DTSI files, but defined again as member of pinctrl in most of the device DTS(I) files. This patch removes this redundancy for the entire ramips target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2019-12-22 21:26:01 +01:00			`&state_default {`
			`gpio {`
ramips: replace pinctrl property names Upstream pinctrl driver in drivers/staging uses groups/function/ralink,num-gpios instead of ralink,group/ralink,function/ralink,nr-gpio Replace these properties in dts as well as the pinctrl driver in patches-4.14. This commit is created using: sed -i 's/ralink,group/groups/g' sed -i 's/ralink,function/function/g' sed -i 's/ralink,nr-gpio/ralink,num-gpios/g' Signed-off-by: Chuanhong Guo <gch981213@gmail.com> 2020-04-12 20:58:29 +08:00			`groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";`
			`function = "gpio";`
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com> 2016-09-30 19:41:12 +08:00			`};`
			`};`

			`&ethernet {`
			`pinctrl-names = "default";`
			`pinctrl-0 = <&ephy_pins>;`
ramips: mt7620: tidy up ethernet node in DTS files This tidies up the ethernet node in mt7620 DTS files by: - removing unnecessary status as it is not disabled - reordering properties consistently - adding empty lines to enhance readability This should make comparison and reviewing new PRs based on C/P easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-05-14 15:41:31 +02:00
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com> 2016-09-30 19:41:12 +08:00			`mtd-mac-address = <&factory 0x28>;`
			`};`