openwrt/target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts

187 lines
3.1 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "siemens,ws-ap3610", "qca,ar7161";
model = "Siemens WS-AP3610";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_red;
label-mac-device = &eth0;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
led_power_green: led_power_green {
label = "ws-ap3610:green:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
led_power_red: led_power_red {
label = "ws-ap3610:red:power";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_wlan5_blue {
label = "ws-ap3610:blue:wlan5";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_wlan5_green {
label = "ws-ap3610:green:wlan5";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
led_wlan2_blue {
label = "ws-ap3610:blue:wlan2";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led_wlan2_green {
label = "ws-ap3610:green:wlan2";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
/*
* When the compatible-is missing, PHY autodetection
* is performed, but the PHY-ID reads all 0xff.
*
* Linux does not create the device in this case,
* and the reset is never even de-asserted.
*/
compatible = "ethernet-phy-id0143.bca2",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
resets = <&rst 8>;
reset-names = "phy";
reset-assert-us = <10000>;
reset-deassert-us = <10000>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-bak";
reg = <0x40000 0x40000>;
read-only;
};
partition@80000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x80000 0xe00000>;
};
partition@e80000 {
label = "cfg1";
reg = <0xe80000 0x40000>;
read-only;
};
partition@ec0000 {
label = "cfg2";
reg = <0xec0000 0x40000>;
read-only;
};
partition@f00000 {
label = "nvram1";
reg = <0xf00000 0x40000>;
read-only;
};
partition@f40000 {
label = "nvram2";
reg = <0xf40000 0x40000>;
read-only;
};
partition@f80000 {
label = "rsvd1";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "rsvd2";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};