openwrt/target/linux/bcm27xx/patches-5.4/950-0957-overlays-Add-spi0-1cs-and-spi0-2cs.patch

From 692af7a59fd6d9d3b64edbf028cd75b0096ef8c7 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 28 Aug 2020 12:55:41 +0100
Subject: [PATCH] overlays: Add spi0-1cs and spi0-2cs

The spi0-1cs overlay allows the SPI0 interface to be run with a single
CS line, which can be useful if GPIOs are in short supply. The no_miso
parameter is for write-only devices that don't need the return channel,
and again is there to free up a GPIO.

spi0-2cs is the new name for spi0-cs (now deprecated with a redirect
to spi0-2cs), but with the addedd no_miso parameter.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  3 +-
 arch/arm/boot/dts/overlays/README             | 22 ++++++++--
 arch/arm/boot/dts/overlays/overlay_map.dts    |  4 ++
 .../boot/dts/overlays/spi0-1cs-overlay.dts    | 42 +++++++++++++++++++
 ...i0-cs-overlay.dts => spi0-2cs-overlay.dts} |  8 ++++
 5 files changed, 75 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/overlays/spi0-1cs-overlay.dts
 rename arch/arm/boot/dts/overlays/{spi0-cs-overlay.dts => spi0-2cs-overlay.dts} (79%)

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -161,7 +161,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi-gpio35-39.dtbo \
 	spi-gpio40-45.dtbo \
 	spi-rtc.dtbo \
-	spi0-cs.dtbo \
+	spi0-1cs.dtbo \
+	spi0-2cs.dtbo \
 	spi1-1cs.dtbo \
 	spi1-2cs.dtbo \
 	spi1-3cs.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -2412,11 +2412,27 @@ Load:   dtoverlay=spi-rtc,<param>=<val>
 Params: pcf2123                 Select the PCF2123 device
 
 
-Name:   spi0-cs
-Info:   Allows the (software) CS pins for SPI0 to be changed
-Load:   dtoverlay=spi0-cs,<param>=<val>
+Name:   spi0-1cs
+Info:   Only use one CS pin for SPI0
+Load:   dtoverlay=spi0-1cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 8)
+        no_miso                 Don't claim and use the MISO pin (9), freeing
+                                it for other uses.
+
+
+Name:   spi0-2cs
+Info:   Change the CS pins for SPI0
+Load:   dtoverlay=spi0-2cs,<param>=<val>
 Params: cs0_pin                 GPIO pin for CS0 (default 8)
         cs1_pin                 GPIO pin for CS1 (default 7)
+        no_miso                 Don't claim and use the MISO pin (9), freeing
+                                it for other uses.
+
+
+Name:   spi0-cs
+Info:   This overlay has been renamed spi0-1cs, keeping spi0-cs as an
+        alias for backwards compatibility.
+Load:   <Deprecated>
 
 
 Name:   spi0-hw-cs
--- a/arch/arm/boot/dts/overlays/overlay_map.dts
+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
@@ -61,6 +61,10 @@
 		deprecated = "use sdio,bus_width=1,gpios_22_25";
 	};
 
+	spi0-cs {
+		renamed = "spi0-2cs";
+	};
+
 	spi0-hw-cs {
 		deprecated = "no longer necessary";
 	};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi0-1cs-overlay.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <8>;
+		};
+	};
+
+	fragment@1 {
+		target = <&spi0>;
+		frag1: __overlay__ {
+			cs-gpios = <&gpio 8 1>;
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target = <&spi0_pins>;
+		__dormant__ {
+			brcm,pins = <10 11>;
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		no_miso = <0>,"=3";
+	};
+};
--- a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/dts-v1/;
-/plugin/;
-
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	fragment@0 {
-		target = <&spi0_cs_pins>;
-		frag0: __overlay__ {
-			brcm,pins = <8 7>;
-		};
-	};
-
-	fragment@1 {
-		target = <&spi0>;
-		frag1: __overlay__ {
-			cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
-			status = "okay";
-		};
-	};
-
-	__overrides__ {
-		cs0_pin  = <&frag0>,"brcm,pins:0",
-			   <&frag1>,"cs-gpios:4";
-		cs1_pin  = <&frag0>,"brcm,pins:4",
-			   <&frag1>,"cs-gpios:16";
-	};
-};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi0-2cs-overlay.dts
@@ -0,0 +1,37 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <8 7>;
+		};
+	};
+
+	fragment@1 {
+		target = <&spi0>;
+		frag1: __overlay__ {
+			cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&spi0_pins>;
+		__dormant__ {
+			brcm,pins = <10 11>;
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		no_miso = <0>,"=2";
+	};
+};