openwrt/target/linux/d1/Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2024 Toco Technologies <info@toco.ae>
#
include $(TOPDIR)/rules.mk

ARCH:=riscv64
BOARD:=d1
BOARDNAME:=AllWinner D1 RISC-V SoC
FEATURES:=ext4 squashfs
KERNELNAME:=Image dtbs
SUBTARGETS:=generic

KERNEL_PATCHVER:=6.1

include $(INCLUDE_DIR)/target.mk

define Target/Description
	Build firmware images for Allwinner D1 RISC-V boards
endef

$(eval $(call BuildTarget))
d1: add new target This target adds support for the Allwinner D1 RISC-V based SoCs. - RISC-V single-core T-Head C906 (RV64GCV) - Tensilica HiFi4 DSP - DDR2/DDR3 support - 10/100/1000M ethernet - usual peripherals like USB2, SPI, I2C, PWM, etc. Four boards are supported: - Dongshan Nezha STU - 512Mb RAM - ethernet - LicheePi RV Dock - 512Mb RAM - wireless-only (RTL8723DS) - MangoPi MQ-Pro - 512Mb RAM - there are pads available for an SPI flash - wireless-only (RTL8723DS) - Nezha D1 - 512Mb/1Gb/2Gb RAM - 256Mb NAND flash - ethernet, wireless Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> 2023-05-24 23:51:14 +02:00			`# SPDX-License-Identifier: GPL-2.0-only`
			`#`
			`# Copyright (C) 2024 Toco Technologies <info@toco.ae>`
			`#`
			`include $(TOPDIR)/rules.mk`

			`ARCH:=riscv64`
			`BOARD:=d1`
			`BOARDNAME:=AllWinner D1 RISC-V SoC`
			`FEATURES:=ext4 squashfs`
			`KERNELNAME:=Image dtbs`
d1: define subtarget specifically Historically it's possible to leave the `SUBTARGETS` undefined and automatically fallback to a "generic" subtarget. This however breaks various downstream scripts which may have expectations around filenames: While some targets with an explicit generic subtarget contain `generic` in the filenames of artifacts, implicit "subtargets" don't. Right now this breaks the CI[1], possibly also scripts using the ImageBuilders. Do to the D1 target what's done to other target, explicitly define the "generic" subtarget. [1]: https://github.com/openwrt/openwrt/actions/runs/8592821105/job/23548273630 Signed-off-by: Paul Spooren <mail@aparcar.org> 2024-04-08 07:54:45 +02:00			`SUBTARGETS:=generic`
d1: add new target This target adds support for the Allwinner D1 RISC-V based SoCs. - RISC-V single-core T-Head C906 (RV64GCV) - Tensilica HiFi4 DSP - DDR2/DDR3 support - 10/100/1000M ethernet - usual peripherals like USB2, SPI, I2C, PWM, etc. Four boards are supported: - Dongshan Nezha STU - 512Mb RAM - ethernet - LicheePi RV Dock - 512Mb RAM - wireless-only (RTL8723DS) - MangoPi MQ-Pro - 512Mb RAM - there are pads available for an SPI flash - wireless-only (RTL8723DS) - Nezha D1 - 512Mb/1Gb/2Gb RAM - 256Mb NAND flash - ethernet, wireless Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> 2023-05-24 23:51:14 +02:00
			`KERNEL_PATCHVER:=6.1`

			`include $(INCLUDE_DIR)/target.mk`

			`define Target/Description`
			`Build firmware images for Allwinner D1 RISC-V boards`
			`endef`

			`$(eval $(call BuildTarget))`