openwrt/target/linux/lantiq/base-files/lib/upgrade/platform.sh

PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1

platform_check_image() {
	return 0
}

platform_pre_upgrade() {
	local board=$(board_name)

	case "$board" in
	BTHOMEHUBV2B|BTHOMEHUBV3A|BTHOMEHUBV5A|P2812HNUF* )
		nand_do_upgrade $1
		;;
	esac
}

# use default for platform_do_upgrade()

disable_watchdog() {
	killall watchdog
	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
		echo 'Could not disable watchdog'
		return 1
	}
}
append sysupgrade_pre_upgrade disable_watchdog
lantiq: add v3.10 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031 2013-09-17 21:46:10 +00:00			`PART_NAME=firmware`
lantiq: append metadata to images Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-11-17 10:41:08 +00:00			`REQUIRE_IMAGE_METADATA=1`
adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. SVN-Revision: 24526 2010-12-12 22:57:16 +00:00
			`platform_check_image() {`
lantiq: remove device specific sysupgrade image checks Replaced by image metadata Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-11-20 19:07:18 +00:00			`return 0`
adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. SVN-Revision: 24526 2010-12-12 22:57:16 +00:00			`}`

lantiq: add platform_pre_upgrade for sysupgrade As explained in recent sysupgrade/nand.sh commits, current NAND sysupgrade is a bit misleading because of nand_do_platform_check behavior. It leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. Please note that because of current nand_upgrade_stage1 implementation this patch doesn't change any behaior yet. It only prepares lantiq target for changing nand_do_platform_check (it will be possible after preparing all other targets as well). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46939 2015-09-15 06:13:07 +00:00			`platform_pre_upgrade() {`
lantiq: remove lantiq_board_name, use the generic function instead Signed-off-by: Felix Fietkau <nbd@nbd.name> 2017-03-17 15:21:30 +00:00			`local board=$(board_name)`
lantiq: add platform_pre_upgrade for sysupgrade As explained in recent sysupgrade/nand.sh commits, current NAND sysupgrade is a bit misleading because of nand_do_platform_check behavior. It leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. Please note that because of current nand_upgrade_stage1 implementation this patch doesn't change any behaior yet. It only prepares lantiq target for changing nand_do_platform_check (it will be possible after preparing all other targets as well). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46939 2015-09-15 06:13:07 +00:00
			`case "$board" in`
lantiq: update list on NAND devices in platform_pre_upgrade Meanwhile BTHOMEHUBV5A board was added. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46941 2015-09-15 11:49:33 +00:00			`BTHOMEHUBV2B\|BTHOMEHUBV3A\|BTHOMEHUBV5A\|P2812HNUF* )`
lantiq: add platform_pre_upgrade for sysupgrade As explained in recent sysupgrade/nand.sh commits, current NAND sysupgrade is a bit misleading because of nand_do_platform_check behavior. It leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. Please note that because of current nand_upgrade_stage1 implementation this patch doesn't change any behaior yet. It only prepares lantiq target for changing nand_do_platform_check (it will be possible after preparing all other targets as well). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46939 2015-09-15 06:13:07 +00:00			`nand_do_upgrade $1`
			`;;`
			`esac`
			`}`

adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. SVN-Revision: 24526 2010-12-12 22:57:16 +00:00			`# use default for platform_do_upgrade()`

			`disable_watchdog() {`
			`killall watchdog`
			`( ps \| grep -v 'grep' \| grep '/dev/watchdog' ) && {`
			`echo 'Could not disable watchdog'`
			`return 1`
			`}`
			`}`
			`append sysupgrade_pre_upgrade disable_watchdog`