openwrt/target/linux/ramips/mt76x8/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=mt76x8
BOARDNAME:=MT76x8 based boards
FEATURES+=usb ramdisk
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-mt7603 wpad-basic swconfig
KERNEL_PATCHVER:=5.4

define Target/Description
	Build firmware images for Ralink MT76x8 based boards.
endef
ralink: add support for mt7628 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197 2014-11-06 09:31:31 +00:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

ramips: merge mt7628/mt7688 into mt76x8 The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi" They are essentially a single subtarget. This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> 2017-08-26 09:49:45 +08:00			`SUBTARGET:=mt76x8`
			`BOARDNAME:=MT76x8 based boards`
ramips: add support for ipTIME A604M ipTIME A604M is a 2.4/5GHz band AC1200 router, based on MediaTek MT7628AN. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 5x 10/100Mbps - Switch: SoC internal - UART: - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 Installation via web interface: 1. Flash initramfs image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo <mans0n@gorani.run> 2019-07-21 03:34:59 +09:00			`FEATURES+=usb ramdisk`
ramips: switch from 24kec to 24kc Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 2016-08-08 11:27:04 +02:00			`CPU_TYPE:=24kc`
ralink: add support for mt7628 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197 2014-11-06 09:31:31 +00:00
ramips: move swconfig to subtargets except for MT7621 As MT7621 does not use swconfig anymore, move the package swconfig to other subtargets. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> 2020-03-26 22:00:48 +08:00			`DEFAULT_PACKAGES += kmod-mt7603 wpad-basic swconfig`
ramips: mt76x8: switch to kernel 5.4 4.14 doesn't work anymore due to gpio dt binding changes. Switch mt76x8 to 5.4 directly. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> 2020-04-09 15:30:56 +08:00			`KERNEL_PATCHVER:=5.4`
ramips: enable mt76 on mt7688 by default Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48886 2016-03-02 17:40:58 +00:00
ralink: add support for mt7628 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197 2014-11-06 09:31:31 +00:00			`define Target/Description`
ramips: merge mt7628/mt7688 into mt76x8 The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi" They are essentially a single subtarget. This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> 2017-08-26 09:49:45 +08:00			`Build firmware images for Ralink MT76x8 based boards.`
ralink: add support for mt7628 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197 2014-11-06 09:31:31 +00:00			`endef`