openwrt/target/linux/ath79/dts/qca9563_tplink_re450.dtsi

148 lines
2.5 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
aliases {
label-mac-device = &eth0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
mdio-gpio0 = &mdio2;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tp-link:blue:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "tp-link:blue:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "tp-link:blue:wlan5g";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan_link {
label = "tp-link:green:lan_link";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
lan_data {
label = "tp-link:green:lan_data";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
wps_blue {
label = "tp-link:blue:wps";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
};
wps_red {
label = "tp-link:red:wps";
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
leds {
label = "LED control button";
linux,code = <BTN_0>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
mdio2: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
#address-cells = <1>;
#size-cells = <0>;
phy4: ethernet-phy@4 {
reg = <4>;
device_type = "ethernet-phy";
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&eth0 {
status = "okay";
phy-mode = "sgmii";
phy-handle = <&phy4>;
mtd-mac-address = <&info 0x8>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};