openwrt/target/linux/generic/pending-4.19/748-net-phylink-split-link_an_mode-configured-and-curren.patch

From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sat, 16 Nov 2019 11:30:18 +0000
Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and
 current settings

Split link_an_mode between the configured setting and the current
operating setting.  This is an important distinction to make when we
need to configure PHY mode for a plugged SFP+ module that does not
use in-band signalling.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 59 ++++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 28 deletions(-)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -48,7 +48,8 @@ struct phylink {
 	unsigned long phylink_disable_state; /* bitmask of disables */
 	struct phy_device *phydev;
 	phy_interface_t link_interface;	/* PHY_INTERFACE_xxx */
-	u8 link_an_mode;		/* MLO_AN_xxx */
+	u8 cfg_link_an_mode;		/* MLO_AN_xxx */
+	u8 cur_link_an_mode;
 	u8 link_port;			/* The current non-phy ethtool port */
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
 
@@ -253,12 +254,12 @@ static int phylink_parse_mode(struct phy
 
 	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
 	if (dn || fwnode_property_present(fwnode, "fixed-link"))
-		pl->link_an_mode = MLO_AN_FIXED;
+		pl->cfg_link_an_mode = MLO_AN_FIXED;
 	fwnode_handle_put(dn);
 
 	if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
 	    strcmp(managed, "in-band-status") == 0) {
-		if (pl->link_an_mode == MLO_AN_FIXED) {
+		if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
 			netdev_err(pl->netdev,
 				   "can't use both fixed-link and in-band-status\n");
 			return -EINVAL;
@@ -270,7 +271,7 @@ static int phylink_parse_mode(struct phy
 		phylink_set(pl->supported, Asym_Pause);
 		phylink_set(pl->supported, Pause);
 		pl->link_config.an_enabled = true;
-		pl->link_an_mode = MLO_AN_INBAND;
+		pl->cfg_link_an_mode = MLO_AN_INBAND;
 
 		switch (pl->link_config.interface) {
 		case PHY_INTERFACE_MODE_SGMII:
@@ -330,14 +331,14 @@ static void phylink_mac_config(struct ph
 {
 	netdev_dbg(pl->netdev,
 		   "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
-		   __func__, phylink_an_mode_str(pl->link_an_mode),
+		   __func__, phylink_an_mode_str(pl->cur_link_an_mode),
 		   phy_modes(state->interface),
 		   phy_speed_to_str(state->speed),
 		   phy_duplex_to_str(state->duplex),
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
 		   state->pause, state->link, state->an_enabled);
 
-	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
+	pl->ops->mac_config(pl->netdev, pl->cur_link_an_mode, state);
 }
 
 static void phylink_mac_config_up(struct phylink *pl,
@@ -446,7 +447,7 @@ static void phylink_resolve(struct work_
 	} else if (pl->mac_link_dropped) {
 		link_state.link = false;
 	} else {
-		switch (pl->link_an_mode) {
+		switch (pl->cur_link_an_mode) {
 		case MLO_AN_PHY:
 			link_state = pl->phy_state;
 			phylink_resolve_flow(pl, &link_state);
@@ -483,12 +484,12 @@ static void phylink_resolve(struct work_
 	if (link_state.link != netif_carrier_ok(ndev)) {
 		if (!link_state.link) {
 			netif_carrier_off(ndev);
-			pl->ops->mac_link_down(ndev, pl->link_an_mode,
+			pl->ops->mac_link_down(ndev, pl->cur_link_an_mode,
 					       pl->cur_interface);
 			netdev_info(ndev, "Link is Down\n");
 		} else {
 			pl->cur_interface = link_state.interface;
-			pl->ops->mac_link_up(ndev, pl->link_an_mode,
+			pl->ops->mac_link_up(ndev, pl->cur_link_an_mode,
 					     pl->cur_interface, pl->phydev);
 
 			netif_carrier_on(ndev);
@@ -610,7 +611,7 @@ struct phylink *phylink_create(struct ne
 		return ERR_PTR(ret);
 	}
 
-	if (pl->link_an_mode == MLO_AN_FIXED) {
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
 		ret = phylink_parse_fixedlink(pl, fwnode);
 		if (ret < 0) {
 			kfree(pl);
@@ -618,6 +619,8 @@ struct phylink *phylink_create(struct ne
 		}
 	}
 
+	pl->cur_link_an_mode = pl->cfg_link_an_mode;
+
 	ret = phylink_register_sfp(pl, fwnode);
 	if (ret < 0) {
 		kfree(pl);
@@ -733,8 +736,8 @@ static int phylink_bringup_phy(struct ph
 static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
 			      phy_interface_t interface)
 {
-	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
-		    (pl->link_an_mode == MLO_AN_INBAND &&
+	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
 		     phy_interface_mode_is_8023z(interface))))
 		return -EINVAL;
 
@@ -801,8 +804,8 @@ int phylink_of_phy_connect(struct phylin
 	int ret;
 
 	/* Fixed links and 802.3z are handled without needing a PHY */
-	if (pl->link_an_mode == MLO_AN_FIXED ||
-	    (pl->link_an_mode == MLO_AN_INBAND &&
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
 	     phy_interface_mode_is_8023z(pl->link_interface)))
 		return 0;
 
@@ -813,7 +816,7 @@ int phylink_of_phy_connect(struct phylin
 		phy_node = of_parse_phandle(dn, "phy-device", 0);
 
 	if (!phy_node) {
-		if (pl->link_an_mode == MLO_AN_PHY)
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
 			return -ENODEV;
 		return 0;
 	}
@@ -876,7 +879,7 @@ int phylink_fixed_state_cb(struct phylin
 	/* It does not make sense to let the link be overriden unless we use
 	 * MLO_AN_FIXED
 	 */
-	if (pl->link_an_mode != MLO_AN_FIXED)
+	if (pl->cfg_link_an_mode != MLO_AN_FIXED)
 		return -EINVAL;
 
 	mutex_lock(&pl->state_mutex);
@@ -926,7 +929,7 @@ void phylink_start(struct phylink *pl)
 	ASSERT_RTNL();
 
 	netdev_info(pl->netdev, "configuring for %s/%s link mode\n",
-		    phylink_an_mode_str(pl->link_an_mode),
+		    phylink_an_mode_str(pl->cur_link_an_mode),
 		    phy_modes(pl->link_config.interface));
 
 	/* Always set the carrier off */
@@ -948,7 +951,7 @@ void phylink_start(struct phylink *pl)
 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 	phylink_run_resolve(pl);
 
-	if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
 		int irq = gpiod_to_irq(pl->link_gpio);
 
 		if (irq > 0) {
@@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl)
 		if (irq <= 0)
 			mod_timer(&pl->link_poll, jiffies + HZ);
 	}
-	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
 		mod_timer(&pl->link_poll, jiffies + HZ);
 	if (pl->phydev)
 		phy_start(pl->phydev);
@@ -1090,7 +1093,7 @@ int phylink_ethtool_ksettings_get(struct
 
 	linkmode_copy(kset->link_modes.supported, pl->supported);
 
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		/* We are using fixed settings. Report these as the
 		 * current link settings - and note that these also
@@ -1163,7 +1166,7 @@ int phylink_ethtool_ksettings_set(struct
 		/* If we have a fixed link (as specified by firmware), refuse
 		 * to change link parameters.
 		 */
-		if (pl->link_an_mode == MLO_AN_FIXED &&
+		if (pl->cur_link_an_mode == MLO_AN_FIXED &&
 		    (s->speed != pl->link_config.speed ||
 		     s->duplex != pl->link_config.duplex))
 			return -EINVAL;
@@ -1175,7 +1178,7 @@ int phylink_ethtool_ksettings_set(struct
 		__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
 	} else {
 		/* If we have a fixed link, refuse to enable autonegotiation */
-		if (pl->link_an_mode == MLO_AN_FIXED)
+		if (pl->cur_link_an_mode == MLO_AN_FIXED)
 			return -EINVAL;
 
 		config.speed = SPEED_UNKNOWN;
@@ -1217,7 +1220,7 @@ int phylink_ethtool_ksettings_set(struct
 	 * configuration. For a fixed link, this isn't able to change any
 	 * parameters, which just leaves inband mode.
 	 */
-	if (pl->link_an_mode == MLO_AN_INBAND &&
+	if (pl->cur_link_an_mode == MLO_AN_INBAND &&
 	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
 		phylink_mac_config(pl, &pl->link_config);
 		phylink_mac_an_restart(pl);
@@ -1307,7 +1310,7 @@ int phylink_ethtool_set_pauseparam(struc
 				   pause->tx_pause);
 	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
 			     &pl->phylink_disable_state)) {
-		switch (pl->link_an_mode) {
+		switch (pl->cur_link_an_mode) {
 		case MLO_AN_FIXED:
 			/* Should we allow fixed links to change against the config? */
 			phylink_resolve_flow(pl, config);
@@ -1496,7 +1499,7 @@ static int phylink_mii_read(struct phyli
 	struct phylink_link_state state;
 	int val = 0xffff;
 
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		if (phy_id == 0) {
 			phylink_get_fixed_state(pl, &state);
@@ -1524,7 +1527,7 @@ static int phylink_mii_read(struct phyli
 static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
 			     unsigned int reg, unsigned int val)
 {
-	switch (pl->link_an_mode) {
+	switch (pl->cur_link_an_mode) {
 	case MLO_AN_FIXED:
 		break;
 
@@ -1698,10 +1701,10 @@ static int phylink_sfp_module_insert(voi
 		linkmode_copy(pl->link_config.advertising, config.advertising);
 	}
 
-	if (pl->link_an_mode != MLO_AN_INBAND ||
+	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
 	    pl->link_config.interface != config.interface) {
 		pl->link_config.interface = config.interface;
-		pl->link_an_mode = MLO_AN_INBAND;
+		pl->cur_link_an_mode = MLO_AN_INBAND;
 
 		changed = true;