openwrt/target/linux/generic/hack-6.1/766-net-phy-mediatek-ge-add-LED-configuration-interface.patch

From cc225d163b5a4f7a0d1968298bf7927306646a47 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Fri, 28 Apr 2023 01:53:01 +0200
Subject: [PATCH] net: phy: mediatek-ge: add LED configuration interface

This adds a small hack similar to the one used for ar8xxx switches to
read a reg:value map for configuring the LED configuration registers.

This allows OpenWrt to write device-specific LED action as well as blink
configurations. It is unlikely to be accepted upstream, as upstream
plans on integrating their own framework for handling these LEDs.

Signed-off-by: David Bauer <mail@david-bauer.net>
---
 drivers/net/phy/mediatek-ge.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

--- a/drivers/net/phy/mediatek-ge.c
+++ b/drivers/net/phy/mediatek-ge.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0+
+#include <linux/of.h>
 #include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/phy.h>
@@ -53,6 +54,36 @@ static int mt7530_phy_config_init(struct
 	return 0;
 }
 
+static int mt7530_led_config_of(struct phy_device *phydev)
+{
+	struct device_node *np = phydev->mdio.dev.of_node;
+	const __be32 *paddr;
+	int len;
+	int i;
+
+	paddr = of_get_property(np, "mediatek,led-config", &len);
+	if (!paddr)
+		return 0;
+
+	if (len < (2 * sizeof(*paddr)))
+		return -EINVAL;
+
+	len /= sizeof(*paddr);
+
+	phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
+	for (i = 0; i < len - 1; i += 2) {
+		u32 reg;
+		u32 val;
+
+		reg = be32_to_cpup(paddr + i);
+		val = be32_to_cpup(paddr + i + 1);
+
+		phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
+	}
+
+	return 0;
+}
+
 static int mt7531_phy_config_init(struct phy_device *phydev)
 {
 	mtk_gephy_config_init(phydev);
@@ -65,6 +96,9 @@ static int mt7531_phy_config_init(struct
 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
 
+	/* LED Config*/
+	mt7530_led_config_of(phydev);
+
 	return 0;
 }