ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 23:12:32 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
765f66810a
openwrt/target/linux/mpc85xx/image/p1010.mk

77 lines
2.5 KiB
Makefile
Raw Normal View History

mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
define Build/spi-loader-okli-compile
rm -rf $@.spi-loader-okli
$(CP) spi-loader $@.spi-loader-okli
$(MAKE) -C $@.spi-loader-okli \
CROSS_COMPILE="$(TARGET_CROSS)" CONFIG="$(DEVICE_NAME)"
cp "$@.spi-loader-okli/out/uImage" "$@"
rm -rf $@.spi-loader-okli
endef
define Build/spi-loader-okli
cat $(KDIR)/loader-$(1) "$@" > "$@.new"
mv "$@.new" "$@"
endef
mpc85xx: add support for Enterasys WS-AP3715i Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
2023-03-18 01:28:23 +00:00
define Device/enterasys_ws-ap3715i
DEVICE_VENDOR := Enterasys
DEVICE_MODEL := WS-AP3715i
BLOCKSIZE := 64k
KERNEL_NAME := simpleImage.ws-ap3715i
KERNEL_ENTRY := 0x1000000
KERNEL_LOADADDR := 0x1000000
KERNEL = kernel-bin | lzma | uImage lzma
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += enterasys_ws-ap3715i
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
define Device/tplink_tl-wdr4900-v1
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := TL-WDR4900
DEVICE_VARIANT := v1
mcp85xx: Switch TP-Link TL-WDR4900 v1 to DSA This patch introduces DSA support for TP-Link TL-WDR4900 v1 switch. Swconfig driver for QCA8327 switch is removed because this router is only one device which use Qualcom swconfig switch. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Nick Hainke <vincent@systemli.org> # TP Link WDR4900 v1 (5.15)
2022-09-29 20:25:24 +00:00
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
TPLINK_HEADER_VERSION := 1
TPLINK_HWID := 0x49000001
TPLINK_HWREV := 1
TPLINK_FLASHLAYOUT := 16Mppc
KERNEL_NAME := simpleImage.tl-wdr4900-v1
KERNEL_INITRAMFS :=
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
KERNEL := kernel-bin | uImage none -M 0x4f4b4c49 | spi-loader-okli $(1)
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
KERNEL_ENTRY := 0x1000000
KERNEL_LOADADDR := 0x1000000
SUPPORTED_DEVICES += tl-wdr4900-v1
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
COMPILE := loader-$(1)
COMPILE/loader-$(1) := spi-loader-okli-compile
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
ARTIFACTS := fdt.bin
ARTIFACT/fdt.bin := append-dtb
mpc85xx: remove fdt.bin image When converting the fdt binary to be created as an artifact, the image receipt was dropped but the entry in the target images list was not. Fixes commit 1e41de2f48e2 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage") Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 12:16:01 +00:00
IMAGES := factory.bin sysupgrade.bin
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
IMAGE/factory.bin := tplink-v1-image factory
endef
TARGET_DEVICES += tplink_tl-wdr4900-v1
mpc85xx: add support for Watchguard Firebox T10 Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net>
2023-02-18 01:06:54 +00:00
define Device/watchguard_firebox-t10
DEVICE_VENDOR := Watchguard
DEVICE_MODEL := Firebox T10
DEVICE_PACKAGES := kmod-rtc-s35390a kmod-eeprom-at24
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += watchguard_firebox-t10
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
define Device/sophos_red-15w-rev1
DEVICE_VENDOR := Sophos
DEVICE_MODEL := RED 15w
DEVICE_VARIANT := Rev.1
# Original firmware uses a dedicated DTB-partition.
# The bootloader however supports FIT-images.
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += sophos_red-15w-rev1
Reference in New Issue Copy Permalink