ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-03-13 07:54:14 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
openwrt/target/linux/realtek/base-files/etc/board.d/05_compat-version

35 lines
609 B
Plaintext
Raw Normal View History

realtek: generate compat_version 2.0 for GS1900 The GS1900 images have been updated to have a larger firmware partition, bumping the compatibility version to 2.0. However, since this version is generated on first boot and the default was used, these images still advertised 1.0 after a fresh install. Add a new uci-defaults script that will generate the correct version for all affected Zyxel GS1900 devices. Fixes: 35acdbe9095d ("realtek: merge Zyxel GS1900 firmware partitions") Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-12-24 09:56:11 +01:00
#
# Copyright (C) 2020 OpenWrt.org
#
. /lib/functions.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$(board_name)" in
realtek: HPE 1920 24G PoE+ 180W/370W move fans to hwmon Apply the equivalent of commit f64541db020e ("realtek: HPE 1920 8G PoE+ 180W move fans to hwmon") to the 24-ports variants of the HPE 1920 PoE+ switches, with model numbers JG925A and JG926A. Copy from the original commit message: Move to using hwmon and gpio-fan. This is by adding gpio_fan_array to DTS and kmod-hwmon-gpiofan to DEVICE_PACKAGES. In combination with the new rtl8231 gpio driver the default fan behaviour will be maximum fan speed. Bump compat value to 1.1 due to existing config in /etc/config/system via gpio_switch. Also notify in device compat that fan is now going to be at bootloader setting (maximum in this case) by default unless turned down. As the init script 03_gpio_switches does not perform any action after removing these devices from it, the file can be dropped. Link: https://github.com/openwrt/openwrt/pull/17598 Signed-off-by: Fabian Groffen <grobian@gentoo.org> Signed-off-by: Sander Vanheule <sander@svanheule.net>
2025-01-15 20:12:02 +01:00
hpe,1920-8g-poe-180w | \
hpe,1920-24g-poe-180w | \
hpe,1920-24g-poe-370w)
realtek: HPE 1920 8G PoE+ 180W move fans to hwmon The GPIO numbering has changed and is not stable. As a result fan control via gpio_switch is broken, resulting in errors: "export_store: invalid GPIO 456" Move to using hwmon and gpio-fan. This is by adding gpio_fan_array to DTS and kmod-hwmon-gpiofan to DEVICE_PACKAGES. In combination with the new rtl8231 gpio driver the default fan behaviour will be maximum fan speed. Bump compat value to 1.1 due to existing config in /etc/config/system via gpio_switch. Also notify in device compat that fan is now going to be at bootloader setting (maximum in this case) by default unless turned down. Signed-off-by: Evan Jobling <evan@jobling.au> Link: https://github.com/openwrt/openwrt/pull/17605 Signed-off-by: Sander Vanheule <sander@svanheule.net>
2025-01-14 12:13:21 +00:00
ucidef_set_compat_version "1.1"
;;
realtek: Split Zyxel GS1900-8 into v1 and v2 Zyxel GS1900-8 v2 devices have been produced more recently than v1 devices. As there are v1 boards with RTL8380M rev. C SoCs, it can likely safely be assumed that all v2 devices will also have a recent SoC revision, supporting the hardware auxiliary MDIO controller. Make the GS1900-8 v1 use an emulated auxiliary MDIO bus, for backward compatibility with devices containing an RTL8380M rev. A. Since the devicetrees are otherwise identical, GS1900-8 v1 devices with an RTL8380M rev. B or C will also be able to use the (more efficient) v2 image. This includes any currently functioning device with OpenWrt, so include the old compatible as a supported device for the GS1900-8 v2. Link: https://github.com/openwrt/openwrt/issues/9534 Signed-off-by: Sander Vanheule <sander@svanheule.net>
2025-01-22 12:25:18 +01:00
zyxel,gs1900-8-v1 | \
zyxel,gs1900-8-v2 | \
realtek: generate compat_version 2.0 for GS1900 The GS1900 images have been updated to have a larger firmware partition, bumping the compatibility version to 2.0. However, since this version is generated on first boot and the default was used, these images still advertised 1.0 after a fresh install. Add a new uci-defaults script that will generate the correct version for all affected Zyxel GS1900 devices. Fixes: 35acdbe9095d ("realtek: merge Zyxel GS1900 firmware partitions") Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-12-24 09:56:11 +01:00
zyxel,gs1900-8hp-v1 | \
zyxel,gs1900-8hp-v2 | \
zyxel,gs1900-10hp | \
zyxel,gs1900-16 | \
zyxel,gs1900-24e | \
zyxel,gs1900-24ep | \
zyxel,gs1900-24hp-v1 | \
zyxel,gs1900-24hp-v2 | \
zyxel,gs1900-24-v1 | \
zyxel,gs1900-48)
ucidef_set_compat_version "2.0"
;;
esac
board_config_flush
exit 0
Reference in New Issue Copy Permalink