openwrt/target/linux/ramips/dts/mt7621_wevo_w2914ns-v2.dts

/dts-v1/;

#include "mt7621_wevo_w2914ns-v2.dtsi"

/ {
	model = "WeVO W2914NS v2";

	leds {
		compatible = "gpio-leds";

		usb {
			label = "w2914nsv2:green:usb";
			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
			trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
			linux,default-trigger = "usbport";
		};
	};
};
ramips: add support for WeVO W2914NS v2 Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe> 2016-11-18 11:46:27 +00:00			`/dts-v1/;`

ramips/mt7621: Name DTS files based on scheme As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2019-07-03 21:22:28 +00:00			`#include "mt7621_wevo_w2914ns-v2.dtsi"`
ramips: add support for WeVO W2914NS v2 Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe> 2016-11-18 11:46:27 +00:00
			`/ {`
			`model = "WeVO W2914NS v2";`

ramips: dts: Unify naming of gpio-led nodes In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up] 2018-12-30 11:42:53 +00:00			`leds {`
ramips: use destinct 11AC NAS board name Use a distinct board name even if the board is near to identical to the WeVO W2914NS v2. To make sure that a 11AC NAS image can not be installed on a WeVO W2914NS v2, both board need to use different names. Signed-off-by: Mathias Kresin <dev@kresin.me> 2016-12-23 07:21:31 +00:00			`compatible = "gpio-leds";`

			`usb {`
			`label = "w2914nsv2:green:usb";`
			`gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;`
ramips: set usb led trigger via devicetree Assign the usbdev trigger via devicetree for all subtargets and drop the userspace handling of the usb leds. With the change all usb ports are triggering the usb led instead of only usb 1.1 XOR usb 2.0 XOR usb 3.0 as it was before. Signed-off-by: Mathias Kresin <dev@kresin.me> 2018-08-13 15:14:08 +00:00			`trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;`
			`linux,default-trigger = "usbport";`
ramips: use destinct 11AC NAS board name Use a distinct board name even if the board is near to identical to the WeVO W2914NS v2. To make sure that a 11AC NAS image can not be installed on a WeVO W2914NS v2, both board need to use different names. Signed-off-by: Mathias Kresin <dev@kresin.me> 2016-12-23 07:21:31 +00:00			`};`
			`};`
ramips: add support for WeVO W2914NS v2 Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe> 2016-11-18 11:46:27 +00:00			`};`