openwrt/target/linux/brcm2708/patches-4.14/950-0245-irqchip-bcm2836-Move-SMP-startup-code-to-arch-arm-v2.patch

From 827d93b06aefb4fd03f9a6a0c3774a14fd5bd291 Mon Sep 17 00:00:00 2001
From: Stefan Wahren <stefan.wahren@i2se.com>
Date: Sun, 6 Aug 2017 17:52:02 +0200
Subject: [PATCH 245/454] irqchip: bcm2836: Move SMP startup code to arch/arm
 (v2)

commit 88bbe85dcd37aa2662c1a83962c15009fc12503e upstream.

In order to easily provide SMP for BCM2837 on 32-bit and 64-bit
the SMP startup code was placed in irq-bcm2836. That's not the
right approach. So move this code where it belongs.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836")
Tested-by: Eric Anholt <eric@anholt.net>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm/mach-bcm/Makefile          |  5 ++
 arch/arm/mach-bcm/board_bcm2835.c   |  5 +-
 arch/arm/mach-bcm/platsmp.c         | 35 ++++++++++++
 arch/arm/mach-bcm/platsmp.h         | 10 ++++
 drivers/irqchip/irq-bcm2836.c       | 82 +----------------------------
 include/linux/irqchip/irq-bcm2836.h | 70 ++++++++++++++++++++++++
 6 files changed, 126 insertions(+), 81 deletions(-)
 create mode 100644 arch/arm/mach-bcm/platsmp.h
 create mode 100644 include/linux/irqchip/irq-bcm2836.h

--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -43,6 +43,11 @@ endif
 
 # BCM2835
 obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+ifeq ($(CONFIG_ARM),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
+endif
 
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "platsmp.h"
 #include <linux/dma-mapping.h>
 
 static void __init bcm2835_init(void)
@@ -49,6 +50,7 @@ static const char * const bcm2835_compat
 #endif
 #ifdef CONFIG_ARCH_MULTI_V7
 	"brcm,bcm2836",
+	"brcm,bcm2837",
 #endif
 	NULL
 };
@@ -56,5 +58,6 @@ static const char * const bcm2835_compat
 DT_MACHINE_START(BCM2835, "BCM2835")
 	.init_machine = bcm2835_init,
 	.init_early = bcm2835_init_early,
-	.dt_compat = bcm2835_compat
+	.dt_compat = bcm2835_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
 MACHINE_END
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip/irq-bcm2836.h>
 #include <linux/jiffies.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -287,6 +288,35 @@ out:
 	return ret;
 }
 
+static int bcm2836_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *intc_base;
+	struct device_node *dn;
+	char *name;
+
+	name = "brcm,bcm2836-l1-intc";
+	dn = of_find_compatible_node(NULL, NULL, name);
+	if (!dn) {
+		pr_err("unable to find intc node\n");
+		return -ENODEV;
+	}
+
+	intc_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!intc_base) {
+		pr_err("unable to remap intc base register\n");
+		return -ENOMEM;
+	}
+
+	writel(virt_to_phys(secondary_startup),
+	       intc_base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
+
+	iounmap(intc_base);
+
+	return 0;
+}
+
 static const struct smp_operations kona_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
 	.smp_boot_secondary	= kona_boot_secondary,
@@ -305,3 +335,8 @@ static const struct smp_operations nsp_s
 	.smp_boot_secondary	= nsp_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
+
+const struct smp_operations bcm2836_smp_ops __initconst = {
+	.smp_boot_secondary	= bcm2836_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm2836, "brcm,bcm2836-smp", &bcm2836_smp_ops);
--- /dev/null
+++ b/arch/arm/mach-bcm/platsmp.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ */
+
+extern const struct smp_operations bcm2836_smp_ops;
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -19,62 +19,9 @@
 #include <linux/of_irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
-#include <asm/exception.h>
-
-#define LOCAL_CONTROL			0x000
-#define LOCAL_PRESCALER			0x008
+#include <linux/irqchip/irq-bcm2836.h>
 
-/*
- * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
- * next 2 bits identify the CPU that the GPU FIQ goes to.
- */
-#define LOCAL_GPU_ROUTING		0x00c
-/* When setting bits 0-3, enables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_SET		0x010
-/* When setting bits 0-3, disables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_CLR		0x014
-/*
- * The low 4 bits of this are the CPU's timer IRQ enables, and the
- * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
- * bits).
- */
-#define LOCAL_TIMER_INT_CONTROL0	0x040
-/*
- * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
- * the next 4 bits are the CPU's per-mailbox FIQ enables (which
- * override the IRQ bits).
- */
-#define LOCAL_MAILBOX_INT_CONTROL0	0x050
-/*
- * The CPU's interrupt status register.  Bits are defined by the the
- * LOCAL_IRQ_* bits below.
- */
-#define LOCAL_IRQ_PENDING0		0x060
-/* Same status bits as above, but for FIQ. */
-#define LOCAL_FIQ_PENDING0		0x070
-/*
- * Mailbox write-to-set bits.  There are 16 mailboxes, 4 per CPU, and
- * these bits are organized by mailbox number and then CPU number.  We
- * use mailbox 0 for IPIs.  The mailbox's interrupt is raised while
- * any bit is set.
- */
-#define LOCAL_MAILBOX0_SET0		0x080
-#define LOCAL_MAILBOX3_SET0		0x08c
-/* Mailbox write-to-clear bits. */
-#define LOCAL_MAILBOX0_CLR0		0x0c0
-#define LOCAL_MAILBOX3_CLR0		0x0cc
-
-#define LOCAL_IRQ_CNTPSIRQ	0
-#define LOCAL_IRQ_CNTPNSIRQ	1
-#define LOCAL_IRQ_CNTHPIRQ	2
-#define LOCAL_IRQ_CNTVIRQ	3
-#define LOCAL_IRQ_MAILBOX0	4
-#define LOCAL_IRQ_MAILBOX1	5
-#define LOCAL_IRQ_MAILBOX2	6
-#define LOCAL_IRQ_MAILBOX3	7
-#define LOCAL_IRQ_GPU_FAST	8
-#define LOCAL_IRQ_PMU_FAST	9
-#define LAST_IRQ		LOCAL_IRQ_PMU_FAST
+#include <asm/exception.h>
 
 struct bcm2836_arm_irqchip_intc {
 	struct irq_domain *domain;
@@ -240,27 +187,6 @@ static int bcm2836_cpu_dying(unsigned in
 					     cpu);
 	return 0;
 }
-
-#ifdef CONFIG_ARM
-static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
-					     struct task_struct *idle)
-{
-	unsigned long secondary_startup_phys =
-		(unsigned long)virt_to_phys((void *)secondary_startup);
-
-	writel(secondary_startup_phys,
-	       intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
-
-	dsb(sy); /* Ensure write has completed before waking the other CPUs */
-	sev();
-
-	return 0;
-}
-
-static const struct smp_operations bcm2836_smp_ops __initconst = {
-	.smp_boot_secondary	= bcm2836_smp_boot_secondary,
-};
-#endif
 #endif
 
 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
@@ -277,10 +203,6 @@ bcm2836_arm_irqchip_smp_init(void)
 			  bcm2836_cpu_dying);
 
 	set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
-
-#ifdef CONFIG_ARM
-	smp_set_ops(&bcm2836_smp_ops);
-#endif
 #endif
 }
 
--- /dev/null
+++ b/include/linux/irqchip/irq-bcm2836.h
@@ -0,0 +1,70 @@
+/*
+ * Root interrupt controller for the BCM2836 (Raspberry Pi 2).
+ *
+ * Copyright 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define LOCAL_CONTROL			0x000
+#define LOCAL_PRESCALER			0x008
+
+/*
+ * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
+ * next 2 bits identify the CPU that the GPU FIQ goes to.
+ */
+#define LOCAL_GPU_ROUTING		0x00c
+/* When setting bits 0-3, enables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_SET		0x010
+/* When setting bits 0-3, disables PMU interrupts on that CPU. */
+#define LOCAL_PM_ROUTING_CLR		0x014
+/*
+ * The low 4 bits of this are the CPU's timer IRQ enables, and the
+ * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
+ * bits).
+ */
+#define LOCAL_TIMER_INT_CONTROL0	0x040
+/*
+ * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
+ * the next 4 bits are the CPU's per-mailbox FIQ enables (which
+ * override the IRQ bits).
+ */
+#define LOCAL_MAILBOX_INT_CONTROL0	0x050
+/*
+ * The CPU's interrupt status register.  Bits are defined by the the
+ * LOCAL_IRQ_* bits below.
+ */
+#define LOCAL_IRQ_PENDING0		0x060
+/* Same status bits as above, but for FIQ. */
+#define LOCAL_FIQ_PENDING0		0x070
+/*
+ * Mailbox write-to-set bits.  There are 16 mailboxes, 4 per CPU, and
+ * these bits are organized by mailbox number and then CPU number.  We
+ * use mailbox 0 for IPIs.  The mailbox's interrupt is raised while
+ * any bit is set.
+ */
+#define LOCAL_MAILBOX0_SET0		0x080
+#define LOCAL_MAILBOX3_SET0		0x08c
+/* Mailbox write-to-clear bits. */
+#define LOCAL_MAILBOX0_CLR0		0x0c0
+#define LOCAL_MAILBOX3_CLR0		0x0cc
+
+#define LOCAL_IRQ_CNTPSIRQ	0
+#define LOCAL_IRQ_CNTPNSIRQ	1
+#define LOCAL_IRQ_CNTHPIRQ	2
+#define LOCAL_IRQ_CNTVIRQ	3
+#define LOCAL_IRQ_MAILBOX0	4
+#define LOCAL_IRQ_MAILBOX1	5
+#define LOCAL_IRQ_MAILBOX2	6
+#define LOCAL_IRQ_MAILBOX3	7
+#define LOCAL_IRQ_GPU_FAST	8
+#define LOCAL_IRQ_PMU_FAST	9
+#define LAST_IRQ		LOCAL_IRQ_PMU_FAST