openwrt/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts

276 lines
4.5 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7981.dtsi"
/ {
model = "ABT ASR3000";
compatible = "abt,asr3000", "mediatek,mt7981";
aliases {
led-boot = &mesh_led;
led-failsafe = &mesh_led;
led-upgrade = &mesh_led;
label-mac-device = &gmac1;
serial0 = &uart0;
};
chosen {
rootdisk = <&ubi_rootdisk>;
stdout-path = "serial0:115200n8";
};
memory@40000000 {
reg = <0 0x40000000 0 0x10000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
linux,code = <BTN_9>;
linux,input-type = <EV_SW>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
led-0 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
led-1 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
};
mesh_led: led-2 {
label = "green:mesh";
gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
};
led-3 {
function = LED_FUNCTION_WLAN_2GHZ;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
};
led-4 {
function = LED_FUNCTION_WLAN_5GHZ;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
};
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "art";
reg = <0x180000 0x100000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@280000 {
label = "factory";
reg = <0x280000 0x100000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
};
};
partition@380000 {
label = "fip";
reg = <0x380000 0x200000>;
read-only;
};
partition@580000 {
compatible = "linux,ubi";
label = "ubi";
reg = <0x580000 0x7a80000>;
volumes {
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
};
};
};
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan3";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan1";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
status = "okay";
};