openwrt/target/linux/bcm27xx/patches-6.6/950-1100-drivers-pcie-brcmstb-add-best-effort-workaround-for-.patch

From 0a19b5256303d2f35be9272832b01a170c9a039b Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.com>
Date: Wed, 22 May 2024 09:46:54 +0100
Subject: [PATCH 1100/1135] drivers: pcie-brcmstb: add best-effort workaround
 for QoS bug on bcm2712

If a set of read requests are issued by an endpoint, they are streamed
into a resynchronisation FIFO prior to exiting the RC. This FIFO has an
edge case where it can drop QoS for a request to 0 if there's a single
outstanding read request in the FIFO, and another is pushed when the
FIFO is popped. Requests with a QoS of 0 can take hundreds of
microseconds to complete.

By adding an experimentally-determined amount of backpressure on the pop
side, the critical level transition can largely be avoided.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -568,6 +568,18 @@ static void brcm_pcie_set_tc_qos(struct
 		AXI_DIS_QOS_GATING_IN_MASTER;
 	writel(reg, pcie->base + PCIE_MISC_AXI_INTF_CTRL);
 
+	/*
+	 * If the QOS_UPDATE_TIMING_FIX bit is Reserved-0, then this is a
+	 * 2712C1 chip, or a single-lane RC. Use the best-effort alternative
+	 * which is to partially throttle AXI requests in-flight to the SDC.
+	 */
+	reg = readl(pcie->base + PCIE_MISC_AXI_INTF_CTRL);
+	if (!(reg & AXI_EN_QOS_UPDATE_TIMING_FIX)) {
+		reg &= ~AXI_MASTER_MAX_OUTSTANDING_REQUESTS_MASK;
+		reg |= 15;
+		writel(reg, pcie->base + PCIE_MISC_AXI_INTF_CTRL);
+	}
+
 	/* Disable VDM reception by default - QoS map defaults to 0 */
 	reg = readl(pcie->base + PCIE_MISC_CTRL_1);
 	reg &= ~PCIE_MISC_CTRL_1_EN_VDM_QOS_CONTROL_MASK;