openwrt/target/linux/bcm27xx/patches-6.6/950-0086-Main-bcm2708-bcm2709-linux-port.patch

151 lines
4.3 KiB
Diff
Raw Normal View History

From 468129d64e78a1415f2fa40946103bbd24a2e367 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Sun, 12 May 2013 12:24:19 +0100
Subject: [PATCH 0086/1085] Main bcm2708/bcm2709 linux port
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: popcornmix <popcornmix@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2709: Drop platform smp and timer init code
irq-bcm2836 handles this through these functions:
bcm2835_init_local_timer_frequency()
bcm2836_arm_irqchip_smp_init()
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm270x: Use watchdog for reboot/poweroff
The watchdog driver already has support for reboot/poweroff.
Make use of this and remove the code from the platform files.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
board_bcm2835: Remove coherent dma pool increase - API has gone
---
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm/mm/proc-v6.S | 15 ++++++++++++---
drivers/irqchip/irq-bcm2835.c | 7 ++++++-
drivers/mailbox/bcm2835-mailbox.c | 18 ++++++++++++++++--
4 files changed, 35 insertions(+), 6 deletions(-)
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -163,6 +163,7 @@ config ARCH_BCM2835
select PINCTRL
select PINCTRL_BCM2835
select MFD_CORE
+ select MFD_SYSCON if ARCH_MULTI_V7
help
This enables support for the Broadcom BCM2711 and BCM283x SoCs.
This SoC is used in the Raspberry Pi and Roku 2 devices.
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -72,10 +72,19 @@ ENDPROC(cpu_v6_reset)
*
* IRQs are already disabled.
*/
+
+/* See jira SW-5991 for details of this workaround */
ENTRY(cpu_v6_do_idle)
- mov r1, #0
- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
+ .align 5
+ mov r1, #2
+1: subs r1, #1
+ nop
+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt
+ nop
+ nop
+ nop
+ bne 1b
ret lr
ENTRY(cpu_v6_dcache_clean_area)
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -43,7 +43,9 @@
#include <linux/irqdomain.h>
#include <asm/exception.h>
+#ifndef CONFIG_ARM64
#include <asm/mach/irq.h>
+#endif
/* Put the bank and irq (32 bits) into the hwirq */
#define MAKE_HWIRQ(b, n) (((b) << 5) | (n))
@@ -72,6 +74,7 @@
#define NR_BANKS 3
#define IRQS_PER_BANK 32
#define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0)
+#undef FIQ_START
#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0))
static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
@@ -253,10 +256,12 @@ static int __init armctrl_of_init(struct
MAKE_HWIRQ(b, i) + NUMBER_IRQS);
BUG_ON(irq <= 0);
irq_set_chip(irq, &armctrl_chip);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_probe(irq);
}
}
+#ifndef CONFIG_ARM64
init_FIQ(FIQ_START);
+#endif
return 0;
}
--- a/drivers/mailbox/bcm2835-mailbox.c
+++ b/drivers/mailbox/bcm2835-mailbox.c
@@ -45,12 +45,15 @@
#define MAIL1_WRT (ARM_0_MAIL1 + 0x00)
#define MAIL1_STA (ARM_0_MAIL1 + 0x18)
+/* On ARCH_BCM270x these come through <linux/interrupt.h> (arm_control.h ) */
+#ifndef ARM_MS_FULL
/* Status register: FIFO state. */
#define ARM_MS_FULL BIT(31)
#define ARM_MS_EMPTY BIT(30)
/* Configuration register: Enable interrupts. */
#define ARM_MC_IHAVEDATAIRQEN BIT(0)
+#endif
struct bcm2835_mbox {
void __iomem *regs;
@@ -144,7 +147,7 @@ static int bcm2835_mbox_probe(struct pla
return -ENOMEM;
spin_lock_init(&mbox->lock);
- ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
bcm2835_mbox_irq, 0, dev_name(dev), mbox);
if (ret) {
dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
@@ -192,7 +195,18 @@ static struct platform_driver bcm2835_mb
},
.probe = bcm2835_mbox_probe,
};
-module_platform_driver(bcm2835_mbox_driver);
+
+static int __init bcm2835_mbox_init(void)
+{
+ return platform_driver_register(&bcm2835_mbox_driver);
+}
+arch_initcall(bcm2835_mbox_init);
+
+static void __init bcm2835_mbox_exit(void)
+{
+ platform_driver_unregister(&bcm2835_mbox_driver);
+}
+module_exit(bcm2835_mbox_exit);
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
MODULE_DESCRIPTION("BCM2835 mailbox IPC driver");