openwrt/target/linux/brcm2708/patches-4.14/950-0346-drm-vc4-Move-plane-state-to-header.patch

158 lines
4.4 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From 3747cef056a2b6def75521dc2fd9157b009715e2 Mon Sep 17 00:00:00 2001
From: Stefan Schake <stschake@gmail.com>
Date: Fri, 9 Mar 2018 01:53:36 +0100
Subject: [PATCH 346/454] drm/vc4: Move plane state to header
commit 823646983b5a31732ae82ffa60b74555857eb8a0 upstream.
We need to reference it from the CRTC to make a decision for enabling
background color fill.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1520556817-97297-4-git-send-email-stschake@gmail.com
---
drivers/gpu/drm/vc4/vc4_drv.h | 60 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/vc4/vc4_plane.c | 60 ---------------------------------
2 files changed, 60 insertions(+), 60 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -278,6 +278,66 @@ to_vc4_plane(struct drm_plane *plane)
return (struct vc4_plane *)plane;
}
+enum vc4_scaling_mode {
+ VC4_SCALING_NONE,
+ VC4_SCALING_TPZ,
+ VC4_SCALING_PPF,
+};
+
+struct vc4_plane_state {
+ struct drm_plane_state base;
+ /* System memory copy of the display list for this element, computed
+ * at atomic_check time.
+ */
+ u32 *dlist;
+ u32 dlist_size; /* Number of dwords allocated for the display list */
+ u32 dlist_count; /* Number of used dwords in the display list. */
+
+ /* Offset in the dlist to various words, for pageflip or
+ * cursor updates.
+ */
+ u32 pos0_offset;
+ u32 pos2_offset;
+ u32 ptr0_offset;
+
+ /* Offset where the plane's dlist was last stored in the
+ * hardware at vc4_crtc_atomic_flush() time.
+ */
+ u32 __iomem *hw_dlist;
+
+ /* Clipped coordinates of the plane on the display. */
+ int crtc_x, crtc_y, crtc_w, crtc_h;
+ /* Clipped area being scanned from in the FB. */
+ u32 src_x, src_y;
+
+ u32 src_w[2], src_h[2];
+
+ /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
+ enum vc4_scaling_mode x_scaling[2], y_scaling[2];
+ bool is_unity;
+ bool is_yuv;
+
+ /* Offset to start scanning out from the start of the plane's
+ * BO.
+ */
+ u32 offsets[3];
+
+ /* Our allocation in LBM for temporary storage during scaling. */
+ struct drm_mm_node lbm;
+
+ /* Set when the plane has per-pixel alpha content or does not cover
+ * the entire screen. This is a hint to the CRTC that it might need
+ * to enable background color fill.
+ */
+ bool needs_bg_fill;
+};
+
+static inline struct vc4_plane_state *
+to_vc4_plane_state(struct drm_plane_state *state)
+{
+ return (struct vc4_plane_state *)state;
+}
+
enum vc4_encoder_type {
VC4_ENCODER_TYPE_NONE,
VC4_ENCODER_TYPE_HDMI,
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -27,66 +27,6 @@
#include "vc4_drv.h"
#include "vc4_regs.h"
-enum vc4_scaling_mode {
- VC4_SCALING_NONE,
- VC4_SCALING_TPZ,
- VC4_SCALING_PPF,
-};
-
-struct vc4_plane_state {
- struct drm_plane_state base;
- /* System memory copy of the display list for this element, computed
- * at atomic_check time.
- */
- u32 *dlist;
- u32 dlist_size; /* Number of dwords allocated for the display list */
- u32 dlist_count; /* Number of used dwords in the display list. */
-
- /* Offset in the dlist to various words, for pageflip or
- * cursor updates.
- */
- u32 pos0_offset;
- u32 pos2_offset;
- u32 ptr0_offset;
-
- /* Offset where the plane's dlist was last stored in the
- * hardware at vc4_crtc_atomic_flush() time.
- */
- u32 __iomem *hw_dlist;
-
- /* Clipped coordinates of the plane on the display. */
- int crtc_x, crtc_y, crtc_w, crtc_h;
- /* Clipped area being scanned from in the FB. */
- u32 src_x, src_y;
-
- u32 src_w[2], src_h[2];
-
- /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
- enum vc4_scaling_mode x_scaling[2], y_scaling[2];
- bool is_unity;
- bool is_yuv;
-
- /* Offset to start scanning out from the start of the plane's
- * BO.
- */
- u32 offsets[3];
-
- /* Our allocation in LBM for temporary storage during scaling. */
- struct drm_mm_node lbm;
-
- /* Set when the plane has per-pixel alpha content or does not cover
- * the entire screen. This is a hint to the CRTC that it might need
- * to enable background color fill.
- */
- bool needs_bg_fill;
-};
-
-static inline struct vc4_plane_state *
-to_vc4_plane_state(struct drm_plane_state *state)
-{
- return (struct vc4_plane_state *)state;
-}
-
static const struct hvs_format {
u32 drm; /* DRM_FORMAT_* */
u32 hvs; /* HVS_FORMAT_* */