openwrt/target/linux/brcm2708/patches-4.14/950-0195-BCM270X_DT-More-cosmetic-DT-changes.patch

188 lines
3.6 KiB
Diff
Raw Normal View History

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
From 6f6916802d79d16acd3339f96a2d87da52fa1ad1 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 6 Feb 2018 13:10:09 +0000
Subject: [PATCH 195/454] BCM270X_DT: More cosmetic DT changes
Remove unnecessary duplicate labels (but keep spi0).
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/bcm2708-rpi.dtsi | 5 ----
arch/arm/boot/dts/bcm270x.dtsi | 15 ++++------
.../dts/overlays/vc4-fkms-v3d-overlay.dts | 2 +-
.../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 29 +++++++------------
4 files changed, 17 insertions(+), 34 deletions(-)
--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
@@ -81,11 +81,6 @@
status = "okay";
};
- thermal: thermal@7e212000 {
- #thermal-sensor-cells = <0>;
- status = "okay";
- };
-
/* Onboard audio */
audio: audio {
compatible = "brcm,bcm2835-audio";
--- a/arch/arm/boot/dts/bcm270x.dtsi
+++ b/arch/arm/boot/dts/bcm270x.dtsi
@@ -12,10 +12,6 @@
/* Add alias */
};
- cprman: cprman@7e101000 {
- /* Add alias */
- };
-
random: rng@7e104000 {
/* Add alias */
};
@@ -94,7 +90,7 @@
reg = <0x7e600000 0x100>;
interrupts = <2 16>;
clocks = <&clocks BCM2835_CLOCK_SMI>;
- assigned-clocks = <&cprman BCM2835_CLOCK_SMI>;
+ assigned-clocks = <&clocks BCM2835_CLOCK_SMI>;
assigned-clock-rates = <125000000>;
dmas = <&dma 4>;
dma-names = "rx-tx";
@@ -124,11 +120,6 @@
status = "disabled";
};
- gpu: gpu {
- /* Add alias */
- status = "disabled";
- };
-
axiperf: axiperf {
compatible = "brcm,bcm2835-axiperf";
reg = <0x7e009800 0x100>,
@@ -177,3 +168,7 @@
interrupt-parent = <&aux>;
interrupts = <2>;
};
+
+&vc4 {
+ status = "disabled";
+};
--- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts
@@ -66,7 +66,7 @@
};
fragment@8 {
- target = <&gpu>;
+ target = <&vc4>;
__overlay__ {
status = "okay";
};
--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
@@ -53,20 +53,13 @@
};
fragment@6 {
- target = <&cprman>;
- __overlay__ {
- status = "okay";
- };
- };
-
- fragment@7 {
target = <&fb>;
__overlay__ {
status = "disabled";
};
};
- fragment@8 {
+ fragment@7 {
target = <&pixelvalve0>;
__overlay__ {
interrupts = <2 13>; /* pwa0 */
@@ -74,7 +67,7 @@
};
};
- fragment@9 {
+ fragment@8 {
target = <&pixelvalve1>;
__overlay__ {
interrupts = <2 14>; /* pwa1 */
@@ -82,7 +75,7 @@
};
};
- fragment@10 {
+ fragment@9 {
target = <&pixelvalve2>;
__overlay__ {
interrupts = <2 10>; /* pixelvalve */
@@ -90,7 +83,7 @@
};
};
- fragment@11 {
+ fragment@10 {
target = <&hvs>;
__overlay__ {
interrupts = <2 1>;
@@ -98,7 +91,7 @@
};
};
- fragment@12 {
+ fragment@11 {
target = <&hdmi>;
__overlay__ {
interrupts = <2 8>, <2 9>;
@@ -106,7 +99,7 @@
};
};
- fragment@13 {
+ fragment@12 {
target = <&v3d>;
__overlay__ {
interrupts = <1 10>;
@@ -114,14 +107,14 @@
};
};
- fragment@14 {
- target = <&gpu>;
+ fragment@13 {
+ target = <&vc4>;
__overlay__ {
status = "okay";
};
};
- fragment@15 {
+ fragment@14 {
target-path = "/soc/dma";
__overlay__ {
brcm,dma-channel-mask = <0x7f35>;
@@ -129,7 +122,7 @@
};
- fragment@16 {
+ fragment@15 {
target = <&clocks>;
__overlay__ {
claim-clocks = <
@@ -141,7 +134,7 @@
};
};
- fragment@17 {
+ fragment@16 {
target = <&vec>;
__overlay__ {
status = "okay";