openwrt/target/linux/gemini/Makefile

#
# Copyright (C) 2009-2018 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk

ARCH:=arm
BOARD:=gemini
BOARDNAME:=Cortina Systems CS351x
FEATURES:=squashfs pci rtc usb dt gpio display ext4 rootfs-part boot-part
CPU_TYPE:=fa526

KERNEL_PATCHVER:=5.4

define Target/Description
	Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU
endef

KERNELNAME:=zImage dtbs

include $(INCLUDE_DIR)/target.mk

DEFAULT_PACKAGES += \
	kmod-usb-fotg210 \
	kmod-usb-ledtrig-usbport \
	kmod-leds-gpio kmod-ledtrig-heartbeat \
	kmod-gpio-button-hotplug

$(eval $(call BuildTarget))
add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00			`#`
gemini: switch to 4.14 This introduces Device/ infrastructure and images for all boards available upstream. Changes from Linus submitted version: - fix Raidsonic image generation - remove redundant (old) image generation - remove redundant header tool for dns313 board Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv> 2018-04-29 16:07:05 +00:00			`# Copyright (C) 2009-2018 OpenWrt.org`
add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00			`#`
			`# This is free software, licensed under the GNU General Public License v2.`
			`# See /LICENSE for more information.`
			`#`
			`include $(TOPDIR)/rules.mk`

			`ARCH:=arm`
			`BOARD:=gemini`
			`BOARDNAME:=Cortina Systems CS351x`
gemini: Generate harddisk image for DNS-313 This makes OpenWrt build an Ext2+Ext4 partitioned image for the D-Link DNS-313 with two blank partitions, a boot partition on /dev/sda3 and a rootfs partition on /dev/sda4. This uses the methods already used in apm821xx including the tricks to convert the generated Ext2 filesystem partition to version 1 so that the firmware bootloader will properly recognize it. We patch a bit around the build files to make sure we get the rootfs size set and that genext2fs is properly built. Tested on the D-Link DNS-313. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [Fixing and tricksing] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2019-02-15 16:02:23 +00:00			`FEATURES:=squashfs pci rtc usb dt gpio display ext4 rootfs-part boot-part`
build: unify arm target cflags Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38211 2013-09-26 17:53:20 +00:00			`CPU_TYPE:=fa526`
add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00
gemini: Bump kernel to v5.4 The v5.4 kernel already works much better than v4.19 as so many things got upstreamed so let's just bump it to kernel v5.4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2020-03-21 13:05:55 +00:00			`KERNEL_PATCHVER:=5.4`
add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00
gemini: switch to 4.14 This introduces Device/ infrastructure and images for all boards available upstream. Changes from Linus submitted version: - fix Raidsonic image generation - remove redundant (old) image generation - remove redundant header tool for dns313 board Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Roman Yeryomin <roman@advem.lv> 2018-04-29 16:07:05 +00:00			`define Target/Description`
			`Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU`
			`endef`

			`KERNELNAME:=zImage dtbs`
targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049 2013-06-27 19:58:31 +00:00
add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00			`include $(INCLUDE_DIR)/target.mk`

gemini: cleanup kernel config Disable video and input drivers - they are needed only for one board and can be enabled via modules if/when UI will be available. Use LED drivers from packages. Cleanup other things unnecessarily overriding defaults. Signed-off-by: Roman Yeryomin <roman@advem.lv> 2018-05-01 18:23:56 +00:00			`DEFAULT_PACKAGES += \`
treewide: remove kmod-usb-core from DEVICE_PACKAGES This removes _all_ occurrences of kmod-usb-core from DEVICE_PACKAGES and similar variables. This package is pulled as dependency by one of the following packages in any case: - kmod-usb-chipidea - kmod-usb-dwc2 - kmod-usb-ledtrig-usbport - kmod-usb-ohci - kmod-usb2 - kmod-usb2-pci - kmod-usb3 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [remove kmod-usb-core from EnGenius ESR600] Signed-off-by: David Bauer <mail@david-bauer.net> 2019-09-22 10:06:25 +00:00			`kmod-usb-fotg210 \`
gemini: Break out USB to packages This creates a new kernel package for the fotg210 host controller and uses that with the gemini to shrink the kernel. The SQ201 needs the USB2 PCI package as well. The build system required me to make kernel_oldconfig beofore it would build without errors so some minor unrelated Kconfig entries are changed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-10-18 09:30:27 +00:00			`kmod-usb-ledtrig-usbport \`
gemini: Fix kmod-led-trig-heartbeat typo It's kmod-ledtrig-* not kmod-led-trig-*. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [extended subject] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 2019-02-07 19:47:07 +00:00			`kmod-leds-gpio kmod-ledtrig-heartbeat \`
gemini: cleanup kernel config Disable video and input drivers - they are needed only for one board and can be enabled via modules if/when UI will be available. Use LED drivers from packages. Cleanup other things unnecessarily overriding defaults. Signed-off-by: Roman Yeryomin <roman@advem.lv> 2018-05-01 18:23:56 +00:00			`kmod-gpio-button-hotplug`

add preliminary support for the successor of the storm port SVN-Revision: 15772 2009-05-11 18:27:33 +00:00			`$(eval $(call BuildTarget))`