openwrt/target/linux/octeontx/patches-4.14/0001-net-thunderx-add-support-for-rgmii-internal-delay-mo.patch

149 lines
4.9 KiB
Diff
Raw Normal View History

From 69a99101748bb1bdb2730393ef48bc152c4d244a Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 12 Dec 2017 12:49:55 -0800
Subject: [PATCH] net: thunderx: add support for rgmii internal delay modes
The XCV_DLL_CTL is being configured with the assumption that
phy-mode is rgmii-txid (PHY_INTERFACE_MODE_RGMII_TXID) which is not always
the case.
This patch parses the phy-mode property and uses it to configure CXV_DLL_CTL
properly.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 13 +++++++---
drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 +-
drivers/net/ethernet/cavium/thunder/thunder_xcv.c | 31 ++++++++++++++++++-----
3 files changed, 35 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index 5e5c4d7..805c02a 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -55,6 +55,7 @@ struct bgx {
struct pci_dev *pdev;
bool is_dlm;
bool is_rgx;
+ int phy_mode;
};
static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
@@ -841,12 +842,12 @@ static void bgx_poll_for_link(struct work_struct *work)
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
}
-static int phy_interface_mode(u8 lmac_type)
+static int phy_interface_mode(struct bgx *bgx, u8 lmac_type)
{
if (lmac_type == BGX_MODE_QSGMII)
return PHY_INTERFACE_MODE_QSGMII;
if (lmac_type == BGX_MODE_RGMII)
- return PHY_INTERFACE_MODE_RGMII;
+ return bgx->phy_mode;
return PHY_INTERFACE_MODE_SGMII;
}
@@ -912,7 +913,8 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
if (phy_connect_direct(&lmac->netdev, lmac->phydev,
bgx_lmac_handler,
- phy_interface_mode(lmac->lmac_type)))
+ phy_interface_mode(bgx,
+ lmac->lmac_type)))
return -ENODEV;
phy_start_aneg(lmac->phydev);
@@ -1287,6 +1289,8 @@ static int bgx_init_of_phy(struct bgx *bgx)
bgx->lmac[lmac].lmacid = lmac;
phy_np = of_parse_phandle(node, "phy-handle", 0);
+ if (phy_np)
+ bgx->phy_mode = of_get_phy_mode(phy_np);
/* If there is no phy or defective firmware presents
* this cortina phy, for which there is no driver
* support, ignore it.
@@ -1390,7 +1394,6 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
bgx->max_lmac = 1;
bgx->bgx_id = MAX_BGX_PER_CN81XX - 1;
bgx_vnic[bgx->bgx_id] = bgx;
- xcv_init_hw();
}
/* On 81xx all are DLMs and on 83xx there are 3 BGX QLMs and one
@@ -1407,6 +1410,8 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err)
goto err_enable;
+ if (bgx->is_rgx)
+ xcv_init_hw(bgx->phy_mode);
bgx_init_hw(bgx);
/* Enable all LMACs */
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
index 23acdc5..2bba9d1 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
@@ -226,7 +226,7 @@ void bgx_lmac_internal_loopback(int node, int bgx_idx,
void bgx_lmac_get_pfc(int node, int bgx_idx, int lmacid, void *pause);
void bgx_lmac_set_pfc(int node, int bgx_idx, int lmacid, void *pause);
-void xcv_init_hw(void);
+void xcv_init_hw(int phy_mode);
void xcv_setup_link(bool link_up, int link_speed);
u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx);
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_xcv.c b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
index 578c7f8..7e0c4cb 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
@@ -65,7 +65,7 @@ MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, xcv_id_table);
-void xcv_init_hw(void)
+void xcv_init_hw(int phy_mode)
{
u64 cfg;
@@ -81,12 +81,31 @@ void xcv_init_hw(void)
/* Wait for DLL to lock */
msleep(1);
- /* Configure DLL - enable or bypass
- * TX no bypass, RX bypass
- */
+ /* enable/bypass DLL providing MAC based internal TX/RX delays */
cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
- cfg &= ~0xFF03;
- cfg |= CLKRX_BYP;
+ cfg &= ~0xffff00;
+ switch (phy_mode) {
+ /* RX and TX delays are added by the MAC */
+ case PHY_INTERFACE_MODE_RGMII:
+ break;
+ /* internal RX and TX delays provided by the PHY */
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ cfg |= CLKRX_BYP;
+ cfg |= CLKTX_BYP;
+ break;
+ /* internal RX delay provided by the PHY, the MAC
+ * should not add an RX delay in this case
+ */
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ cfg |= CLKRX_BYP;
+ break;
+ /* internal TX delay provided by the PHY, the MAC
+ * should not add an TX delay in this case
+ */
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ cfg |= CLKRX_BYP;
+ break;
+ }
writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
/* Enable compensation controller and force the
--
2.7.4