openwrt/target/linux/bmips/dts/bcm6328-comtrend-ar-5387un.dts

219 lines
3.3 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6328.dtsi"
/ {
model = "Comtrend AR-5387un";
compatible = "comtrend,ar-5387un", "brcm,bcm6328";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
bcm43225-sprom {
compatible = "brcm,bcma-sprom";
pci-bus = <1>;
pci-dev = <0>;
nvmem-cells = <&macaddr_cfe_6a0 1>;
nvmem-cell-names = "mac-address";
brcm,sprom = "brcm/bcm43225-sprom.bin";
brcm,sprom-fixups = <2 0x05bb>,
<65 0x1204>,
<78 0x0303>,
<79 0x0202>,
<80 0xff02>,
<87 0x0315>,
<88 0x0315>,
<96 0x2048>,
<97 0xff11>,
<98 0x1567>,
<99 0xfb24>,
<100 0x3e3c>,
<101 0x4038>,
<102 0xfe7f>,
<103 0x1279>,
<112 0x2048>,
<113 0xff03>,
<114 0x154c>,
<115 0xfb27>,
<116 0x3e3c>,
<117 0x4038>,
<118 0xfe87>,
<119 0x1233>,
<203 0x2226>;
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0 0>;
nvmem-cell-names = "mac-address";
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
compatible = "mac-base";
reg = <0x6a0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@10000 {
compatible = "brcm,bcm963xx-imagetag";
reg = <0x010000 0xfe0000>;
label = "firmware";
};
partition@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led@1 {
reg = <1>;
label = "red:internet";
};
led_power_red: led@4 {
reg = <4>;
label = "red:power";
panic-indicator;
};
led@7 {
reg = <7>;
label = "green:internet";
};
led_power_green: led@8 {
reg = <8>;
label = "green:power";
};
led@11 {
reg = <11>;
active-low;
label = "green:dsl";
};
};
&ohci {
status = "okay";
};
&pcie {
status = "okay";
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio1", "gpio4", "gpio7",
"gpio8", "gpio11";
};
};
&switch0 {
ports {
port@0 {
reg = <0>;
label = "lan1";
phy-handle = <&phy1>;
phy-mode = "mii";
};
port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&phy2>;
phy-mode = "mii";
};
port@2 {
reg = <2>;
label = "lan3";
phy-handle = <&phy3>;
phy-mode = "mii";
};
port@3 {
reg = <3>;
label = "lan4";
phy-handle = <&phy4>;
phy-mode = "mii";
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};