ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-21 06:33:41 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
6b32a5d768
openwrt/target/linux/tegra/image/Makefile

54 lines
1.5 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
#
treewide: update email address of Tomasz Maciej Nowak Replace my o2.pl email address. I'm still available at the old address. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-20 18:46:35 +00:00
# Copyright (C) 2017-2019 Tomasz Maciej Nowak <tmn505@gmail.com>
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/tegra-sdcard
rm -fR $@.boot
mkdir -p $@.boot
$(CP) $(KDIR)/$(KERNEL_NAME) $@.boot
$(if $(DEVICE_DTS),\
tegra: add testing 6.6 kernel Preliminary support. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-29 14:24:09 +00:00
$(foreach dtb,$(DEVICE_DTS),$(CP) $(DEVICE_DTS_DIR)/$(dtb).dtb $@.boot), \
$(CP) $(DEVICE_DTS_DIR)/*.dtb $@.boot)
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
-n '$(DEVICE_TITLE) OpenWrt bootscript' \
tegra: image: remove unnecessary assumptions from bootscript 'bootz' expects gziped kernel image anyway, so hard-code it to zImage, and remove root path from 'load' commands, by default the files are searched in root directory. This will make the bootscript static, so the command which modified it when image was created can now be removed. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2020-11-25 16:10:05 +00:00
-d $(BOOT_SCRIPT) \
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
$@.boot/boot.scr
tegra: pad rootfs to recreate overlay after upgrade The old overlay remained after upgrades and would cause failure on first boot after upgrade, in which no new overlay could be created while old one was unusable. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-15 17:02:06 +00:00
$(CP) $@ $@.rootfs
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE These targets are currently using more or less same SIGNATURE variable which provides unique partition ID/signature, so it makes sense to refactor it out into common IMG_PART_SIGNATURE variable which could be reused by all targets. This is another step in the direction of reproducible OpenWrt images. Signed-off-by: Paul Spooren <mail@aparcar.org> [split into separate commit, renamed to IMG_PART_SIGNATURE] Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-11-04 20:55:23 +00:00
SIGNATURE="$(IMG_PART_SIGNATURE)" \
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
$(SCRIPT_DIR)/gen_image_generic.sh \
$@ \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
tegra: pad rootfs to recreate overlay after upgrade The old overlay remained after upgrades and would cause failure on first boot after upgrade, in which no new overlay could be created while old one was unusable. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-15 17:02:06 +00:00
$(CONFIG_TARGET_ROOTFS_PARTSIZE) $@.rootfs \
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
2048
uboot-tegra: add U-Boot for tegra boards Add U-Boot for NVIDIA Tegra based boards, with the first being CompuLab TrimSlice. This is part of initial support for this board. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:41 +00:00
$(if $(UBOOT),dd if=$(STAGING_DIR_IMAGE)/$(UBOOT).img of=$@ bs=512 skip=1 seek=1 conv=notrunc)
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
endef
uboot-tegra: add U-Boot for tegra boards Add U-Boot for NVIDIA Tegra based boards, with the first being CompuLab TrimSlice. This is part of initial support for this board. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:41 +00:00
DEVICE_VARS += BOOT_SCRIPT UBOOT
treewide: gather DEVICE_VARS into one place Place DEVICE_VARS assignments at the top of the file or above Device/Default to make them easier to find. For ramips, remove redundant values already present in parent file. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-03-10 06:41:09 +00:00
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
define Device/Default
BOOT_SCRIPT := generic-bootscript
tegra: add testing 6.6 kernel Preliminary support. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-29 14:24:09 +00:00
DEVICE_DTS_DIR := $$(DTS_DIR)/nvidia
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
IMAGES := sdcard.img.gz
tegra: pad rootfs to recreate overlay after upgrade The old overlay remained after upgrades and would cause failure on first boot after upgrade, in which no new overlay could be created while old one was unusable. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-15 17:02:06 +00:00
IMAGE/sdcard.img.gz := append-rootfs | pad-extra 128k | tegra-sdcard | gzip | append-metadata
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
KERNEL_NAME := zImage
KERNEL := kernel-bin
PROFILES := Default
endef
tegra: add vendor string to device name for better identification. Also create SUPPORTED_DEVICES string from it which corresponds to dts compatible string. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-05-01 17:43:54 +00:00
define Device/compulab_trimslice
tegra: split up DEVICE_TITLE Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-07-14 08:35:21 +00:00
DEVICE_VENDOR := CompuLab
DEVICE_MODEL := TrimSlice
tegra: add support for CompuLab TrimSlice It is a small form factor computer with rich amount of expansion ports. Some hardware specs and supported features in this commit: CPU: NVIDIA Tegra 2 @ 1GHz RAM: 1GB DDR2-667 Storage: SDHC card slot µSDHC card slot USB to SATA bridge (depends on model) 1MB SPI NOR flash for bootloader (single partition) LAN: RTL8111DL GbE WIFI: RT3070 b/g/n with external antenna (depends on model) RTC: EM3027 (mapped as rtc0; with battery backup) Tegra 2 built-in (mapped as rtc1) Sound: Analog/Digital (TLV320AIC23b; S/PDIF not tested) Connectors: 4x USB 2.0 RS232 (mini serial) HDMI DVI-D (depends on model, not supported atm) Extension connector (24 pin ZIF, 0.5mm pitch): 2X UART SPI JTAG (1.8V) Other: power button with green led (not functional for early revisions without programmed PMIC) 2x GPIO configurable green led TrimSlice uses U-Boot placed in NOR flash. Boots Linux from any media connected to USB, SATA or SD card inserted in slot. Can also boot from TFTP. To run OpenWrt one needs to update U-Boot to fairly recent version (the versions, pre-dts/dts provided by CompuLab won't suffice): 1. Boot TrimSlice into Your current linux distro, 2. Download trimslice-spi.img from u-boot-trimslice subdir, 3. Install mtd-utils, 4. Run following commands: flash_erase /dev/mtd0 0 256 nandwrite /dev/mtd0 trimslice-spi.img 5. Poweroff, insert SD card with OpenWrt, boot and enjoy. If by some obstacle You can't follow those instructions, it is possible to flash U-Boot using serial console. 1. Insert FAT or EXT2/EXT3 formatted SD card with trimslice-spi.img, 2. Interrupt boot process to enter U-Boot command line, 3. Run following commands: ${fs}load mmc 0 0x04080000 trimslice-spi.img sf probe 0 sf erase 0 0x100000 sf write 0x04080000 0x0 ${filesize} reset 4. Poweroff, insert SD card with OpenWrt, boot and enjoy. If something went wrong with one of above steps, there is simple recovery option: 1. Open the µSD slot security door to access the recovery-boot button, 2. Insert SD card with OpenWrt to the front slot while unpowered, 3. Power on the TrimSlice while pressing the recovery-boot button, 4. With this it should boot straigth to OpenWrt, from there download trimslice-spi.img and execute following commands: mtd erase /dev/mtd0 mtd write trimslice-spi.img /dev/mtd0 5. Reboot, now it should boot straigth to OpenWrt, without pressing the recovery-boot button, with proper U-Boot flashed. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:43 +00:00
DEVICE_DTS := tegra20-trimslice
tegra: trimslice: enable GPIO LEDs driver LEDs are on all the time since boot, until there's driver to claim them. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-15 17:02:08 +00:00
DEVICE_PACKAGES := kmod-leds-gpio kmod-r8169 kmod-rt2800-usb \
tegra: trimslice: enable USB HID driver Without serial or network access the only option for initial configuration, is a attached display with USB keyboard, but the keyboard driver needs to be installed first. So enable keyboard driver by default to avoid this issue. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-05-15 17:02:09 +00:00
kmod-rtc-em3027 kmod-usb-hid kmod-usb-storage wpad-basic-mbedtls
tegra: add support for CompuLab TrimSlice It is a small form factor computer with rich amount of expansion ports. Some hardware specs and supported features in this commit: CPU: NVIDIA Tegra 2 @ 1GHz RAM: 1GB DDR2-667 Storage: SDHC card slot µSDHC card slot USB to SATA bridge (depends on model) 1MB SPI NOR flash for bootloader (single partition) LAN: RTL8111DL GbE WIFI: RT3070 b/g/n with external antenna (depends on model) RTC: EM3027 (mapped as rtc0; with battery backup) Tegra 2 built-in (mapped as rtc1) Sound: Analog/Digital (TLV320AIC23b; S/PDIF not tested) Connectors: 4x USB 2.0 RS232 (mini serial) HDMI DVI-D (depends on model, not supported atm) Extension connector (24 pin ZIF, 0.5mm pitch): 2X UART SPI JTAG (1.8V) Other: power button with green led (not functional for early revisions without programmed PMIC) 2x GPIO configurable green led TrimSlice uses U-Boot placed in NOR flash. Boots Linux from any media connected to USB, SATA or SD card inserted in slot. Can also boot from TFTP. To run OpenWrt one needs to update U-Boot to fairly recent version (the versions, pre-dts/dts provided by CompuLab won't suffice): 1. Boot TrimSlice into Your current linux distro, 2. Download trimslice-spi.img from u-boot-trimslice subdir, 3. Install mtd-utils, 4. Run following commands: flash_erase /dev/mtd0 0 256 nandwrite /dev/mtd0 trimslice-spi.img 5. Poweroff, insert SD card with OpenWrt, boot and enjoy. If by some obstacle You can't follow those instructions, it is possible to flash U-Boot using serial console. 1. Insert FAT or EXT2/EXT3 formatted SD card with trimslice-spi.img, 2. Interrupt boot process to enter U-Boot command line, 3. Run following commands: ${fs}load mmc 0 0x04080000 trimslice-spi.img sf probe 0 sf erase 0 0x100000 sf write 0x04080000 0x0 ${filesize} reset 4. Poweroff, insert SD card with OpenWrt, boot and enjoy. If something went wrong with one of above steps, there is simple recovery option: 1. Open the µSD slot security door to access the recovery-boot button, 2. Insert SD card with OpenWrt to the front slot while unpowered, 3. Power on the TrimSlice while pressing the recovery-boot button, 4. With this it should boot straigth to OpenWrt, from there download trimslice-spi.img and execute following commands: mtd erase /dev/mtd0 mtd write trimslice-spi.img /dev/mtd0 5. Reboot, now it should boot straigth to OpenWrt, without pressing the recovery-boot button, with proper U-Boot flashed. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:43 +00:00
UBOOT := trimslice-mmc
endef
tegra: add vendor string to device name for better identification. Also create SUPPORTED_DEVICES string from it which corresponds to dts compatible string. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-05-01 17:43:54 +00:00
TARGET_DEVICES += compulab_trimslice
tegra: add support for CompuLab TrimSlice It is a small form factor computer with rich amount of expansion ports. Some hardware specs and supported features in this commit: CPU: NVIDIA Tegra 2 @ 1GHz RAM: 1GB DDR2-667 Storage: SDHC card slot µSDHC card slot USB to SATA bridge (depends on model) 1MB SPI NOR flash for bootloader (single partition) LAN: RTL8111DL GbE WIFI: RT3070 b/g/n with external antenna (depends on model) RTC: EM3027 (mapped as rtc0; with battery backup) Tegra 2 built-in (mapped as rtc1) Sound: Analog/Digital (TLV320AIC23b; S/PDIF not tested) Connectors: 4x USB 2.0 RS232 (mini serial) HDMI DVI-D (depends on model, not supported atm) Extension connector (24 pin ZIF, 0.5mm pitch): 2X UART SPI JTAG (1.8V) Other: power button with green led (not functional for early revisions without programmed PMIC) 2x GPIO configurable green led TrimSlice uses U-Boot placed in NOR flash. Boots Linux from any media connected to USB, SATA or SD card inserted in slot. Can also boot from TFTP. To run OpenWrt one needs to update U-Boot to fairly recent version (the versions, pre-dts/dts provided by CompuLab won't suffice): 1. Boot TrimSlice into Your current linux distro, 2. Download trimslice-spi.img from u-boot-trimslice subdir, 3. Install mtd-utils, 4. Run following commands: flash_erase /dev/mtd0 0 256 nandwrite /dev/mtd0 trimslice-spi.img 5. Poweroff, insert SD card with OpenWrt, boot and enjoy. If by some obstacle You can't follow those instructions, it is possible to flash U-Boot using serial console. 1. Insert FAT or EXT2/EXT3 formatted SD card with trimslice-spi.img, 2. Interrupt boot process to enter U-Boot command line, 3. Run following commands: ${fs}load mmc 0 0x04080000 trimslice-spi.img sf probe 0 sf erase 0 0x100000 sf write 0x04080000 0x0 ${filesize} reset 4. Poweroff, insert SD card with OpenWrt, boot and enjoy. If something went wrong with one of above steps, there is simple recovery option: 1. Open the µSD slot security door to access the recovery-boot button, 2. Insert SD card with OpenWrt to the front slot while unpowered, 3. Power on the TrimSlice while pressing the recovery-boot button, 4. With this it should boot straigth to OpenWrt, from there download trimslice-spi.img and execute following commands: mtd erase /dev/mtd0 mtd write trimslice-spi.img /dev/mtd0 5. Reboot, now it should boot straigth to OpenWrt, without pressing the recovery-boot button, with proper U-Boot flashed. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:43 +00:00
tegra: add new target New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2019-04-01 17:25:38 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink