ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 15:02:32 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
67d998e25d
openwrt/target/linux/ipq40xx/config-5.15

510 lines
13 KiB
Plaintext
Raw Normal View History

ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_ARCH_MSM8960 is not set
# CONFIG_ARCH_MSM8974 is not set
# CONFIG_ARCH_MSM8X60 is not set
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CPUIDLE=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set
# CONFIG_ARM_SMMU is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_AT803X_PHY=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BCH=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
ipq40xx: switch to performance governor by default Doing a simple ping to my device shows this: 64 bytes from 10.0.253.101: icmp_seq=1 ttl=64 time=2.00 ms 64 bytes from 10.0.253.101: icmp_seq=2 ttl=64 time=2.02 ms 64 bytes from 10.0.253.101: icmp_seq=3 ttl=64 time=1.68 ms 64 bytes from 10.0.253.101: icmp_seq=4 ttl=64 time=1.91 ms 64 bytes from 10.0.253.101: icmp_seq=5 ttl=64 time=1.92 ms 64 bytes from 10.0.253.101: icmp_seq=6 ttl=64 time=2.04 ms Some users even report higher values on older kernels: 64 bytes from 192.168.1.10: seq=0 ttl=64 time=0.612 ms 64 bytes from 192.168.1.10: seq=1 ttl=64 time=2.852 ms 64 bytes from 192.168.1.10: seq=2 ttl=64 time=2.719 ms 64 bytes from 192.168.1.10: seq=3 ttl=64 time=2.741 ms 64 bytes from 192.168.1.10: seq=4 ttl=64 time=2.808 ms The problem is that the governor is set to Ondemand, which causes the CPU to clock all the way down to 48MHz in some cases. Switching to performance governor: 64 bytes from 10.0.253.101: icmp_seq=1 ttl=64 time=0.528 ms 64 bytes from 10.0.253.101: icmp_seq=2 ttl=64 time=0.561 ms 64 bytes from 10.0.253.101: icmp_seq=3 ttl=64 time=0.633 ms 64 bytes from 10.0.253.101: icmp_seq=4 ttl=64 time=0.526 ms In theory, using the Performance governor should increase power draw, but it looks like it really does not matter for this soc. Using a calibrated precision DC power supply (cpu idle): Ondemand 24.00V * 0.134A = 3.216 Watts 48.00V * 0.096A = 4.608 Watts Performance 24.00V * 0.135A = 3.240 Watts 48.00V * 0.096A = 4.608 Watts Let's simply switch to the Performance governor by default to fix the general jittery behaviour on devices using this soc. Tested on: MikroTik wAP ac Fixes: #13649 Reviewed-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com> (cherry picked from commit b8e52852bd62236a2a84663b4592d221ebc64cb4)
2023-09-12 13:38:27 +00:00
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_CRC8=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_CRYPTO_AES_ARM=y
CONFIG_CRYPTO_AES_ARM_BS=y
generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM] This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-20 12:49:45 +00:00
CONFIG_CRYPTO_BLAKE2S_ARM=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_QCE=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM] This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-20 12:49:45 +00:00
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_ARM=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_CRYPTO_SHA512=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DEBUG_MISC=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DTC=y
CONFIG_DT_IDLE_STATES=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_FWNODE_MDIO=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
ipq40xx: 5.15: refresh config Refresh 5.15 kernel config for IPQ40xx due to large number of generic config changes. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2022-04-25 11:10:15 +00:00
CONFIG_GENERIC_CPU_VULNERABILITIES=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_GPIO_CDEV=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
ipq40xx: enable ethernet and DSA driver combo Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-11-01 17:30:00 +00:00
CONFIG_GRO_CELLS=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_SMP=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_OPTEE=y
CONFIG_HZ_FIXED=0
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_QCOM_CCI is not set
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
# CONFIG_IPQ_APSS_PLL is not set
CONFIG_IPQ_GCC_4019=y
# CONFIG_IPQ_GCC_6018 is not set
# CONFIG_IPQ_GCC_806X is not set
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_KMAP_LOCAL=y
ipq40xx: 5.15: refresh config Refresh 5.15 kernel config for IPQ40xx due to large number of generic config changes. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2022-04-25 11:10:15 +00:00
CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
# CONFIG_KPSS_XCC is not set
# CONFIG_KRAITCC is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_IPQ4019=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_QCOM_RPM is not set
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MSM_GCC_8660 is not set
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8939 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_GPUCC_8998 is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
# CONFIG_MSM_MMCC_8998 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_QCOM=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
# CONFIG_MTD_QCOMSMEM_PARTS is not set
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SPLIT_WRGG_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
ipq40xx: enable ethernet and DSA driver combo Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-11-01 17:30:00 +00:00
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_QCA8K_IPQ4019=y
CONFIG_NET_DSA_TAG_IPQ4019=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_PTP_CLASSIFY=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_NET_SELFTESTS=y
ipq40xx: enable ethernet and DSA driver combo Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-11-01 17:30:00 +00:00
CONFIG_NET_SWITCHDEV=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_NLS=y
CONFIG_NO_HZ=y
CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_NVMEM=y
treewide: update NVMEM symbols Fixes: 8dfe69cdfc5c ("kernel: update nvmem subsystem to the latest upstream") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2023-01-07 00:28:19 +00:00
CONFIG_NVMEM_QCOM_QFPROM=y
kernel: backport v6.6 nvmem changes Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 52c365f055f62eb820cc42b0a1cfd037c68b01d0)
2023-08-30 22:28:58 +00:00
# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
# CONFIG_NVMEM_SPMI_SDAM is not set
CONFIG_NVMEM_SYSFS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OPTEE=y
CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_QCOM=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
ipq40xx: enable ethernet and DSA driver combo Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-11-01 17:30:00 +00:00
CONFIG_PHYLINK=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_SS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ4019=y
# CONFIG_PINCTRL_IPQ6018 is not set
# CONFIG_PINCTRL_IPQ8064 is not set
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8226 is not set
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8998 is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_QCS404 is not set
# CONFIG_PINCTRL_SC7180 is not set
# CONFIG_PINCTRL_SDM660 is not set
# CONFIG_PINCTRL_SDM845 is not set
# CONFIG_PINCTRL_SM8150 is not set
# CONFIG_PINCTRL_SM8250 is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
ipq40xx: Enable gpio-restart in kernel configuration Some ZTE devices require the gpio-restart driver to support restarting the LTE modem along with OpenWrt Signed-off-by: Andreas Böhler <dev@aboehler.at> (cherry picked from commit 9ffdaa7fa1478146b5d8c77d4b3a5d4d4007a487)
2023-05-14 14:39:15 +00:00
CONFIG_POWER_RESET_GPIO_RESTART=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PTP_1588_CLOCK=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_QCA807X_PHY=y
CONFIG_QCOM_A53PLL=y
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
# CONFIG_QCOM_ADM is not set
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_QCOM_BAM_DMA=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_CPR is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_HFPLL is not set
# CONFIG_QCOM_IOMMU is not set
ipq40xx: enable ethernet and DSA driver combo Select the Ethernet driver, DSA tag driver and the DSA driver itself to be built in the kernel config. They automatically pull in switchdev and phylink. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2021-11-01 17:30:00 +00:00
CONFIG_QCOM_IPQ4019_ESS_EDMA=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_PDC is not set
# CONFIG_QCOM_RMTFS_MEM is not set
# CONFIG_QCOM_RPMH is not set
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
# CONFIG_QCOM_SOCINFO is not set
CONFIG_QCOM_TCSR=y
# CONFIG_QCOM_TSENS is not set
CONFIG_QCOM_WDT=y
# CONFIG_QCS_GCC_404 is not set
# CONFIG_QCS_Q6SSTOP_404 is not set
# CONFIG_QCS_TURING_404 is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_VQMMC_IPQ4019=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_SC_DISPCC_7180 is not set
# CONFIG_SC_GCC_7180 is not set
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_MSS_7180 is not set
# CONFIG_SC_VIDEOCC_7180 is not set
# CONFIG_SDM_CAMCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_660 is not set
# CONFIG_SDM_GCC_845 is not set
# CONFIG_SDM_GPUCC_845 is not set
# CONFIG_SDM_LPASSCC_845 is not set
# CONFIG_SDM_VIDEOCC_845 is not set
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
# CONFIG_SM_GCC_8150 is not set
# CONFIG_SM_GCC_8250 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
# CONFIG_SM_VIDEOCC_8150 is not set
# CONFIG_SM_VIDEOCC_8250 is not set
ipq40xx: 5:15: refresh config Refresh config for kernel 5.15 using make kernel_menuconfig Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:07:21 +00:00
CONFIG_SOCK_RX_QUEUE_MAPPING=y
ipq40xx: 5:15: copy config and patch from 5.10 Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-11-20 22:05:02 +00:00
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_TEE=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XXHASH=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
Reference in New Issue Copy Permalink