openwrt/target/linux/ipq806x/patches-5.4/997-device_tree_cmdline.patch

--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
 	if (p != NULL && l > 0)
 		strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+	p = of_get_flat_dt_prop(node, "bootargs-append", &l);
+	if (p != NULL && l > 0)
+		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
 
     /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
      * device tree option of chosen/bootargs-override. This is
kernel: bump 5.4 to 5.4.66 All modifications made by update_kernel.sh/no manual intervention needed Run-tested: ipq806x (R7800), ath79 (Archer C7v5), x86/64 No dmesg regressions, everything appears functional Signed-off-by: John Audia <graysky@archlinux.us> [add run test from PR] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-09-17 13:51:25 +00:00			`--- a/drivers/of/fdt.c`
			`+++ b/drivers/of/fdt.c`
ipq806x: import bootargs-append from IPQ40xx This imports the patch that adds bootargs-append support from IPQ40xx. This way we can append additional boot arguments from DTS instead of only being able to overwrite them. This way dual firmware devices can use the rootfs number that bootloader passes to decide from what to boot. But we still need to append console info and ubi root info. This is used by Edgecore ECW5410. Signed-off-by: Robert Marko <robert.marko@sartura.hr> 2020-05-18 10:35:15 +00:00			`@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns`
			`p = of_get_flat_dt_prop(node, "bootargs", &l);`
			`if (p != NULL && l > 0)`
			`strlcpy(data, p, min(l, COMMAND_LINE_SIZE));`
			`+ p = of_get_flat_dt_prop(node, "bootargs-append", &l);`
			`+ if (p != NULL && l > 0)`
			`+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));`

ipq806x: add support for ASRock G10 The ASRock G10 is a 2.4/5 GHz band 11ac "Gaming" router, based on Qualcomm IPQ8064. Specifications: SoC: Qualcomm IPQ8064 CPU: Dual-Core A15 @ (384 - 1,400 MHz, 2C2T) DRAM: 512 MiB (~467 MiB available) NAND: 128 MB (Micron MT29F1G08ABBEAH4) WLAN0: 4T4R 5 GHz Wlan (QCA9980) WLAN1: 4T4R 2.4 GHz Wlan (QCA9980) ETH: 5x 10/100/1000 Mbps Ethernet (QCA8337) INPUT: Reset Button, WPS 2.4G and WPS 5G Button LEDS: 1 multicolor status LED USB: 2x USB 3.0 Type-A POWER: 12VDC/3A AC Adapter + dedicated Power Switch UART: Setting is 115200-8-N-1. 1x4 .1" unpopulated header on the PCB (J6 - very tiny silkscreen next to TX). Pinout: 1. 3v3 (Square - best skipped!), 2. RX, 3. GND, 4. TX WARNING: The serial port needs a TTL/RS-232 3.3v level converter! (Depending on the serial adapter RX and TX might need to be swapped). Note about the IR-Remote: There's a 8-Bit MCU (SONIX SN8F25E21SG) which is controlling the IR-Remote and is fed by the IR-Photodiode. The SoC can talk to the device via I2C. The vendor's GPL archive comes with the source of the interface driver for this as a (character driver), the main control software is however a blob. Installation Instructions: 1. Download factory image to disk 2. Apply factory image via stock web-gui Back to stock: 1. Login to router via ssh 2. run "asrock_g10_back_to_factory" script from /sbin Notes: - If something goes wrong durring sysupgrade, router will go back to factory image. - Asrock G10 uses partition layout from smem. So partition layout can be normal or alternate. - 900-arm-add-cmdline-override.patch was copied from 102-powerpc-add-cmdline-override.patch from powerpc target. Knowledge about BOOTCONFIG partition was based on user "jmomo" post from old OpenWrt forum (Post #50): https://forum.archive.openwrt.org/viewtopic.php?id=65956&p=2 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [bump to 5.4, add factory image, fix sysupgrade, convert partition layout to smem, remove ipq-wifi-asrock-g10 and use ART, minor fixes] Co-Authored-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Lukasz Ostapiuk <palibrzuch@gmail.com> 2019-10-11 22:49:15 +00:00			`/* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different`
			`* device tree option of chosen/bootargs-override. This is`