mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
105 lines
3.9 KiB
Diff
105 lines
3.9 KiB
Diff
|
From 8a6b7be03aaf91419a6dbc91dba10cf6e7f6eb73 Mon Sep 17 00:00:00 2001
|
||
|
|
From: Jonathan Bell <jonathan@raspberrypi.org>
|
||
|
|
Date: Tue, 11 Jun 2019 10:55:00 +0100
|
||
|
|
Subject: [PATCH 660/703] usb: add plumbing for updating interrupt endpoint
|
||
|
|
interval state
|
||
|
|
|
||
|
|
xHCI caches device and endpoint data after the interface is configured,
|
||
|
|
so an explicit command needs to be issued for any device driver wanting
|
||
|
|
to alter the polling interval of an endpoint.
|
||
|
|
|
||
|
|
Add usb_fixup_endpoint() to allow drivers to do this. The fixup must be
|
||
|
|
called after calculating endpoint bandwidth requirements but before any
|
||
|
|
URBs are submitted.
|
||
|
|
|
||
|
|
If polling intervals are shortened, any bandwidth reservations are no
|
||
|
|
longer valid but in practice polling intervals are only ever relaxed.
|
||
|
|
|
||
|
|
Limit the scope to interrupt transfers for now.
|
||
|
|
|
||
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
|
||
|
|
---
|
||
|
|
drivers/usb/core/hcd.c | 10 ++++++++++
|
||
|
|
drivers/usb/core/message.c | 15 +++++++++++++++
|
||
|
|
include/linux/usb.h | 2 ++
|
||
|
|
include/linux/usb/hcd.h | 7 +++++++
|
||
|
|
4 files changed, 34 insertions(+)
|
||
|
|
|
||
|
|
--- a/drivers/usb/core/hcd.c
|
||
|
|
+++ b/drivers/usb/core/hcd.c
|
||
|
|
@@ -2071,6 +2071,16 @@ reset:
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
+void usb_hcd_fixup_endpoint(struct usb_device *udev,
|
||
|
|
+ struct usb_host_endpoint *ep, int interval)
|
||
|
|
+{
|
||
|
|
+ struct usb_hcd *hcd;
|
||
|
|
+
|
||
|
|
+ hcd = bus_to_hcd(udev->bus);
|
||
|
|
+ if (hcd->driver->fixup_endpoint)
|
||
|
|
+ hcd->driver->fixup_endpoint(hcd, udev, ep, interval);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
/* Disables the endpoint: synchronizes with the hcd to make sure all
|
||
|
|
* endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
|
||
|
|
* have been called previously. Use for set_configuration, set_interface,
|
||
|
|
--- a/drivers/usb/core/message.c
|
||
|
|
+++ b/drivers/usb/core/message.c
|
||
|
|
@@ -1113,6 +1113,21 @@ static void remove_intf_ep_devs(struct u
|
||
|
|
intf->ep_devs_created = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
+void usb_fixup_endpoint(struct usb_device *dev, int epaddr, int interval)
|
||
|
|
+{
|
||
|
|
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
|
||
|
|
+ struct usb_host_endpoint *ep;
|
||
|
|
+
|
||
|
|
+ if (usb_endpoint_out(epaddr))
|
||
|
|
+ ep = dev->ep_out[epnum];
|
||
|
|
+ else
|
||
|
|
+ ep = dev->ep_in[epnum];
|
||
|
|
+
|
||
|
|
+ if (ep && usb_endpoint_xfer_int(&ep->desc))
|
||
|
|
+ usb_hcd_fixup_endpoint(dev, ep, interval);
|
||
|
|
+}
|
||
|
|
+EXPORT_SYMBOL_GPL(usb_fixup_endpoint);
|
||
|
|
+
|
||
|
|
/**
|
||
|
|
* usb_disable_endpoint -- Disable an endpoint by address
|
||
|
|
* @dev: the device whose endpoint is being disabled
|
||
|
|
--- a/include/linux/usb.h
|
||
|
|
+++ b/include/linux/usb.h
|
||
|
|
@@ -1809,6 +1809,8 @@ extern int usb_clear_halt(struct usb_dev
|
||
|
|
extern int usb_reset_configuration(struct usb_device *dev);
|
||
|
|
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
|
||
|
|
extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
|
||
|
|
+extern void usb_fixup_endpoint(struct usb_device *dev, int epaddr,
|
||
|
|
+ int interval);
|
||
|
|
|
||
|
|
/* this request isn't really synchronous, but it belongs with the others */
|
||
|
|
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
|
||
|
|
--- a/include/linux/usb/hcd.h
|
||
|
|
+++ b/include/linux/usb/hcd.h
|
||
|
|
@@ -379,6 +379,11 @@ struct hc_driver {
|
||
|
|
* or bandwidth constraints.
|
||
|
|
*/
|
||
|
|
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
|
||
|
|
+ /* Override the endpoint-derived interval
|
||
|
|
+ * (if there is any cached hardware state).
|
||
|
|
+ */
|
||
|
|
+ void (*fixup_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
|
||
|
|
+ struct usb_host_endpoint *ep, int interval);
|
||
|
|
/* Returns the hardware-chosen device address */
|
||
|
|
int (*address_device)(struct usb_hcd *, struct usb_device *udev);
|
||
|
|
/* prepares the hardware to send commands to the device */
|
||
|
|
@@ -435,6 +440,8 @@ extern void usb_hcd_unmap_urb_setup_for_
|
||
|
|
extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
|
||
|
|
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
|
||
|
|
struct usb_host_endpoint *ep);
|
||
|
|
+extern void usb_hcd_fixup_endpoint(struct usb_device *udev,
|
||
|
|
+ struct usb_host_endpoint *ep, int interval);
|
||
|
|
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
|
||
|
|
struct usb_host_endpoint *ep);
|
||
|
|
extern void usb_hcd_reset_endpoint(struct usb_device *udev,
|