openwrt/target/linux/mpc85xx/image/Makefile

# SPDX-License-Identifier: GPL-2.0-only

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk

define Build/copy-file
	cat "$(1)" > "$@"
endef

define Device/Default
  PROFILES := Default
  DEVICE_DTS := $(lastword $(subst _, ,$(1)))
  KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  KERNEL_ENTRY := 0x00000000
  KERNEL_LOADADDR := 0x00000000
  KERNEL := kernel-bin
endef

include $(SUBTARGET).mk

$(eval $(call BuildImage))
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2021-02-10 13:52:34 +00:00			`# SPDX-License-Identifier: GPL-2.0-only`

preliminary support for Freescale MPC85xx based boards SVN-Revision: 24259 2010-12-05 11:38:59 +00:00			`include $(TOPDIR)/rules.mk`
			`include $(INCLUDE_DIR)/image.mk`

mpc85xx: Fix Aerohive HiveAP-330 initramfs image At some point our initramfs image grew over 6MB, which is causing an issue when uncompressing in the stock bootloader: => bootm 0x5000000 - 0x1000000; Image Name: Linux-4.19.24 Created: 2019-02-23 1:58:20 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 6752470 Bytes = 6.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Booting using the fdt blob at 0x1000000 Uncompressing Kernel Image ... Error: inflate() returned -5 GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover Loading Device Tree to 00ffa000, end 00fffc78 ... OK To get around this, we need to move to an uncompressed image for the initramfs image. While this makes a larger image, it is thankfully bootable so people can then convert their devices to run OpenWRT. It's worth noting the non-initramfs image is under 3M, so it will be ages before we have any issues with the flashed kernel. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [keep commit message at less than 75 characters per line] 2019-03-02 02:03:32 +00:00			`define Build/copy-file`
			`cat "$(1)" > "$@"`
			`endef`

mpc85xx: use new build code style The following moves the mpc85xx target (generic & P1020) to the new build code style. Compile & Flash tested on an Aerohive HiveAP-330. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-10-20 17:36:25 +00:00			`define Device/Default`
			`PROFILES := Default`
mpc85xx: add vendor to Makefile node name, derive SUPPORTED_DEVICES By adding the vendor to the Makefile device definition node name, one can derive the standard compatible used in SUPPORTED_DEVICES instead of having to specify it manually. Despite, this moves the naming scheme closer to what is used for other targets (ath79, ramips). Build-tested on all subtargets. Run-tested on TP-Link TL-WDR4900 v1. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2019-11-23 17:20:34 +00:00			`DEVICE_DTS := $(lastword $(subst _, ,$(1)))`
mpc85xx: use new build code style The following moves the mpc85xx target (generic & P1020) to the new build code style. Compile & Flash tested on an Aerohive HiveAP-330. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-10-20 17:36:25 +00:00			`KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)`
			`KERNEL_ENTRY := 0x00000000`
			`KERNEL_LOADADDR := 0x00000000`
			`KERNEL := kernel-bin`
mpc85xx: add profile and build image for the TL-WDR4900 v1 board Now that the ethernet switch is working, create firmware images to make impatient users happy. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36051 2013-03-15 16:11:45 +00:00			`endef`

mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net> 2020-05-18 19:10:45 +00:00			`include $(SUBTARGET).mk`
mpc85xx: add support for Freescale (NXP) P2020RDB This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches] 2018-12-30 07:38:45 +00:00
preliminary support for Freescale MPC85xx based boards SVN-Revision: 24259 2010-12-05 11:38:59 +00:00			`$(eval $(call BuildImage))`