openwrt/target/linux/generic/hack-6.6/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch

From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Tue, 27 Aug 2019 15:16:56 +0300
Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412

Adds support for AQR112 and AQR412 which is mostly based on existing code
with the addition of code configuring the protocol on system side.
This allows changing the system side protocol without having to deploy a
different firmware on the PHY.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -96,6 +96,29 @@
 #define AQR107_OP_IN_PROG_SLEEP		1000
 #define AQR107_OP_IN_PROG_TIMEOUT	100000
 
+/* registers in MDIO_MMD_VEND1 region */
+#define AQUANTIA_VND1_GLOBAL_SC			0x000
+#define  AQUANTIA_VND1_GLOBAL_SC_LP		BIT(0xb)
+
+/* global start rate, the protocol associated with this speed is used by default
+ * on SI.
+ */
+#define AQUANTIA_VND1_GSTART_RATE		0x31a
+#define  AQUANTIA_VND1_GSTART_RATE_OFF		0
+#define  AQUANTIA_VND1_GSTART_RATE_100M		1
+#define  AQUANTIA_VND1_GSTART_RATE_1G		2
+#define  AQUANTIA_VND1_GSTART_RATE_10G		3
+#define  AQUANTIA_VND1_GSTART_RATE_2_5G		4
+#define  AQUANTIA_VND1_GSTART_RATE_5G		5
+
+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
+#define AQUANTIA_VND1_GSYSCFG_BASE		0x31b
+#define AQUANTIA_VND1_GSYSCFG_100M		0
+#define AQUANTIA_VND1_GSYSCFG_1G		1
+#define AQUANTIA_VND1_GSYSCFG_2_5G		2
+#define AQUANTIA_VND1_GSYSCFG_5G		3
+#define AQUANTIA_VND1_GSYSCFG_10G		4
+
 static int aqr107_get_sset_count(struct phy_device *phydev)
 {
 	return AQR107_SGMII_STAT_SZ;
@@ -202,6 +225,51 @@ static int aqr_config_aneg(struct phy_de
 	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
+static struct {
+	u16 syscfg;
+	int cnt;
+	u16 start_rate;
+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
+	[PHY_INTERFACE_MODE_SGMII] =      {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
+					   AQUANTIA_VND1_GSTART_RATE_1G},
+	[PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
+					   AQUANTIA_VND1_GSTART_RATE_2_5G},
+	[PHY_INTERFACE_MODE_XGMII] =      {0x100, AQUANTIA_VND1_GSYSCFG_10G,
+					   AQUANTIA_VND1_GSTART_RATE_10G},
+	[PHY_INTERFACE_MODE_USXGMII] =    {0x080, AQUANTIA_VND1_GSYSCFG_10G,
+					   AQUANTIA_VND1_GSTART_RATE_10G},
+};
+
+/* Sets up protocol on system side before calling aqr_config_aneg */
+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
+{
+	int if_type = phydev->interface;
+	int i;
+
+	if (!aquantia_syscfg[if_type].cnt)
+		return 0;
+
+	/* set PHY in low power mode so we can configure protocols */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
+		      AQUANTIA_VND1_GLOBAL_SC_LP);
+	mdelay(10);
+
+	/* set the default rate to enable the SI link */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
+		      aquantia_syscfg[if_type].start_rate);
+
+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
+		phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			      AQUANTIA_VND1_GSYSCFG_BASE + i,
+			      aquantia_syscfg[if_type].syscfg);
+
+	/* wake PHY back up */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
+	mdelay(10);
+
+	return aqr_config_aneg(phydev);
+}
+
 static int aqr_config_intr(struct phy_device *phydev)
 {
 	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
@@ -854,7 +922,7 @@ static struct phy_driver aqr_driver[] =
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
 	.name		= "Aquantia AQR112",
 	.probe		= aqr107_probe,
-	.config_aneg    = aqr_config_aneg,
+	.config_aneg    = aqr_config_aneg_set_prot,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
 	.get_tunable    = aqr107_get_tunable,
@@ -877,7 +945,7 @@ static struct phy_driver aqr_driver[] =
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
 	.name		= "Aquantia AQR412",
 	.probe		= aqr107_probe,
-	.config_aneg    = aqr_config_aneg,
+	.config_aneg    = aqr_config_aneg_set_prot,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
 	.get_tunable    = aqr107_get_tunable,