ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 17:01:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
63f6408ccc
openwrt/target/linux/layerscape/image/Makefile

124 lines
4.1 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/append-ls-rcw
rm -f $@
dd if=$(KDIR)/$(1)-rcw.bin >> $@
endef
define Build/append-ls-uboot
dd if=$(KDIR)/$(1)-$(SUBTARGET)-uboot.bin >> $@
endef
define Build/append-ls-fman
dd if=$(KDIR)/$(1)-fman.bin >> $@
endef
define Build/append-ls-dtb
$(call Image/BuildDTB,$(DTS_DIR)/$(1).dts,$(DTS_DIR)/$(1).dtb)
dd if=$(DTS_DIR)/$(1).dtb >> $@
endef
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
define Build/append-ls-rootfs-ext4
$(STAGING_DIR_HOST)/bin/make_ext4fs -l $(word 2,$(1)) -b 4096 -i 6000 -m 0 -J $(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 $(TARGET_DIR)
dd if=$(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 >> $@
endef
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
define Device/Default
PROFILES = Default
FILESYSTEMS := squashfs
KERNEL := kernel-bin | gzip | uImage gzip
DEVICE_DTS :=
IMAGES = firmware.bin
ifeq ($(SUBTARGET),64b)
KERNEL_LOADADDR = 0x80080000
KERNEL_ENTRY_POINT = 0x80080000
endif
ifeq ($(SUBTARGET),32b)
KERNEL_LOADADDR = 0x80008000
KERNEL_ENTRY_POINT = 0x80008000
endif
endef
define Device/ls1043ardb
DEVICE_TITLE := ls1043ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls1043ardb uboot-layerscape-$(SUBTARGET)-ls1043ardb fman-layerscape-ls1043ardb
ifeq ($(SUBTARGET),64b)
DEVICE_DTS = freescale/fsl-ls1043a-rdb
endif
ifeq ($(SUBTARGET),32b)
DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1043a-rdb
endif
IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
append-ls-fman $(1) | pad-to 4M | append-ls-dtb $$(DEVICE_DTS) | pad-to 5M | \
layerscape: ls1043ardb: add pad-rootfs to reduce the size of firmware.bin Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-11-09 15:51:48 +00:00
append-kernel | pad-to 10M | append-rootfs | pad-rootfs | check-size 67108865
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
TARGET_DEVICES += ls1043ardb
layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
define Device/ls1046ardb
DEVICE_TITLE := ls1046ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls1046ardb uboot-layerscape-$(SUBTARGET)-ls1046ardb fman-layerscape-ls1046ardb
ifeq ($(SUBTARGET),64b)
DEVICE_DTS = freescale/fsl-ls1046a-rdb
endif
ifeq ($(SUBTARGET),32b)
DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1046a-rdb
endif
IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
append-ls-fman $(1) | pad-to 4M | append-ls-dtb $$(DEVICE_DTS) | pad-to 5M | \
append-kernel | pad-to 10M | append-ls-rootfs-ext4 $(1) 22M | check-size 33554433
endef
TARGET_DEVICES += ls1046ardb
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
define Device/ls1012ardb
DEVICE_TITLE := ls1012ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb kmod-ppfe ppfe-ls1012ardb
ifeq ($(SUBTARGET),64b)
DEVICE_DTS = freescale/fsl-ls1012a-rdb
endif
ifeq ($(SUBTARGET),32b)
DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1012a-rdb
endif
IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
append-ls-dtb $$(DEVICE_DTS) | pad-to 4M | append-kernel | pad-to 9M | \
append-ls-rootfs-ext4 $(1) 23M | check-size 33554433
endef
TARGET_DEVICES += ls1012ardb
layerscape: add ls1088ardb device support LS1088A is an ARMv8 implementation combining eight ARM A53 processor cores. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. Features summary: - Eight 64-bit ARM v8 Cortex-A53 CPUs - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces - QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-23 17:11:32 +00:00
define Device/ls1088ardb
DEVICE_TITLE := ls1088ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls1088ardb uboot-layerscape-$(SUBTARGET)-ls1088ardb mc-binary-ls1088ardb
ifeq ($(SUBTARGET),64b)
DEVICE_DTS = freescale/fsl-ls1088a-rdb
endif
ifeq ($(SUBTARGET),32b)
DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1088a-rdb
endif
IMAGE/firmware.bin = append-ls-dtb $$(DEVICE_DTS) | pad-to 1M | append-kernel | pad-to 6M | \
append-ls-rootfs-ext4 $(1) 17M | check-size 24117249
endef
TARGET_DEVICES += ls1088ardb
layerscape: add ls2088ardb device support The QorIQ LS2088A processor is built on the Layerscape architecture combining eight ARM A72 processor cores with advanced, high-performance datapath acceleration and network, peripheral interfaces required for networking, telecom, wireless infrastructure, aerospace applications and general-purpose embedded applications. Features summary: - Eight 64-bit ARM v8 Cortex-A72 CPUs - Two 64-bit DDR4 SDRAM memory controller with ECC - One 32-bit DDR3 SDRAM memory controller with ECC - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces - IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-27 17:28:02 +00:00
define Device/ls2088ardb
DEVICE_TITLE := ls2088ardb-$(SUBTARGET)
DEVICE_PACKAGES += rcw-layerscape-ls2088ardb uboot-layerscape-$(SUBTARGET)-ls2088ardb mc-binary-ls2088ardb
ifeq ($(SUBTARGET),64b)
DEVICE_DTS = freescale/fsl-ls2088a-rdb
endif
ifeq ($(SUBTARGET),32b)
DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls2088a-rdb
endif
IMAGE/firmware.bin = append-ls-dtb $$(DEVICE_DTS) | pad-to 1M | append-kernel | pad-to 6M | \
append-rootfs | pad-rootfs | check-size 24117249
endef
TARGET_DEVICES += ls2088ardb
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink