mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
755 lines
16 KiB
Diff
755 lines
16 KiB
Diff
|
From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
|
||
|
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
||
|
Date: Tue, 7 Mar 2023 22:32:40 -0800
|
||
|
Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
|
||
|
|
||
|
FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
|
||
|
|
||
|
Board Specifications
|
||
|
- Rockchip RK3568
|
||
|
- 2 or 4GB LPDDR4X
|
||
|
- 8GB or 16GB eMMC, SD card slot
|
||
|
- GbE LAN (Native)
|
||
|
- 2x 2.5G LAN (PCIe)
|
||
|
- M.2 Connector
|
||
|
- HDMI 2.0, MIPI DSI/CSI
|
||
|
- 2xUSB 3.0 Host
|
||
|
- USB Type C PD, 5V/9V/12V
|
||
|
- GPIO: 12-pin 0.5mm FPC connector
|
||
|
|
||
|
Based on Tianling Shen's <cnsztl@gmail.com> work.
|
||
|
|
||
|
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
||
|
Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
|
||
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||
|
---
|
||
|
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
||
|
.../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 713 ++++++++++++++++++
|
||
|
2 files changed, 714 insertions(+)
|
||
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
||
|
|
||
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||
|
@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
|
||
|
@@ -0,0 +1,713 @@
|
||
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||
|
+/*
|
||
|
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
|
||
|
+ * (http://www.friendlyelec.com)
|
||
|
+ *
|
||
|
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include <dt-bindings/gpio/gpio.h>
|
||
|
+#include <dt-bindings/input/input.h>
|
||
|
+#include <dt-bindings/leds/common.h>
|
||
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||
|
+#include "rk3568.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "FriendlyElec NanoPi R5S";
|
||
|
+ compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
|
||
|
+
|
||
|
+ aliases {
|
||
|
+ ethernet0 = &gmac0;
|
||
|
+ mmc0 = &sdmmc0;
|
||
|
+ mmc1 = &sdhci;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen: chosen {
|
||
|
+ stdout-path = "serial2:1500000n8";
|
||
|
+ };
|
||
|
+
|
||
|
+ hdmi-con {
|
||
|
+ compatible = "hdmi-connector";
|
||
|
+ type = "a";
|
||
|
+
|
||
|
+ port {
|
||
|
+ hdmi_con_in: endpoint {
|
||
|
+ remote-endpoint = <&hdmi_out_con>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio-leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
|
||
|
+
|
||
|
+ led-lan1 {
|
||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||
|
+ function = LED_FUNCTION_LAN;
|
||
|
+ function-enumerator = <1>;
|
||
|
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||
|
+ };
|
||
|
+
|
||
|
+ led-lan2 {
|
||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||
|
+ function = LED_FUNCTION_LAN;
|
||
|
+ function-enumerator = <2>;
|
||
|
+ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
|
||
|
+ };
|
||
|
+
|
||
|
+ power_led: led-power {
|
||
|
+ color = <LED_COLOR_ID_RED>;
|
||
|
+ function = LED_FUNCTION_POWER;
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||
|
+ };
|
||
|
+
|
||
|
+ led-wan {
|
||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||
|
+ function = LED_FUNCTION_WAN;
|
||
|
+ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_usbc: vdd-usbc-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vdd_usbc";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_sys: vcc3v3-sys-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc3v3_sys";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ vin-supply = <&vdd_usbc>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_sys";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ vin-supply = <&vdd_usbc>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc3v3_pcie";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ enable-active-high;
|
||
|
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||
|
+ startup-delay-us = <200000>;
|
||
|
+ vin-supply = <&vcc5v0_sys>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_usb: vcc5v0-usb-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_usb";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ vin-supply = <&vdd_usbc>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||
|
+ regulator-name = "vcc5v0_usb_host";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ vin-supply = <&vcc5v0_usb>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||
|
+ regulator-name = "vcc5v0_usb_otg";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ vin-supply = <&vcc5v0_usb>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "pcie30_avdd0v9";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+ vin-supply = <&vcc3v3_sys>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "pcie30_avdd1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ vin-supply = <&vcc3v3_sys>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&combphy0 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&combphy1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&combphy2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&cpu0 {
|
||
|
+ cpu-supply = <&vdd_cpu>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu1 {
|
||
|
+ cpu-supply = <&vdd_cpu>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu2 {
|
||
|
+ cpu-supply = <&vdd_cpu>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu3 {
|
||
|
+ cpu-supply = <&vdd_cpu>;
|
||
|
+};
|
||
|
+
|
||
|
+&gmac0 {
|
||
|
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||
|
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
||
|
+ assigned-clock-rates = <0>, <125000000>;
|
||
|
+ clock_in_out = "output";
|
||
|
+ phy-handle = <&rgmii_phy0>;
|
||
|
+ phy-mode = "rgmii-id";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&gmac0_miim
|
||
|
+ &gmac0_tx_bus2
|
||
|
+ &gmac0_rx_bus2
|
||
|
+ &gmac0_rgmii_clk
|
||
|
+ &gmac0_rgmii_bus>;
|
||
|
+ snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
||
|
+ snps,reset-active-low;
|
||
|
+ /* Reset time is 15ms, 50ms for rtl8211f */
|
||
|
+ snps,reset-delays-us = <0 15000 50000>;
|
||
|
+ tx_delay = <0x3c>;
|
||
|
+ rx_delay = <0x2f>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpu {
|
||
|
+ mali-supply = <&vdd_gpu>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi {
|
||
|
+ avdd-0v9-supply = <&vdda0v9_image>;
|
||
|
+ avdd-1v8-supply = <&vcca1v8_image>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_in {
|
||
|
+ hdmi_in_vp0: endpoint {
|
||
|
+ remote-endpoint = <&vp0_out_hdmi>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_out {
|
||
|
+ hdmi_out_con: endpoint {
|
||
|
+ remote-endpoint = <&hdmi_con_in>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_sound {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c0 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ vdd_cpu: regulator@1c {
|
||
|
+ compatible = "tcs,tcs4525";
|
||
|
+ reg = <0x1c>;
|
||
|
+ fcs,suspend-voltage-selector = <1>;
|
||
|
+ regulator-name = "vdd_cpu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1150000>;
|
||
|
+ regulator-ramp-delay = <2300>;
|
||
|
+ vin-supply = <&vcc5v0_sys>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ rk809: pmic@20 {
|
||
|
+ compatible = "rockchip,rk809";
|
||
|
+ reg = <0x20>;
|
||
|
+ interrupt-parent = <&gpio0>;
|
||
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
+ #clock-cells = <1>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pmic_int>;
|
||
|
+ rockchip,system-power-controller;
|
||
|
+ vcc1-supply = <&vcc3v3_sys>;
|
||
|
+ vcc2-supply = <&vcc3v3_sys>;
|
||
|
+ vcc3-supply = <&vcc3v3_sys>;
|
||
|
+ vcc4-supply = <&vcc3v3_sys>;
|
||
|
+ vcc5-supply = <&vcc3v3_sys>;
|
||
|
+ vcc6-supply = <&vcc3v3_sys>;
|
||
|
+ vcc7-supply = <&vcc3v3_sys>;
|
||
|
+ vcc8-supply = <&vcc3v3_sys>;
|
||
|
+ vcc9-supply = <&vcc3v3_sys>;
|
||
|
+ wakeup-source;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ vdd_logic: DCDC_REG1 {
|
||
|
+ regulator-name = "vdd_logic";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_gpu: DCDC_REG2 {
|
||
|
+ regulator-name = "vdd_gpu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_ddr: DCDC_REG3 {
|
||
|
+ regulator-name = "vcc_ddr";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_npu: DCDC_REG4 {
|
||
|
+ regulator-name = "vdd_npu";
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_1v8: DCDC_REG5 {
|
||
|
+ regulator-name = "vcc_1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda0v9_image: LDO_REG1 {
|
||
|
+ regulator-name = "vdda0v9_image";
|
||
|
+ regulator-min-microvolt = <950000>;
|
||
|
+ regulator-max-microvolt = <950000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda_0v9: LDO_REG2 {
|
||
|
+ regulator-name = "vdda_0v9";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda0v9_pmu: LDO_REG3 {
|
||
|
+ regulator-name = "vdda0v9_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <900000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vccio_acodec: LDO_REG4 {
|
||
|
+ regulator-name = "vccio_acodec";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vccio_sd: LDO_REG5 {
|
||
|
+ regulator-name = "vccio_sd";
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_pmu: LDO_REG6 {
|
||
|
+ regulator-name = "vcc3v3_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca_1v8: LDO_REG7 {
|
||
|
+ regulator-name = "vcca_1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca1v8_pmu: LDO_REG8 {
|
||
|
+ regulator-name = "vcca1v8_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca1v8_image: LDO_REG9 {
|
||
|
+ regulator-name = "vcca1v8_image";
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_3v3: SWITCH_REG1 {
|
||
|
+ regulator-name = "vcc_3v3";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_sd: SWITCH_REG2 {
|
||
|
+ regulator-name = "vcc3v3_sd";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c5 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ hym8563: rtc@51 {
|
||
|
+ compatible = "haoyu,hym8563";
|
||
|
+ reg = <0x51>;
|
||
|
+ interrupt-parent = <&gpio0>;
|
||
|
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
+ #clock-cells = <0>;
|
||
|
+ clock-output-names = "rtcic_32kout";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&hym8563_int>;
|
||
|
+ wakeup-source;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2s0_8ch {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2s1_8ch {
|
||
|
+ rockchip,trcm-sync-tx-only;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&mdio0 {
|
||
|
+ rgmii_phy0: ethernet-phy@1 {
|
||
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
+ reg = <1>;
|
||
|
+ pinctrl-0 = <ð_phy0_reset_pin>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ reset-assert-us = <10000>;
|
||
|
+ reset-deassert-us = <50000>;
|
||
|
+ reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie2x1 {
|
||
|
+ num-lanes = <1>;
|
||
|
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie30phy {
|
||
|
+ data-lanes = <1 2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie3x1 {
|
||
|
+ num-lanes = <1>;
|
||
|
+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie3x2 {
|
||
|
+ num-lanes = <1>;
|
||
|
+ num-ib-windows = <8>;
|
||
|
+ num-ob-windows = <8>;
|
||
|
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pinctrl {
|
||
|
+ gmac0 {
|
||
|
+ eth_phy0_reset_pin: eth-phy0-reset-pin {
|
||
|
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio-leds {
|
||
|
+ lan1_led_pin: lan1-led-pin {
|
||
|
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ lan2_led_pin: lan2-led-pin {
|
||
|
+ rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ power_led_pin: power-led-pin {
|
||
|
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wan_led_pin: wan-led-pin {
|
||
|
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ hym8563 {
|
||
|
+ hym8563_int: hym8563-int {
|
||
|
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pmic {
|
||
|
+ pmic_int: pmic-int {
|
||
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ usb {
|
||
|
+ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
|
||
|
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
||
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pmu_io_domains {
|
||
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
||
|
+ vccio1-supply = <&vccio_acodec>;
|
||
|
+ vccio3-supply = <&vccio_sd>;
|
||
|
+ vccio4-supply = <&vcc_1v8>;
|
||
|
+ vccio5-supply = <&vcc_3v3>;
|
||
|
+ vccio6-supply = <&vcc_1v8>;
|
||
|
+ vccio7-supply = <&vcc_3v3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&saradc {
|
||
|
+ vref-supply = <&vcca_1v8>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&sdhci {
|
||
|
+ bus-width = <8>;
|
||
|
+ max-frequency = <200000000>;
|
||
|
+ non-removable;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&sdmmc0 {
|
||
|
+ max-frequency = <150000000>;
|
||
|
+ no-sdio;
|
||
|
+ no-mmc;
|
||
|
+ bus-width = <4>;
|
||
|
+ cap-mmc-highspeed;
|
||
|
+ cap-sd-highspeed;
|
||
|
+ disable-wp;
|
||
|
+ vmmc-supply = <&vcc3v3_sd>;
|
||
|
+ vqmmc-supply = <&vccio_sd>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&tsadc {
|
||
|
+ rockchip,hw-tshut-mode = <1>;
|
||
|
+ rockchip,hw-tshut-polarity = <0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ehci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ohci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_xhci {
|
||
|
+ extcon = <&usb2phy0>;
|
||
|
+ dr_mode = "host";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host1_ehci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host1_ohci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host1_xhci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy0 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy0_host {
|
||
|
+ phy-supply = <&vcc5v0_usb_host>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy0_otg {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy1_host {
|
||
|
+ phy-supply = <&vcc5v0_usb_otg>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb2phy1_otg {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&vop {
|
||
|
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||
|
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&vop_mmu {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&vp0 {
|
||
|
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||
|
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||
|
+ remote-endpoint = <&hdmi_in_vp0>;
|
||
|
+ };
|
||
|
+};
|