openwrt/target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts

81 lines
1.4 KiB
Plaintext
Raw Normal View History

#include "mt7621_ubnt_edgerouter-x.dtsi"
/ {
model = "Ubiquiti EdgeRouter X SFP";
compatible = "ubnt,edgerouter-x-sfp", "mediatek,mt7621-soc";
sfp_eth5: sfp_eth5 {
compatible = "sff,sfp";
i2c-bus = <&i2c>;
mod-def0-gpio = <&expander0 5 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <1000>;
};
};
&i2c {
status = "okay";
/*
* PCA9655 GPIO expander
* 0-POE power port eth0
* 1-POE power port eth1
* 2-POE power port eth2
* 3-POE power port eth3
* 4-POE power port eth4
* 5-SFP_MOD_DEF0#
* 6-
* 7-
* 8-Pull up to VCC
* 9-Pull down to GND
* 10-Pull down to GND
* 11-Pull down to GND
* 12-Pull down to GND
* 13-Pull down to GND
* 14-Pull down to GND
* 15-Pull down to GND
*/
expander0: pca9555@25 {
compatible = "nxp,pca9555";
interrupt-parent = <&gpio>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
reg = <0x25>;
};
};
&gpio {
sfp_i2c_clk_gate {
gpio-hog;
gpios = <7 GPIO_ACTIVE_LOW>;
output-high;
};
};
&mdio {
ephy7: ethernet-phy@7 {
reg = <7>;
sfp = <&sfp_eth5>;
};
};
&rgmii2_pins {
rgmii2 {
function = "gpio";
};
};
&switch0 {
ports {
port@5 {
reg = <5>;
openwrt,netdev-name = "eth5";
phy-handle = <&ephy7>;
phy-mode = "rgmii-rxid";
nvmem-cells = <&macaddr_factory_22 5>;
nvmem-cell-names = "mac-address";
/delete-property/ label;
};
};
};