openwrt/target/linux/bcm27xx/patches-6.6/950-0496-rtc-rv3028-Add-backup-switchover-mode-support.patch

From 9113b57d7b8ef97bd25d3b8482cfd870d70f0545 Mon Sep 17 00:00:00 2001
From: Phil Howard <phil@gadgetoid.com>
Date: Fri, 29 Mar 2019 10:53:14 +0000
Subject: [PATCH 0496/1085] rtc: rv3028: Add backup switchover mode support

Signed-off-by: Phil Howard <phil@pimoroni.com>
---
 drivers/rtc/rtc-rv3028.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/drivers/rtc/rtc-rv3028.c
+++ b/drivers/rtc/rtc-rv3028.c
@@ -858,16 +858,17 @@ static const struct regmap_config regmap
 static u8 rv3028_set_trickle_charger(struct rv3028_data *rv3028,
 				     struct i2c_client *client)
 {
-	int ret, val_old, val;
+	int ret, val_old, val, val_mask;
 	u32 ohms, chargeable;
+	u32 bsm;
 
 	ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &val_old);
 	if (ret < 0)
 		return ret;
 
 	/* mask out only trickle charger bits */
-	val_old = val_old & (RV3028_BACKUP_TCE | RV3028_BACKUP_TCR_MASK);
-	val = val_old;
+	val_mask = RV3028_BACKUP_TCE | RV3028_BACKUP_TCR_MASK;
+	val = val_old & val_mask;
 
 	/* setup trickle charger */
 	if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms",
@@ -902,10 +903,21 @@ static u8 rv3028_set_trickle_charger(str
 		}
 	}
 
+	/* setup backup switchover mode */
+	if (!device_property_read_u32(&client->dev,
+				      "backup-switchover-mode",
+				      &bsm)) {
+		if (bsm <= 3) {
+			val_mask |= RV3028_BACKUP_BSM;
+			val |= (u8)(bsm << 2);
+		} else {
+			dev_warn(&client->dev, "invalid backup switchover mode value\n");
+		}
+	}
+
 	/* only update EEPROM if changes are necessary */
-	if (val_old != val) {
-		ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE |
-						RV3028_BACKUP_TCR_MASK, val);
+	if ((val_old & val_mask) != val) {
+		ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, val_mask, val);
 		if (ret)
 			return ret;
 	}