openwrt/target/linux/ipq806x/patches-4.9/0021-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch

From 644ad7209637b02a0ca6d72f0715a9f52532fc70 Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Fri, 8 Apr 2016 15:26:10 -0500
Subject: [PATCH 21/69] qcom: ipq4019: use v2 of the kpss bringup mechanism

v1 was the incorrect choice here and sometimes the board would not come
up properly

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -34,7 +34,8 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 			reg = <0x0>;
@@ -46,7 +47,8 @@
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 			reg = <0x1>;
@@ -58,7 +60,8 @@
 		cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
 			reg = <0x2>;
@@ -70,7 +73,8 @@
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			enable-method = "qcom,kpss-acc-v1";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
 			reg = <0x3>;
@@ -100,6 +104,12 @@
 			opp-hz = /bits/ 64 <666000000>;
 			clock-latency-ns = <256000>;
 		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
 	};
 
 	pmu {
@@ -212,22 +222,22 @@
 		};
 
                 acc0: clock-controller@b088000 {
-                        compatible = "qcom,kpss-acc-v1";
+                        compatible = "qcom,kpss-acc-v2";
                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
                 };
 
                 acc1: clock-controller@b098000 {
-                        compatible = "qcom,kpss-acc-v1";
+                        compatible = "qcom,kpss-acc-v2";
                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
                 };
 
                 acc2: clock-controller@b0a8000 {
-                        compatible = "qcom,kpss-acc-v1";
+                        compatible = "qcom,kpss-acc-v2";
                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
                 };
 
                 acc3: clock-controller@b0b8000 {
-                        compatible = "qcom,kpss-acc-v1";
+                        compatible = "qcom,kpss-acc-v2";
                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
                 };
 
@@ -255,6 +265,12 @@
                         regulator;
                 };
 
+		saw_l2: regulator@b012000 {
+			compatible = "qcom,saw2";
+			reg = <0xb012000 0x1000>;
+			regulator;
+		};
+
 		serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;