ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 23:12:32 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
5fe80218f9
openwrt/package/boot/uboot-fritz4040/Makefile

83 lines
2.0 KiB
Makefile
Raw Normal View History

uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
#
# Copyright (C) 2013-2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_SOURCE_URL:=https://github.com/chunkeey/FritzBox-4040-UBOOT
PKG_SOURCE_PROTO:=git
uboot-fritz4040: Add support for Toshiba NAND From Andreas Böhler: "Some revisions of the FRITZ!7530 use a Toshiba NAND with 8 bit ECC in contrast to the Macronix NAND with 4 bit ECC.". Uboot needs to know this in order to have a chance to load from the NAND. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-13 19:44:30 +00:00
PKG_SOURCE_VERSION:=9d89013f9cc963eca25856c61fa066091d35f8de
PKG_SOURCE_DATE:=2022-05-01
PKG_MIRROR_HASH:=4f2a3782ba359e6d901b536d1d685026913c14426f8e58ba9673281f20675050
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
treewide: replace AUTORELEASE with real PKG_RELEASE Based on Paul Fertser <fercerpav@gmail.com>'s guidance: Change AUTORELEASE in rules.mk to: ``` AUTORELEASE = $(if $(DUMP),0,$(shell sed -i "s/\$$(AUTORELEASE)/$(call commitcount,1)/" $(CURDIR)/Makefile)) ``` then update all affected packages by: ``` for i in $(git grep -l PKG_RELEASE:=.*AUTORELEASE | sed 's^.*/\([^/]*\)/Makefile^\1^';); do make package/$i/clean done ``` Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2023-05-17 13:08:40 +00:00
PKG_RELEASE:=5
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
include $(INCLUDE_DIR)/u-boot.mk
include $(INCLUDE_DIR)/package.mk
define U-Boot/Default
ipq40xx: add target Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: John Crispin <john@phrozen.org>
2018-02-21 19:40:50 +00:00
BUILD_TARGET:=ipq40xx
uboot-fritz4040: build with ipq40xx "generic" subtarget Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget") Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-09-06 08:29:50 +00:00
BUILD_SUBTARGET:=generic
uboot-fritz4040: bump version to 2019-02-08 Adds support for the AVM FRITZ!Box 7530. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [PKG_RELEASE]
2019-02-18 22:58:33 +00:00
UBOOT_BOARD:=$(1)
UBOOT_IMAGE:=uboot-$(1).bin
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
endef
ipq40xx: add support for AVM FRITZ!Repeater 1200 Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
2019-09-10 19:07:23 +00:00
define U-Boot/fritz1200
NAME:=FritzRepeater 1200
BUILD_DEVICES:=avm_fritzrepeater-1200
endef
ipq40xx: add support for AVM FRITZ!Repeater 3000 Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M (NANYA NT5CC128M16JR-EK) FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI) ETH: Qualcomm QCA8072 WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac WiFi5: QCA9984 4T4R 4SS n/ac LED: - Connect green/blue/red - Power green BTN: WPS/Connect UART: 115200n8 3.3V VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz3000' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ3000.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz3000.bin uboot0 > mtd write /path/to/uboot-fritz3000.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
2019-03-11 17:05:32 +00:00
define U-Boot/fritz3000
NAME:=FritzRepeater 3000
BUILD_DEVICES:=avm_fritzrepeater-3000
endef
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
define U-Boot/fritz4040
NAME:=FritzBox 4040
ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from there) to fix image generation using the image-builder. Also remove the bootloader from DEVICE_PACKAGES and instead use the BUILD_DEVICES directive from within the U-Boot makefile. This fixes eva-image generation using the OpenWRT image-builder. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-04 20:17:20 +00:00
BUILD_DEVICES:=avm_fritzbox-4040
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
endef
uboot-fritz4040: build FritzBox 7520 variant Support was added as variant of 7530 (DEVICE_ALT0_*) in: cb6f4be1 "ipq40xx: add support for FRITZ!Box 7520" u-boot has a distinct config for it [0], built it. [0] https://github.com/chunkeey/FritzBox-4040-UBOOT/pull/6 Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-07-15 05:59:15 +00:00
define U-Boot/fritz7520
NAME:=FritzBox 7520
BUILD_DEVICES:=avm_fritzbox-7530
endef
ipq40xx: add support for FritzBox 7530 Hardware -------- CPU: Qualcomm IPQ4019 RAM: 256M FLASH: 128M NAND ETH: QCA8075 VDSL: Intel/Lantiq VRX518 PCIe attached currently not supported DECT: Dialog SC14448 currently not supported WiFi2: IPQ4019 2T2R 2SS b/g/n WiFi5: IPQ4019 2T2R 2SS n/ac LED: - Power/DSL green - WLAN green - FON/DECT green - Connect/WPS green - Info green - Info red BTN: - WLAN - FON - WPS/Connect UART: 115200n8 3.3V (located under the Dialog chip) VCC - RX - TX - GND (Square is VCC) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz7530' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ7530.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz7530.bin uboot0 > mtd write /path/to/uboot-fritz7530.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> [removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-02-18 22:58:34 +00:00
define U-Boot/fritz7530
NAME:=FritzBox 7530
BUILD_DEVICES:=avm_fritzbox-7530
endef
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
uboot-fritz4040: Fix build with HOSTCFLAGS When we provide the HOSTCFLAGS to the U-Boot build it will fail because it can not find the u-boot provided header files any more. Just overwrite and not append the package specific configuration on top of the configuration provided by u-boot.mk. uboot-fritz4040 is based on U-Boot 2012.07 and this problem is probably similar to the problem seen with the lantiq and ar71xx u-boot build. Fixes: df9781a4205 ("u-boot,at91bootstrap: fix incorrect HOSTCPPFLAGS variable") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-10 23:52:08 +00:00
UBOOT_MAKE_FLAGS = USE_PRIVATE_LIBGCC=yes
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
export DTC
define Build/Configure
$(Build/Configure/U-Boot)
uboot-fritz4040: Add host flags for host compiler This adds the host staging directory to the include path to make it use the zlib.h files from the staging include directory and also link against the zlib version from the staging directory. This fixes a compile problem when the zlib header were not installed on the build host. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [picked from openwrt-18.06]
2019-05-17 19:32:50 +00:00
$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $(PKG_BUILD_DIR)/fritz/lzma2eva $(PKG_BUILD_DIR)/fritz/src/lzma2eva.c -lz
$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $(PKG_BUILD_DIR)/fritz/tichksum $(PKG_BUILD_DIR)/fritz/src/tichksum.c
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
ln -sf $(STAGING_DIR_HOST)/bin/lzma $(PKG_BUILD_DIR)/fritz
endef
define Build/Compile
$(Build/Compile/U-Boot)
uboot-fritz4040: bump version to 2019-02-08 Adds support for the AVM FRITZ!Box 7530. Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [PKG_RELEASE]
2019-02-18 22:58:33 +00:00
(cd $(PKG_BUILD_DIR); ./fritz/fritzcreator.sh $(UBOOT_BOARD);)
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
endef
ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from there) to fix image generation using the image-builder. Also remove the bootloader from DEVICE_PACKAGES and instead use the BUILD_DEVICES directive from within the U-Boot makefile. This fixes eva-image generation using the OpenWRT image-builder. Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-04 20:17:20 +00:00
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(CP) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(UBOOT_IMAGE)
endef
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
define Package/u-boot/install
$(Package/u-boot/install/default)
uboot-fritz4040: update package to 2018-12-09 This patch updates the uboot-fritz4040 package to the latest version. The portability and private-libgcc patches, as well as the upload-to-f4040.sh script have been added to the upstream repository. Furthermore, the upload-to-f4040 has been updated to take the first parameter as the file it is supposed to flash, otherwise it defaults to the previous "uboot-fritz4040.bin". Furthermore the error messages have been improved and ftp will now dump some "progress information" to the user's console. Also included is support for gcc 8+ and a fix for the obnoxous error that currently breaks the builders: | fritz/src/lzma2eva.c:23:30: fatal error: zlib.h: No such file or directory Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-11 22:00:07 +00:00
$(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
endef
uboot-fritz4040: build FritzBox 7520 variant Support was added as variant of 7530 (DEVICE_ALT0_*) in: cb6f4be1 "ipq40xx: add support for FRITZ!Box 7520" u-boot has a distinct config for it [0], built it. [0] https://github.com/chunkeey/FritzBox-4040-UBOOT/pull/6 Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-07-15 05:59:15 +00:00
UBOOT_TARGETS := fritz1200 fritz3000 fritz4040 fritz7520 fritz7530
uboot-fritz4040: add an ipq806x u-boot for FritzBox 4040 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-14 09:19:17 +00:00
$(eval $(call BuildPackage/U-Boot))
Reference in New Issue Copy Permalink