octeon: add support for Itus Shield Router
Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC,
1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports
Information regarding device can be found:
https://deviwiki.com/wiki/Itus_Networks_Shield_Pro
Installing OpenWrt on Itus Networks Shield:
1) Boot Shield
2) On device: mount /dev/mmcblk1p1 /mnt
3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to
/mnt/ItusrouterImage
3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin
to /mnt/ItusgatewayImage to allow you to have an emergency recovery
boot in the GATEWAY slot - this slot will have no permament storage and
is used for emergency recovery only when booted in the (G)ateway
position
4) On device: umount /mnt
5) reboot
Once booted, run the sysupgrade via cli or luCi on the
openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode
you are running.
Once rebooted, the system installation is complete. Your storage partition
for the mode is inialized and set.
Signed-off-by: Donald Hoskins <grommish@gmail.com>
[cut out sysupgrade-* changes, move a few lines,
drop case CVMX_BOARD_TYPE_ITUS_SHIELD]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-22 09:26:33 +00:00
|
|
|
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
|
|
|
|
|
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
|
|
|
|
|
@@ -297,7 +297,7 @@ enum cvmx_board_types_enum {
|
|
|
|
|
CVMX_BOARD_TYPE_UBNT_E100 = 20002,
|
|
|
|
|
CVMX_BOARD_TYPE_UBNT_E200 = 20003,
|
|
|
|
|
CVMX_BOARD_TYPE_UBNT_E220 = 20005,
|
|
|
|
|
- CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
|
|
|
|
|
+ CVMX_BOARD_TYPE_ITUS_SHIELD = 20006,
|
|
|
|
|
CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
|
|
|
|
|
CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
|
|
|
|
|
|
|
|
|
|
@@ -400,7 +400,7 @@ static inline const char *cvmx_board_typ
|
|
|
|
|
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
|
|
|
|
|
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
|
|
|
|
|
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
|
|
|
|
|
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
|
|
|
|
|
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_ITUS_SHIELD)
|
|
|
|
|
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
|
|
|
|
|
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
|
|
|
|
|
}
|
|
|
|
|
--- a/arch/mips/cavium-octeon/octeon-platform.c
|
|
|
|
|
+++ b/arch/mips/cavium-octeon/octeon-platform.c
|
2022-02-12 16:01:04 +00:00
|
|
|
@@ -773,7 +773,7 @@ int __init octeon_prune_device_tree(void
|
octeon: add support for Itus Shield Router
Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC,
1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports
Information regarding device can be found:
https://deviwiki.com/wiki/Itus_Networks_Shield_Pro
Installing OpenWrt on Itus Networks Shield:
1) Boot Shield
2) On device: mount /dev/mmcblk1p1 /mnt
3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to
/mnt/ItusrouterImage
3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin
to /mnt/ItusgatewayImage to allow you to have an emergency recovery
boot in the GATEWAY slot - this slot will have no permament storage and
is used for emergency recovery only when booted in the (G)ateway
position
4) On device: umount /mnt
5) reboot
Once booted, run the sysupgrade via cli or luCi on the
openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode
you are running.
Once rebooted, the system installation is complete. Your storage partition
for the mode is inialized and set.
Signed-off-by: Donald Hoskins <grommish@gmail.com>
[cut out sysupgrade-* changes, move a few lines,
drop case CVMX_BOARD_TYPE_ITUS_SHIELD]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-22 09:26:33 +00:00
|
|
|
if (fdt_check_header(initial_boot_params))
|
|
|
|
|
panic("Corrupt Device Tree.");
|
|
|
|
|
|
|
|
|
|
- WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N,
|
|
|
|
|
+ WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_ITUS_SHIELD,
|
|
|
|
|
"Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.",
|
|
|
|
|
cvmx_board_type_to_string(octeon_bootinfo->board_type));
|
|
|
|
|
|
|
|
|
|
--- a/arch/mips/pci/pci-octeon.c
|
|
|
|
|
+++ b/arch/mips/pci/pci-octeon.c
|
|
|
|
|
@@ -211,8 +211,6 @@ const char *octeon_get_pci_interrupts(vo
|
|
|
|
|
return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
|
|
|
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
|
|
|
return "AABCD";
|
|
|
|
|
- case CVMX_BOARD_TYPE_CUST_DSR1000N:
|
|
|
|
|
- return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
|
|
|
|
|
case CVMX_BOARD_TYPE_THUNDER:
|
|
|
|
|
case CVMX_BOARD_TYPE_EBH3000:
|
|
|
|
|
default:
|
