openwrt/target/linux/ath79/dts/qca9563_nec_wg1200cr.dts

173 lines
2.8 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
model = "NEC Aterm WG1200CR";
compatible = "nec,wg1200cr", "qca,qca9563";
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
leds {
compatible = "gpio-leds";
/* other LEDs are connected to ath10k (QCA9888) gpiochip */
power_green: power_green {
label = "wg1200cr:green:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_red: power_red {
label = "wg1200cr:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
bridge {
label = "br";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
converter {
label = "cnv";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "devdata";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "devconf";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "misc";
reg = <0x060000 0x010000>;
read-only;
};
partition@70000 {
label = "wifimngdata";
reg = <0x070000 0x010000>;
read-only;
};
partition@80000 {
compatible = "seama";
label = "firmware";
reg = <0x080000 0x770000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00000080 /* PORT0 PAD MODE CTRL */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xca35ca35 /* LED_CTRL1 */
0x58 0xc935c935 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0056";
reg = <0x0000 0 0 0 0>;
};
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};